-
1.
EXPERIMENTAL STUDIES OF THE STRENGTH PROPERTIES OF HETEROGENEOUS COMPOSITIONS FOR AIRCRAFT GLAZING
-
(Not-set)
-
Due to the lack of literature data on the strength of heterogeneous laminated glass with electric heating elements, this study utilized the centrosymmetric bending method to investigate the ultimate strength ...
-
2.
SYNTHESIS OF GREEN LUMINESCENT BLUE PIGMENTS FROM PHOSPHOGYPSUM
-
(Not-set)
-
The paper investigates the possibility of obtaining green inorganic pigments with the simultaneous presence of luminescent properties during the heat treatment of chemical industry waste phosphogypsum. ...
-
3.
DECORATIVE COATINGS BASED ON ALUMINA PHOSPHATE BINDER, SPINEL-TYPE PIGMENT, AND WOLLASTONITE
-
(Not-set)
-
The study compares two types of coatings based on an alumina phosphate binder with a cobalt-containing spinel pigment: one without wollastonite and one with its addition. The coating without wollastonite ...
-
4.
STUDY OF THE INFLUENCE OF DIFFERENT TEMPORARY TECHNOLOGICAL BINDERS ON CERAMICS VK94-1
-
(Not-set)
-
This paper describes the process of obtaining VK94-1 ceramics with various TTB (temporary technological bonds) in order to assess the effect of the binder on properties such as apparent density, total ...
-
5.
TESTING POLYMER COATINGS FOR THE PURPOSES OF RESTORING AND REPAIRING CONCRETE STRUCTURES AT THE YAKUTSK CLIMATE STATION
-
(Not-set)
-
The adhesion properties of polyurethane- and polyurea-based polymer coatings designed to protect concrete were studied under the climatic conditions of Yakutia. Coated concrete samples were exposed to ...
-
6.
OBTAINING a-Fe2O3 FROM IRON-CONTAINING WASTES FOR THE PRODUCTION OF FERRITE CERAMICS
-
(Not-set)
-
The work is devoted to the production of iron oxide from industrial waste for its further use in the production of ceramics, catalysts and sorbents. It is proposed to use iron-containing waste from the ...
-
7.
POROUS STRUCTURE OF A COMPOSITE MATERIAL BASED ON CORUNDUM AND GLASS
-
(Not-set)
-
A composite material obtained by ceramic technology from electrofused corundum and finely dispersed glass is used to simulate the formation of the pore space of a porous ceramic material. According to ...
-
8.
LASER SURFACE CLEANING OF FILTERS FOR THE MANUFACTURE OF OPTICAL GLASS ELEMENTS FOR SPACECRAFT
-
(Not-set)
-
Radiation-resistant glass of the K-208 brand has been used for a long time as a protective coating for solar panels and thermoregulating coatings (TPMS) of spacecraft in the form of thin plates with a ...
-
9.
FORMATION OF OCTACALCIUM PHOSPHATE COATING ON THE SURFACE OF ?-TRICALCIUM PHOSPHATE CERAMICS
-
(Not-set)
-
The work is aimed at developing a method for forming an octacalcium phosphate (OCP, Ca8H2(PO4)6·5H2O) coating on the surface of ?-tricalcium phosphate (TCP, Ca3(PO4)2) ceramics. The coatings were formed ...
-
10.
INFLUENCE OF THE COMPOSITION OF TWO-COMPONENT BARIUM TITANATE CERAMICS ON LINEAR AND NON-LINEAR DIELECTRIC PROPERTIES
-
(Not-set)
-
The results of a study of dielectric properties and harmonic coefficient for barium titanate ceramics obtained from a mixture of BaTiO3 powders with particle sizes of 400 and 50 nm at different sintering ...
-
11.
MECHANOCHEMICAL SYNTHESIS OF CuO/ZnO/Al2O3 OXIDE COMPOSITE FOR CATALYTIC SYSTEMS
-
(Not-set)
-
The paper investigates the process of “soft” mechanochemical synthesis of the CuO/ZnO/Al2O3 composite using copper/zinc hydroxocarbonates and aluminum oxide as feedstock. Using the methods of X-ray phase ...
-
12.
GRANULAR CHEMOSORBENT BASED ON ZINC OXIDE SUPPORTED ON ?-Al2O3
-
(Not-set)
-
This article demonstrates the possibility of synthesizing a sulfur chemisorbent based on ZnO deposited on a granular ?-Al2O3 substrate by impregnation with an aqueous solution of zinc salt followed by ...
-
13.
INFLUENCE OF TECHNOLOGICAL FACTORS ON MECHANICAL STRENGTH OF PERICLASE-CARBON REFRACTORIES
-
(Not-set)
-
The paper presents the results of research on the influence of humidity, heat treatment temperature, fractional composition of periclase, time of aging before heat treatment, the amount of carbon in the ...
-
14.
PROPERTIES OF POWDERS SYNTHESIZED FROM AQUEOUS SOLUTIONS OF SODIUM SILICATE AND IRON SULFATE
-
(Not-set)
-
The phase composition of the powder synthesized from aqueous solutions of sodium silicate Na2SiO3 and iron sulfate FeSO4 at the molar ratio Fe/Si = 2 according to X-ray diffraction (XRD) data included ...
-
15.
INVESTIGATION OF THE CONDITIONS OF CERAMIC AND MECHANOCHEMICAL SYNTHESIS OF COMPOSITES CuO/ZnO/?-Al2O3
-
(Not-set)
-
In this work, using the methods of X-ray phase, X-ray diffraction, synchronous thermal analysis, scanning electron microscopy, low-temperature adsorption-desorption of nitrogen, the process of obtaining ...
-
16.
STUDY OF THE STRUCTURAL AND MECHANICAL PROPERTIES OF SAMPLES BASED ON MAGNESIUM OXIDE FORMED IN THE PROCESS OF POLYMERIZATION OF ORGANIC BINDER
-
(Not-set)
-
The article presents the results of a study of the influence of humidity, oxygen on the formation of the structure and strength properties of products based on magnesium oxide and organic binder SFPR-054. ...
-
17.
TECHNOLOGIES FOR OBTAINING FLEXIBLE THERMAL INSULATION MATERIAL
-
(Not-set)
-
The main directions of application of flexible heat insulating materials and traditional technologies for producing non-woven materials are considered. Various ways of fastening fibers are analyzed, such ...
-
18.
PRODUCTION OF GLASS FOAMS ON THE BASIS OF ROCKS
-
(Not-set)
-
The results of research on the production of granular and block foam glass materials based on widespread highly siliceous rocks and technogenic waste are presented. The main attention of researchers is ...
-
19.
ASSOCIATED SYNTHESIS OF MICROGRANULAR FOAM-GLASS CERAMICS FROM DIATOMACEOUS CLAYS
-
(Not-set)
-
The technology of synthesis of porous microgranular material based on diatomaceous clay is considered. The process of foaming microgranules in an industrial furnace was implemented in the way of obtaining ...
-
20.
THE STRUCTURE FORMATION OF CuO/ZnO/?-Al2O3 CATALYST FOR THE METHANOL SYNTHESIS PROCESS DURING MECHANOCHEMICAL SYNTHESIS
-
(Not-set)
-
The article discusses the mechanochemical synthesis of a catalyst for the synthesis of methanol. Comparative mechanical activation of both individual components of the catalyst (copper oxide, zinc oxide, ...