-
1.
DECORATIVE COATINGS BASED ON ALUMINA PHOSPHATE BINDER, SPINEL-TYPE PIGMENT, AND WOLLASTONITE
-
(Not-set)
-
The study compares two types of coatings based on an alumina phosphate binder with a cobalt-containing spinel pigment: one without wollastonite and one with its addition. The coating without wollastonite ...
-
2.
PREPARATION OF FINE MAGNESIUM ALUMINATE SPINEL POWDER BY SHS: EFFECT OF NaCl MINERALIZER ON PHASE COMPOSITION AND DISPERSITY
-
(Not-set)
-
Magnesium aluminate spinel in a submicron state was obtained for the first time directly in a combustion wave by self-propagating high-temperature synthesis (SHS) from aluminum and magnesium oxides, using ...
-
3.
ELECTRON BEAM SINTERING OF ALUMINA-BASED COMPOSITE CERAMICS WITH COPPER ADDITION IN THE FORE-VACUUM PRESSURE RANGE
-
(Not-set)
-
The effect of electron-beam sintering in the fore-vacuum pressure range (8…10 Pa) on the density, structure, and phase composition of the sintered Al2O3–Cu composite with a component mass ratio of 10:1 ...
-
4.
EFFECT OF CeO2 ON THE STRUCTURE AND PROPERTIES OF ALUMINA-ZIRCONIA CERAMICS PREPARED BY PRESSURELESS SINTERING AND HOT PRESSING
-
(Not-set)
-
The influence of ceria (CeO2: 0…3,56 wt. %) and sintering method (pressureless sintering in air, hot pressing in Ar) on the phase composition, microstructure, and properties of alumina-zirconia ceramics ...
-
5.
CERAMIC MASS BASED ON THE SYSTEM KAOLIN–ALUMINA-CONTAINING WASTE–DOLOMITE
-
(Not-set)
-
The article investigates the high-temperature interaction and sintering processes of samples of high-alumina masses of low-temperature firing for technical ceramics based on the ternary system kaolin–alumina-containing ...
-
6.
SOL-GEL SYNTHESIS AND EFFECTS OF NEODYMIUM AND EUROPIUM OXIDES ON THE STRUCTURE FORMATION OF CALCIUM MONOALUMINATE
-
(Not-set)
-
Calcium monoaluminate was synthesized using the sol-gel method and the effect of europium and neodymium oxides on the synthesis and kinetics of structure formation in the temperature range of 500 – 1000 ...
-
7.
PREDICTIVE MODELING OF THE MECHANICAL PROPERTIES OF ALPHA ALUMINA USING ARTIFICIAL NEURAL NETWORKS AND MULTIPLE LINEAR REGRESSION
-
(Not-set)
-
In the present study, we built predictive models of the mechanical properties (Young's modulus, fracture strength and toughness) of ?-Al2O3. Experiments carried out on samples produced by spark plasma ...
-
8.
Influence of High-Alumina Sludge of Alkaline Etching on Technical Parameters and Phase Composition of Acid-Resistant Materials
-
(Not-set)
-
The introduction of 40 % calcined alkali-etched sludge into the ceramic mass of nanotechnogenic high-alumina raw materials makes it possible to obtain products with high physical, mechanical and chemical ...
-
9.
Zirconia/Alumina Ceramic Composites Containing Strontium Hex-aaluminate
-
(Not-set)
-
... treatment of the initial nanopowders, the strontium hexaaluminate phase is formed in situ. A correlation has been established between an increase in the concentration of the modifier and an increase in ...
-
10.
Features of the Synthesis of Magnesium Aluminate Spinel by Sol Gel Method
-
(Not-set)
-
The results of studies of the chemical and mineralogical characteristics of alumina-containing wastes of the gas processing industry and the possibilities of their use for the synthesis of aluminum-magnesium ...
-
11.
Obtaining of High-Porous Ceramic Materials on the Basis of Alumina-Magnesia Spinel
-
(Not-set)
-
The object of research is ceramic foam materials based on aluminum oxide, magnesium oxide and aluminum-magnesia spinel. The results of research on sintering spinel ceramics using aluminum and magnesium ...
-
12.
Magnesium-Aluminate Spinel Fibers Obtained with Sol-Gel Process
-
(At the enterprises and institutes)
-
A sol-gel process for producing aluminum-magnesium spinel fibers from a fiber-forming precursor based on aluminum and magnesium polycarboxylates is considered. The principal possibility of obtaining discrete ...
-
13.
Recent studies in in high-performance alumina ceramics development (review). Part 2. Nanopowders synthesis and sintering, sol-gel technique and other methods of obtaining fine-grain and fiber alumina
-
(Science for ceramic production)
-
A review of dissertations by Russian scientists on ceramics made of aluminum oxide, methods of its preparation for the period since 2000 is presented. Thin structural ceramics are mainly considered. The ...
-
14.
Studies in high-performance alumina ceramics development (review). Part 1. Sintering with additives, reactive sintering, reinforced composites production
-
(Science for ceramic production)
-
A review of domestic dissertations on ceramics from aluminum oxide, methods of its preparation for the period since 2000 is presented. Thin structural ceramics are mainly considered. The emphasis is on ...
-
15.
Production of high-density bitstone powders for alumina-based ceramics sintering
-
(Science for ceramic production)
-
The results of theoretical and experimental studies of methods for obtaining powder fillings with a relative density of more than 0.50 for subsequent sintering of samples of high-density ceramics based ...
-
16.
Effect of molding composition and properties on alumina block substrates characteristics
-
(Science for ceramic production)
-
Ceramic block supports were obtained by extrusion molding, varying the particle size and the conditions for obtaining corundum. The structural and mechanical properties of the molding mixtures were investigated, ...
-
17.
Calcium aluminates formation features in mechanochemical inter-action in Са(ОН)2-Аl-H2O system
-
(At the enterprises and institutes)
-
... It is shown that the joint mechanical activation of the initial components in the ratio of Ca (OH) 2 : Al = 1: 2; 1: 4; 1:12 and further heat treatment at 1000 ° C leads to the formation of aluminates ...
-
18.
Methods of magnesium aluminate spinel powders synthesis for optically transparent ceramics (a review)
-
(Science for ceramic production)
-
Prospects for the use of optically transparent ceramics made of aluminum-magnesium spinel are considered. The technologies for the synthesis of spinel powders for subsequent use in the production of transparent ...
-
19.
Bioactive ceramics based on zirconia, alumina and titania
-
(Biomaterials)
-
On the basis of oxides of zirconium, titanium and aluminum, a method has been developed for producing porous ceramics biocompatible with living tissues by introducing calcium phosphates into the volume ...
-
20.
Materials science and techniques in development, production and application of wear-resistant alumina nozzles for underground soil drilling machines
-
(Science for ceramic production)
-
An analysis of the conditions and mechanisms of abrasive destruction (wear) and the principles of synthesis of structural ceramic materials is carried out from the material science standpoint. A logistic ...