-
1.
DEVELOPMENT OF NANOMODIFIED CEMENT USING MICROSILICA, POLYCARBOXYLATE AND DUNE SAND: OPTIMIZATION OF COMPOSITION AND STRENGTH CHARACTERISTICS
-
(Not-set)
-
This study presents the development and experimental validation of nanomodified cement obtained by joint grinding of clinker, gypsum, microsilica, polycarboxylate superplasticizer, and dune sand. The optimal ...
-
2.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC TILE IN THE COMPOSITION CLAY–DUNE SAND
-
(Not-set)
-
The article investigates the physical, mechanical and technological properties of ceramic plates in the composition of Kulatau clay and dune sands of the Tuprakkala massif located in the lower amudarya ...
-
3.
COMPREHENSIVE STUDY OF THE BARKHAN SANDS OF THE KUSHKUPYR DEPOSIT FOR THE PRODUCTION OF SODIUM SILICATE IN THE MICROSILICA–BARKHAN SAND–CAUSTIC SODA SYSTEM
-
(Not-set)
-
The chemical and mineralogical composition, grain structure and physicochemical properties of unenriched dune sands located in the Kushkupyr district of Uzbekistan were studied. Analysis of the granulometric ...
-
4.
Development of optimised compositions for ceramic boards production with barkhan sands
-
(Science for ceramic production)
-
The chemical and mineralogical compositions and physicochemical characteristics of the Yazyavan dune sands, as well as their suitability for use together with other raw materials of Uzbekistan to obtain ...
-
5.
CERAMIC MASS BASED ON THE SYSTEM KAOLIN–ALUMINA-CONTAINING WASTE–DOLOMITE
-
(Not-set)
-
The article investigates the high-temperature interaction and sintering processes of samples of high-alumina masses of low-temperature firing for technical ceramics based on the ternary system kaolin–alumina-containing ...
-
6.
A NEW ALTERNATIVE SOURCE OF CLAY RAW MATERIALS FOR CERAMIC MATERIALS BASED ON SILT DEPOSITS OF RESERVOIRS
-
(Not-set)
-
The possibility of obtaining a new alternative source of clay raw materials for obtaining ceramic materials based on silt deposits of reservoirs, which has functional properties, is considered. The physicochemical ...
-
7.
THE USE OF GAS CLEANING DUST OF STEELMAKING FURNACES IN THE COMPOSITION OF CERAMIC MASSES
-
(Not-set)
-
The chemical-mineralogical compositions, new formations of crystalline phases of minerals and the main properties of the ceramic mass were studied using iron-containing dust from the gas cleaning of steel-smelting ...
-
8.
SINTERING PROCESSES AND SOLID-PHASE REACTIONS IN THE TRIPLE COMPOSITION “QUARTZITE–CLAY–ADDITIVES”
-
(Not-set)
-
The article presents the results of a physicochemical study of the process of high-temperature sintering and solid-phase reactions in a ternary composition based on Koitash quartzite, Angren clay and Karakhtaisky ...
-
9.
COMPOSITION, STRUCTURE AND PROPERTIES OF LOW-TEMPERATURE FIRING PORCELAIN
-
(Not-set)
-
The article describes the mechanisms of formation of the structure of low-temperature porcelain with the use of new non-traditional raw materials. As a result of the research, it was found that the formation ...
-
10.
PHYSICO-CHEMICAL PROPERTIES OF MINERAL FIBERS OBTAINED ON THE BASIS OF ANDESIBASALTS
-
(Not-set)
-
The article presents the results of research on the development of prototypes for obtaining mineral fibers based on the andesibazalt–slag–dolomit composition and the results of testing their physicochemical ...
