-
1.
CERAMIC FILTER SYSTEMS FOR INTEGRATED PURIFICATION OF HIGH-TEMPERATURE FLUE GASES FROM GLASS-MELTING FURNACES
-
(Not-set)
-
... in the glass industry are becoming insufficient. These are only effective for capturing suspended particles yet not capable of removing the gaseous marker pollutants at the required level: NOx, SO2, CO. ...
-
2.
EXPERIMENTS ON ENRICHMENT AND SMELTING OF CERTIFICATION GLASS INGOTS FROM QUARTZ OF THE NAILYGOLD ORE DEPOSIT (SOUTH URAL)
-
(Not-set)
-
A new approach to the enrichment of natural milky-white quartz is proposed. The proposed methods of technological conversion with the smelting of certification glass ingots were tested using quartz from ...
-
3.
Of B2O3 and P2O5 Additives on Silicate and Glass Formation at Srtontium Aluminosilicate Glass Melting
-
(Not-set)
-
the results of studies on reducing the melting temperature of strontium aluminosilicate glass by introducing boron and phosphorus oxides into the charge are presented, the main physicochemical processes ...
-
4.
Physico-chemical properties of low-melting phosphate glasses in relation to tin content
-
(Science for glass production)
-
The effect of SnO on the physicochemical properties of low-melting glasses of the Li 2 O-SnO-P 2 O 5 (LSP) system intended for use in compositions for vacuum-tight low-temperature joining of various ...
-
5.
Characteristics of heat transfer through glass-melting tank walls
-
(Science for glass production)
-
A technique has been developed for the engineering calculation of the thermal resistance of the wall layer of glass, which allows, by taking into account the physical nature of the heat transfer process ...
-
6.
Lead titanate batch composition influence on thermal expansion coefficience of low-melting glass materials for corundum leak-tight low-temperature soldering
-
(At the enterprises and institutes)
-
The influence of the granulometric parameters of crystalline lead titanate on the thermal expansion coefficient of soldering glass compositions used for low-temperature vacuum-tight soldering of corundum ...
-
7.
Low-melting glass based protective coating for silicon substrates in silicon transistors production
-
(Coatings)
-
Various methods of protecting the surface of silicon substrates for the manufacture of silicon transistors have been proposed. The results of thermal operations with technological modes of obtaining a ...
-
8.
Glass formation and crystallisation in lithium-alumosilicate glasses: effect of raw materials nature on melting characteristics and crystallisation behaviour
-
(Science for glass production)
-
The influence of the type of silicon-containing raw material on silicate formation and crystallization properties of glasses of the lithium aluminum silicate system is considered and the expediency of ...
-
9.
Effect of glass batch redox potential on glass melting and properties
-
(Science for glass production)
-
An analytical review of the literature on the change in the processes of glass melting, the thermal transparency of the molten glass, the light transmission of glass, depending on the redox potential of ...
-
10.
Conditions of melting quartz glass with high purity and structural quality
-
(Science for glass production)
-
... and methods of performing known operations for purifying quartz grains are proposed. A comparison is made of the optical characteristics of quartz glasses melted by various methods of vacuum melting from ...
-
11.
The use of raw materials with predetermined characteristics: additional reserve for increasing the efficiency of glass melting furnaces and quality of the float glass production
-
(Efficiency and quality)
-
The results of the study are presented and the reasons for the instability of the high quality of float glass at a high level of equipment and technology used in the production of glass are analyzed. Based ...
-
12.
Development of the low-melting glasses composition based on bismuth-borate system
-
(Science for glass production)
-
The results of studying the properties of low-melting lead-free glasses obtained on the basis of the system ZnO - Bi 2 O 3 - B 2 O 3 with additional introduction K 2 O, Al 2 O 3 and SiO ...
-
13.
A unit for melting quartz glass in a reactive gas atmosphere and in vacuum
-
(Equipment)
-
The modernization of the "Granat-2M" growth plant for the synthesis of various quartz glasses according to the "gas - vacuum in vacuum" scheme was carried out. Its prototype is an industrial ...
-
14.
A rational approach to regulation of the redox characteristics of the batch for melting float glass
-
(Efficiency and quality)
-
Optimization of physicochemical processes in the preparation of glass batch, improvement of the processes of its preparation, transportation, feeding into the glass-making furnace and quality indicators ...
-
15.
Improvement of the process of preparing and routing of the batch in the glass melting furnace
-
(Science for glass production)
-
The analysis of the factors influencing the preservation of the stable quality of the charge when loading into the glass-making furnace after transporting it from the compound shop over a long distance ...
-
16.
Using of captured cement dust in melting of large-usage glass
-
(Science for glass production)
-
The prospect of using dust from electrostatic precipitators of cement production for melting sheet (heat-absorbing) and container glass is shown. The addition of 5 - 15% dust to the charge makes it possible ...
-
17.
An effective way of enhancing the endurance of glass melting furnaces
-
(Science for glass production)
-
The technology of high-temperature ceramic welding has been developed, intended for repairing the lining of glass-melting furnaces without stopping and cooling them. This repair method allows you to restore ...
-
18.
The use of modern home made equipment in glass melting practice
-
(Equipment)
-
The article describes the positive experience of using modern Russian equipment - magnetic separators of quartz sand of the LMO series and a specialized magnetic holder for glass molds in the production ...
-
19.
Yachevskii Optimization of physical and chemical processes upon glass batch preparation and assessment of the humidity effect on the efficiency of glass melting
-
(Science for glass production)
-
... its transportation and loading into the glass furnace. The influence of the humidification process on the quality of the charge is determined when receiving the glass charge, its transportation and loading ...
-
20.
Development of low-melting glass for decoration of facing materials
-
(Science for glass production)
-
The compositions of low-melting glasses based on the sodium borosilicate system have been developed. The effect of the composition on the thermal properties of glasses has been studied. The possibility ...
