-
21.
Monophase high-purity dense ceramics production from high-sintering complex oxides
-
(Science for ceramic production)
-
Sintering of advanced materials. Fundamentals and processes / еd. by ZZ Fang. Cambridge: Woodhead Publishing Limited, 2010.483 p.
Belyakov A.V. Synergetic and quasi-chemical approaches in ceramics technology ...
-
22.
Fabrication of optically transparent Yb3+ : Lu2O3 -ceramics by spark plasma sintering
-
(Science for ceramic production)
-
It is reported about the production of optical ceramics from lutetium oxide doped with ytterbium using spark plasma sintering. The starting material was Yb 3+ : Lu 2 O 3 nanopowder synthesized by ...
-
23.
Nano-sized B2O3-based sintering additive for alumomagnesian spinel ceramics
-
(Science for ceramic production)
-
The results of a study of the effect of B 2 O 3 as a sintering additive at the initial stages of the formation of optical ceramics from aluminum-magnesium spinel (AMS) are presented. It is shown that ...
-
24.
Process features of making silicon carbide ceramics by liquid-phase sintering (a review)
-
(Science for ceramic production)
-
The possibility of obtaining ceramics based on silicon carbide by liquid-phase sintering by modifying it with additives of eutectic compositions is considered. It is shown that the synthesized samples ...
-
25.
Sintering and crystallization processes in strontium-anortite ceramics production
-
(Glassceramics)
-
The processes of crystallization and sintering, occurring during firing, during the production of strontium-anorthite glass-ceramics by the method of powder technology, have been studied. The character ...
-
26.
Properties of mullite-zirconia ceramics obtained by spark plasma sintering
-
(Science for ceramic production)
-
... powders after grinding and synthesis in a reactor using illite clay as a binding agent in depending on the temperature regime during spark plasma sintering.
The results of X-ray phase analysis indicate ...
-
27.
Features of sintering oxide ceramicsx
-
(Science for ceramic production)
-
The sintering process of powder workpieces based on oxide ceramics is considered from the standpoint of diffusion mass transfer. In practice, two types of powders are used, differing in manufacturing methods. ...
-
28.
Effect of kolemanite additives on the properties, microstructure and sintering of heat-resistant spodumene ceramics
-
(Science for ceramic production)
-
The influence of colemanite additives on sintering, properties and microstructure of spodumene ceramics has been investigated. It has been established that the introduction of colemanite in an amount of ...
-
29.
Special technological features of dense technical ceramics. Sintering of oxide ceramics
-
(Science for ceramic production)
-
The processes of activated sintering of oxide powders with different histories are considered. It is shown that there are two regions of particle sizes, more or less than 1 ?m, in which the mechanisms ...
-
30.
Ultrasonic sintering of ceramics
-
(Science for ceramic production)
-
Sintering of heat-resistant beryllium oxide ceramics, formed by hot casting with the use of intense ultrasound, has been studied. It was found that changes associated with the homogenization of the material ...
-
31.
Calcium phosphate based ceramics with reduced sintering temperature containing a resorbing phase
-
(Ceramics for medical science)
-
The use of glasses of eutectic compositions in the CaO - P 2 O 5 system as a sintering additive and a source of a resorbable phase for obtaining a composite biomaterial for bone implants is considered. ...
-
32.
Correlation of change in the linear dimensions and bulk phase composition of ceramics upon sintering
-
(Science for ceramic production)
-
The results of dilatometric studies of the sintering process of ceramics based on perlite rock and window glass under isothermal conditions are presented. It is shown that the change in the geometric dimensions ...
-
33.
The effect of presynthesized powder additives in combined synthesis and sintering of SrZrO3 ceramics
-
(Science for ceramic production)
-
It was shown that the addition to the initial mixture of SrCO 3 and ZrO 2 , taken in a stoichiometric ratio to obtain SrZrO 3 , of a pre-synthesized powder resulted in combining synthesis with sintering ...
-
34.
Intensification of sintering of mullite-cordierite ceramics using mineralizators
-
(Science for glass and ceramic production)
-
The influence of various mineralizers on the sintering process of ceramic materials of the MgO - Al 2 O 3 - SiO 2 system has been investigated. The possibility of lowering the temperature and expanding ...
-
35.
Sintering kinetics of high-alumina ceramics with complex additive
-
(Science for ceramic production)
-
The results of studies of the kinetics of ceramics compaction during sintering under isothermal and non-isothermal heating conditions are presented. Kinetic equations of the compaction process are given ...
-
36.
Boron Nitride-Based Ceramics Obtained by Reaction-Sintering
-
(Science for ceramic production)
-
The reaction sintering of ceramics based on hexagonal boron nitride is investigated. It was found that the use of pre-sintered and then ground to a particle size of 45 - 125 ?m aluminum nitride is much ...
-
37.
EFFECT OF TECHNOLOGICAL SYNTHESIS PARAMETERS ON THE STRUCTURE, PHASE COMPOSITION, AND PROPERTIES OF POROUS Al2O3–MgO–SiO2–SiC CERAMICS
-
(Not-set)
-
Porous ceramic materials based on a coarse Al2O3 filler were synthesized using fine MgO, SiO2, and SiC binders by compaction at pressures of 20…40 MPa followed by sintering in the temperature range of ...
-
38.
INFLUENCE OF THE PURITY OF THE RAW MATERIALS SrCO3 AND TiO2 ON SOLID-STATE SYNTHESIS AND PROPERTIES OF SrTiO3 CERAMICS
-
(Not-set)
-
... purity of the reagents, single-phase strontium titanate samples were obtained at 1100 °C. SrTiO3 ceramics were obtained from synthesized powders by sintering in air at temperatures from 1400 to 1500 ° ...
-
39.
INVESTIGATION OF PHASE TRANSFORMATION ASPECTS IN THE REACTIVE SINTERING OF ZIRCONIUM DIBORIDE AND ZIRCONIUM CARBIDE
-
(Not-set)
-
Reactive sintering (siliconizing) at 1550?°C was employed to produce composite materials in the SiC–ZrB2 and SiC–ZrC systems. The influence of the initial zirconium compound on phase transformations, microstructure, ...
-
40.
INFLUENCE OF SOLID-STATE SYNTHESIS TEMPERATURE ON THE CRYSTAL STRUCTURE AND ELECTRICAL PROPERTIES OF CaCu3Ti4O12 CERAMICS
-
(Not-set)
-
Calcium-copper titanate (CaCu3Ti4O12/CСTO) is a highly demanded material for its colossal dielectric constant and temperature stability. CСTO has many applications as sensors, microwave absorbers, etc. ...