-
1.
PHYSICAL AND MECHANICAL PROPERTIES OF Al-Al2O3 CERMET WITH A HETEROGENEOUS GRANULE-LAYERED STRUCTURE PRODUCED USING MECHANICAL ALLOYING AND VACUUM SINTERING
-
(Not-set)
-
To produce Al–Al2O3 cermet with a heterogeneous granular-layered structure, mixing of flake aluminum powder of the PAP-2 brand with the plasma-chemical alumina powder (PCAP) consisting of nano-thick lamellar ...
-
2.
INFLUENCE OF NANODISPERSED ALUMINUM OXIDE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF TECHNICAL CERAMICS
-
(Not-set)
-
The article presents the results of a study on the development of a composition of technical ceramics for ceramic grinding bodies and the influence of dispersed oxide on its basic properties. It is shown ...
-
3.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC COMPOSITE MATERIAL BASED ON Al6Si2O13–ZrSiO4
-
(Not-set)
-
Composite ceramic materials based on SiO2–Al2O3–ZrO2 nanopowders were obtained by sintering and their properties were studied. Before sintering, the powders were subjected to mechanical activation in a ...
-
4.
PHYSICAL AND MECHANICAL CHARACTERISTICS OF CERAMIC MATERIALS OF SYSTEMS ZrO2–Sm2O3 TWO-PHASE COMPOSITION
-
(Not-set)
-
Ceramic Materials of Compositions (mol. %) 97ZrO2–3Sm2O3 and 94ZrO2–6Sm2O3 based on nanosized powders synthesized by hydrolysis sol-gel method are obtained. It is shown that in ceramic materials a two-phase ...
-
5.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC TILE IN THE COMPOSITION CLAY–DUNE SAND
-
(Not-set)
-
The article investigates the physical, mechanical and technological properties of ceramic plates in the composition of Kulatau clay and dune sands of the Tuprakkala massif located in the lower amudarya ...
-
6.
Physico-Mechanical and Electrophysical Properties of Porous Glass Composites with Silicon Carbide Additives
-
(Not-set)
-
The influence of silicon carbide (10 & # 8211; 40 & # 37; by mass) on the physical-mechanical and electro-physical characteristics of composites is considered. The effect of the additive on the radio absorption ...
-
7.
Physical and Chemical Researches of Raw Materials of the Far East of Russia for Synthesis on Their Basis of Foam Glass and Protective Enamel Coatings
-
(Raw materials)
-
Investigations of the physicochemical properties of silica-containing raw materials from the Russian Far East, suitable for the synthesis of foam glass and protective enamel coatings for oil and gas pipelines, ...
-
8.
Physical and mechanical properties of light-curing composite materials
-
(Biomaterials)
-
... indicated. The composition of the developed material is presented, as well as some technological aspects of its production. The study of the physical and mechanical properties of the developed composite ...
-
9.
STUDY OF PHYSICO-CHEMICAL AND THERMOMECHANICAL CHARACTERISTICS OF BASALT ROCKS OF THE SHEKHZHELI DEPOSIT
-
(Not-set)
-
The article presents the results of a study on the elemental and chemical–mineralogical composition, as well as the structure and morphology of samples of Shekhzheli basalt, using chemical analysis, X-ray ...
-
10.
PHYSICO-MECHANICAL PROPERTIES OF BORON COATINGS DEPOSITED IN AN ATMOSPHERE OF VARIOUS GASES BY AN ELECTRON BEAM IN A FOREVACUUM
-
(Not-set)
-
The paper presents the results on the formation of boron-based coatings by precipitation of target material from a vapor-plasma phase formed by electron beam exposure to a solid-state target in the forevacuum ...
-
11.
RESEARCH OF DOMESTIC BORON CARBIDE POWDERS FOR THE PRODUCTION OF REACTION-BONDED CERAMICS
-
(Not-set)
-
The article discussed the problem of manufacturing boron carbide ceramics with high physical and mechanical characteristics. The problem of choosing raw powders and ceramic manufacturing technology is ...
-
12.
RESEARCH OF THE DEPENDENCE OF THE THERMAL STRENGTH PROPERTIES OF REFRACTORY MATERIALS OF THE LADLE LINING OF THE FERROALLOY PRODUCTION ON TEMPERATURE
-
(Not-set)
-
The article is devoted to the study of the dependence of the change in compressive strength on temperature for refractory materials of the lining of a pouring ladle of ferroalloy production – fireclay ...
-
13.
SYNTHESIS OF MULLITE-SILICA CERAMICS WITH ENHANCED ELECTROPHYSICAL PROPERTIES
-
(Not-set)
-
Presents the results of the synthesis of mullite-silica ceramics with improved electrophysical characteristics based on natural kaolinite raw materials extracted in the Orenburg region. The main attention ...
-
14.
EFFECTS OF BINARY OXIDE COATED MWCNTS TOWARD TAILORING THE MECHANICAL, THERMO-MECHANICAL, AND MICROSTRUCTURAL PROPERTIES OF PRESSURELESS SINTERED MgAl2O4 SPINEL CERAMIC COMPOSITE
-
(Not-set)
-
... fabricated using a pressureless sintering technique. The physical properties, including porosity, bulk density, and flexural strength of spinel composites were evaluated in the temperature range of 1500 ...
-
15.
NANOCRYTALLINE GLASS CERAMICS BASED ON PERLITE: SYNTHESIS AND RESEARCH
-
(Not-set)
-
From a cheap perlite as the basic raw material an opaque glass-crystalline material was synthesized containing nanosized crystals of wollastonite and gehlenite with an average size of 100 nm. The phase ...
-
16.
MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF OPAQUE CERAMIC TILES GLAZED WITH SOME INDUSTRIAL WASTES
-
(Not-set)
-
The primary goal of this research is to determine the mechanical properties of opaque glazed ceramic tiles containing fly ash, tincal waste, and recycled red clay, including to assess if the results meet ...
-
17.
RESEARCH INFLUENCE OF THERMAL PLASMA ENERGY ON MORPHOLOGY AND PHASE COMPOSITION ALUMINUM SILICATE MICROSPHERES
-
(Not-set)
-
... powder based on the ash residue of a state district power station in a thermal plasma flow with different thermophysical characteristics of the carrier medium, three types of morphological features of ...
-
18.
INFLUENCE OF CARBON NANOSUBSTRUCTURES ON THE PHYSICAL AND EXPLOITATION PROPERTIES IN STRUCTURAL CERAMICS IN THE Al2O3–ZrO2 SYSTEM
-
(Not-set)
-
The influence of the concentration of decorated carbon nanotubes and the influence of the concentration of eutectic additives, as well as the effect of the firing regime on the strength characteristics ...
-
19.
The Phase Composition and Physico-Mechanical Properties at Different Temperatures of Ceramic Firing Earthquake-Resistant Bricks Using Ferroli
-
(Not-set)
-
Ceramic bricks based on low-melting clay and ferro-dust were obtained from self-decaying slags of low-carbon ferrochrome in the temperature range 950 - 1100 ° C, which have grades from M100 to M175, respectively. ...
-
20.
Development and Research of Properties of Impact-Resistant Ceramic Nanocomposite Coat-ings for Silicon
-
(Not-set)
-
The results of studies of the structural-phase state and physicomechanical properties of coatings of the Al-Si-N and Zr-YO systems with a thickness of 3 ?m, obtained by the method of pulsed magnetron deposition ...
