-
21.
Study of spark-plasma sintered composite ceramics properties in SiC?ZrB2 system
-
(Science for ceramic production)
-
Experimental samples of ceramic composite materials in the SiC-ZrB 2 system with additions of graphite and aluminum nitride were obtained by the method of spark plasma sintering. The physical and mechanical ...
-
22.
Comparative analysis of plasma-sprayed bioceramic coatings based on zinc-doped hydroxyapatite and tricalcium phosphate
-
(Biomaterials)
-
The results of X-ray diffraction and infrared analyzes of powders of zinc-substituted hydroxyapatite and tricalcium phosphate are presented, and the technology of plasma spraying of coatings based on them ...
-
23.
Research of hollow microspheres obtained from Kemerovo re-gion CHP plant ash and slag waste in thermal plasma stream
-
(Utilization of waste)
-
The processes occurring during the formation of hollow microspheres based on ash and slag waste from thermal power plants of the Kemerovo region in a thermal plasma flow are considered. The results of ...
-
24.
Quarts sand melting process studies through cool plasma energy
-
(At the enterprises and institutes)
-
The possibilities of obtaining and producing a high-temperature silicate melt from quartz sand of the Tugan deposit (Tomsk region) using the energy of low-temperature plasma have been investigated.
-
25.
Comprehensive analysis of quartz-feldspar raw material and its plasma-molten derivative
-
(At the enterprises and institutes)
-
The processes occurring during the plasma-chemical synthesis of melts from quartz-feldspar-containing raw materials in order to obtain new building materials with increased operational properties are considered. ...
-
26.
Production of mineral fibers from Kazakhstan ash in low-energy plasma units
-
(Utilization of waste)
-
A technology has been developed for the disposal of ash and slag wastes of the Republic of Kazakhstan in the production of mineral fibers using an electroplasma installation for melting silicate-containing ...
-
27.
Mineral fiber fabricated with low-energy plasma
-
(At the enterprises and institutes)
-
The properties of basalt fiber obtained using low-temperature plasma have been investigated. Basalt wool has good physical and mechanical properties. Its chemical stability depends on the composition of ...
-
28.
Properties of mullite-zirconia ceramics obtained by spark plasma sintering
-
(Science for ceramic production)
-
... powders after grinding and synthesis in a reactor using illite clay as a binding agent in depending on the temperature regime during spark plasma sintering.
The results of X-ray phase analysis indicate ...
-
29.
Recycling technology of mineral fiber production from ashes and slag waste and combustible shale waste
-
(Utilization of waste)
-
The technology of utilization of ash and slag waste and waste of oil shale in the production of mineral fibers using an electroplasma installation for melting silicate-containing materials and a scheme ...
-
30.
Processes occurring upon plasma-chemical synthesis of refractory silicate materials
-
(Science for ceramic production)
-
The processes occurring in the plasma-chemical synthesis of melts from silicate-containing materials, as well as technological modes in the production of silicate refractory melts using highly concentrated ...
-
31.
Plasma-electric unit intended for mineral fiber production from refractory silicate-containing materials
-
(Utilization of waste)
-
... the plasma-chemical reactor have been determined. A comparison is made of the performance characteristics of the fiber obtained at the facility and by the traditional technology. Tab. 3, ill. 2, bibliography: ...
-
32.
Application of alternative energy sources in technology of glass and glass ceramic materials
-
(Energy saving)
-
The results of the use of alternative energy sources in the technology of glass and glass-crystalline materials are presented. It is shown that in the process of plasma spraying of glass powders on household ...
-
33.
Engobe coating of wall ceramics using plasma spraying
-
(Science for ceramic production)
-
The technology of engobing of wall ceramics by the method of plasma spraying of powders of white-burning clays and kaolins with a fractional composition of 30 - 250 microns has been developed. Tab. 4, ...
-
34.
INFLUENCE OF THE PURITY OF THE RAW MATERIALS SrCO3 AND TiO2 ON SOLID-STATE SYNTHESIS AND PROPERTIES OF SrTiO3 CERAMICS
-
(Not-set)
-
Commercially available reagents for the solid-phase synthesis of strontium titanate in Russia have been studied using X-ray phase analysis, inductively coupled plasma mass spectrometry, X-ray fluorescence ...
-
35.
INVESTIGATION OF PHASE TRANSFORMATION ASPECTS IN THE REACTIVE SINTERING OF ZIRCONIUM DIBORIDE AND ZIRCONIUM CARBIDE
-
(Not-set)
-
Reactive sintering (siliconizing) at 1550?°C was employed to produce composite materials in the SiC–ZrB2 and SiC–ZrC systems. The influence of the initial zirconium compound on phase transformations, microstructure, ...
-
36.
ELECTRON BEAM SINTERING OF ALUMINA-BASED COMPOSITE CERAMICS WITH COPPER ADDITION IN THE FORE-VACUUM PRESSURE RANGE
-
(Not-set)
-
The effect of electron-beam sintering in the fore-vacuum pressure range (8…10 Pa) on the density, structure, and phase composition of the sintered Al2O3–Cu composite with a component mass ratio of 10:1 ...
-
37.
PHYSICO-MECHANICAL PROPERTIES OF BORON COATINGS DEPOSITED IN AN ATMOSPHERE OF VARIOUS GASES BY AN ELECTRON BEAM IN A FOREVACUUM
-
(Not-set)
-
The paper presents the results on the formation of boron-based coatings by precipitation of target material from a vapor-plasma phase formed by electron beam exposure to a solid-state target in the forevacuum ...
-
38.
PHYSICAL AND MECHANICAL PROPERTIES OF Al-Al2O3 CERMET WITH A HETEROGENEOUS GRANULE-LAYERED STRUCTURE PRODUCED USING MECHANICAL ALLOYING AND VACUUM SINTERING
-
(Not-set)
-
To produce Al–Al2O3 cermet with a heterogeneous granular-layered structure, mixing of flake aluminum powder of the PAP-2 brand with the plasma-chemical alumina powder (PCAP) consisting of nano-thick lamellar ...
-
39.
ON HIGH-TECH APPLICATIONS OF ZIRCONIUM DIOXIDE, PARTIALLY STABILIZED WITH YTTRIUM OXIDE (REVIEW)
-
(Not-set)
-
... excellent resistance to extreme temperature loads, making it an ideal solution for protecting critical components. Various methods of applying such coatings, including plasma spraying and chemical deposition ...
-
40.
SYNTHESIS OF ALUMINUM-MAGNESIUM SPINEL FROM XEROGELS OBTAINED FROM ALUMINUM AND MAGNESIUM CHLORIDES AND NITRATES IN THE PRESENCE OF CITRIC ACID
-
(Not-set)
-
The effect of a combination of water-soluble magnesium and aluminum salts on the physicochemical properties of the obtained aluminomagnesium spinel was studied. It was shown that the formation of aluminomagnesium ...
