-
1.
Strength investigation and high-temperature strength behaviour analysis for periclase-carbonaceous refractories
-
(Science for ceramic production)
-
A description of the installation for determining the ultimate strength of refractory materials in compression at elevated temperatures is considered. The values ??of the ultimate compressive strength ...
-
2.
High-temperature strength of oxide ceramic materials
-
(Science for ceramic production)
-
The results of determining the high-temperature (up to 1500 ° C) strength in compression (by the example of lightweight fibrous blocks) and bending (dense oxide ceramics) are presented. The measurements ...
-
3.
DEVELOPMENT OF HIGH-TEMPERATURE THERMAL INSULATION MATERIAL BASED ON CLAY FROM THE KORNILOVSKY DEPOSIT IN THE TOMSK REGION
-
(Not-set)
-
... been determined. The applications of the material in industry with high-temperature technologies are proposed. The work is a continuation of the article “Investigation of the properties of clays of overburden ...
-
4.
RESEARCH OF THE DEPENDENCE OF THE THERMAL STRENGTH PROPERTIES OF REFRACTORY MATERIALS OF THE LADLE LINING OF THE FERROALLOY PRODUCTION ON TEMPERATURE
-
(Not-set)
-
The article is devoted to the study of the dependence of the change in compressive strength on temperature for refractory materials of the lining of a pouring ladle of ferroalloy production – fireclay ...
-
5.
THERMAL INSULATION PROPERTIES OF CERAMOVERMICULITE AND KERAMOPERLITE MATERIALS ON A WOLLASTONITE BOND AT HIGH TEMPERATURE
-
(Not-set)
-
High-temperature thermal insulation materials are widely used in civil engineering as flame retardant materials, as well as in many industries. Rocks and industrial waste are used as raw materials for ...
-
6.
HIGH-TEMPERATURE CERAMOVERMICULITE THERMAL INSULATION ON A WOLLASTONITE BUNDLE
-
(Not-set)
-
Ceramovermiculite thermal insulation on a wollastonite bundle was obtained from chalk, diatomite and expanded vermiculite by the method of solid-phase synthesis of components. The influence of the granulometric ...
-
7.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
The effect of the concentration (from 18 to 6 %) of an alkaline activator (AA) solution on the viscosity and basic properties of geopolymer composites based on chamotte with additives of foam glass production ...
-
8.
Processes inside a Ceramic Material Based on Raw Materials with a High Fe2O3 Content in the Temperature Range 950 ; 1050 °С
-
(Not-set)
-
A ceramic brick M125 was obtained on the basis of substandard clay (loess-like loam) using overburden of pyrite copper-zinc ore at a firing temperature of 1000 ° C. At a firing temperature of a ceramic ...
-
9.
Metal/Ceramic Composite Based on Ni?Al?SiO2 System Produced by Self-Propagating High-Temperature Synthesis
-
(Coatings)
-
By the method of self-propagating high-temperature synthesis (SHS) with preliminary mechanical activation treatment (MA), a cermet material was obtained based on the Ni? Al? SiO 2 system with different ...
-
10.
Pilot Testing of Heat-Resistant Citall Coating for High-Temperature Corrosion Protection of Nichrome Alloys
-
(Coatings)
-
... The results of the economic efficiency of the application of the developed heat-resistant sitall coatings with the use of secondary raw materials during the operation of coatings at high temperatures are ...
-
11.
High-temperature stress relaxation in mullite ? ZrO2 ceramics
-
(Science for ceramic production)
-
The data obtained in the study of stress relaxation during high-temperature bending of ceramic specimens based on mullite modified with zirconium oxide are presented.
-
12.
Conditions of high-temperature СО2 laser annealing of KO-3 optical ceramics
-
(Materials processing)
-
Within the framework of a quasi-static uncoupled problem of thermoelasticity for an isotropic plate, non-destructive modes of high-temperature laser annealing of optical ceramics
KO-3 with CO2-laser radiation ...
-
13.
Parameters for high-temperature laser annealing of KO-1 and KO-5 optical ceramics with СО2-radiation
-
(Science for glass production)
-
Within the framework of a quasi-static uncoupled problem of thermoelasticity for an isotropic plate, non-destructive modes of high-temperature laser annealing of optical ceramics KO-1 and KO-5 with CO ...
-
14.
Study of high-temperature creep in polydisperse mullite - zirconia ceramics
-
(Science for ceramic production)
-
The features of the behavior at high-temperature bending of ceramic specimens based on mullite modified with zirconium oxide have been investigated. It has also been shown that recrystallization annealing ...
-
15.
Structural changes under heat treatment and high temperature deformation of composite materials based on Kul'-Yurt-Tau pyrophillites
-
(Science for ceramic production)
-
Changes in the structure during heating of composites based on pyrophyllite raw materials from the Kul-Yurt-Tau deposit with a phosphate binder have been studied. The processes associated with the interaction ...
-
16.
Ceramic coatings for gradient high temperature heat insulating materials
-
(Coatings. Enamels.)
-
Ceramic coatings based on organosilicon polymers have been investigated, and the physical, thermal and mechanical properties of coated and uncoated heat-shielding materials have been analyzed. It was found ...
-
17.
Manufacturing of nanostructural powders partially stabilized with zirconia for high-strength ceramic production
-
(Science for ceramic production)
-
It is shown that the method of precursor synthesis by spraying hot solutions highly concentrated in zirconium into concentrated ammonia solutions, in combination with mechanical treatment in optimal modes, ...
-
18.
Ceramics based on the powders of silicon nitride obtained by self-propagating high-temperature synthesis
-
(Science for ceramic production)
-
Ceramics based on silicon nitride powder obtained by self-propagating high-temperature synthesis have been investigated. Yttrium aluminum garnet and mullite were used as sintering additives. The resulting ...
-
19.
High-temperature corrosion protection of copper
-
(Enamels)
-
The optimal composition of the glass matrix for the glass enamel coating on copper has been developed. Optimal concentrations of Fe 3 O 4 , MnO 2 and Co 2 O 3 , the introduction of which, when ...
-
20.
FEATURES OF TECHNOLOGY, STRUCTURE, HARDNESS AND STRENGTH OF Al–Al2O3 CERMET WITH A HETEROGENEOUS GRANULAR-LAYERED STRUCTURE
-
(Not-set)
-
To obtain Al–Al2O3 cermet with a heterogeneous granular-layered structure, aluminum powder of the industrial grade PAP-2 with a flaky particle shape and plasma-chemical alumina powder (PCAP), consisting ...