-
1.
Author Guidelines
-
... is close to the theme of the manuscript can be brought as reviewers.
4.3. The articles are reviewed by blind method (peer review in which the reviewer does not know the name of the author, and the author ...
-
2.
Effective methods
-
(Category)
-
-
3.
EVALUATION OF THE PROPERTIES OF FUNCTIONAL-GRADIENT CERAMIC MATERIALS OBTAINED BY THE METHOD OF CO-REACTION SINTERING
-
(Not-set)
-
Monolithic samples of functionally graded ceramic materials were fabricated via reaction sintering (siliconizing) of silicon carbide and diamond powders. The resulting materials are layered composites ...
-
4.
METHODS OF SYNTHESIS OF STARTING MATERIALS FOR CERAMICS BASED ON LANTHANUM CHROMITE (REVIEW)
-
(Not-set)
-
The review article examines classical and rarely used methods for synthesizing ceramic materials based on lanthanum chromite.
-
5.
CERAMICS BASED ON POWDERS SYNTHESIZED FROM CALCIUM NITRATE AND SILICIC ACID PREPARED VIA ION EXCHANGE METHOD
-
(Not-set)
-
... with the addition of an aqueous solution of ammonia. Solutions of silicic acid prepared via the dynamic ion exchange method passing an aqueous solution of sodium silicate Na2SiO3 through a column with ...
-
6.
STUDY OF THE HOMOGENEITY OF THE CHEMICAL COMPOSITION OF LEAD-GERMANATE GLASSES BY LASER-INDUCED BREAKDOWN SPECTROSCOPY METHOD
-
(Not-set)
-
... of the melting during synthesis can also lead to local variations in composition. To address these issues, a method for chemical composition mapping based on laser-induced breakdown spectroscopy (LIBS) ...
-
7.
SINTERING OF Mg2TiO4 CERAMICS OBTAINED BY THE METHOD OF MECHANOCHEMICAL ACTIVATION OF A MIXTURE OF INITIAL POWDERS
-
(Not-set)
-
... is calculated using a non-isothermal method. The effect of increasing the firing temperature from 1300 to 1400 ?C on the density and porosity, as well as its microstructure of ceramics was studied. Ceramics ...
-
8.
DEVELOPMENT OF A LASER-INDUCED BREAKDOWN SPECTROSCOPY METHOD FOR MAPPING THE CHEMICAL COMPOSITION OF LEAD-SILICATE GLASSES
-
(Not-set)
-
The article presents the results of a study devoted to the development of a laser-induced breakdown spectroscopy (LIBS) method for monitoring the homogeneity of the chemical composition of optical glasses. ...
-
9.
THE STUDY OF CERIUM DIOXIDE POWDER OBTAINED BY REVERSE DEPOSITION METHOD
-
(Not-set)
-
The processes of powder production of CeO2 by reverse deposition are investigated. The CeO2 content in the resulting products is 99.2 % by weight. The main phase is cerium dioxide with a cubic lattice. ...
-
10.
EFFECT OF ADDING SILICON-PHOSPHORUS-ANTIMONY CATIONITE TO POTASSIUM NITRATE MELT ON STRENGTHENING SODIUM-CALCIUM-MAGNESIUM SILICATE GLASS BY ION EXCHANGE METHOD
-
(Not-set)
-
... grade B and chemically pure grade Extra pure. To determine the distribution of compressive stresses in the surface layer of glass, the waveguide spectroscopy method was used, with the help of which the ...
-
11.
FEATURES OF GARNET PHASE FORMATION IN THE Y2O3–Lu2O3–Yb2O3–Ee2O3–Al2O3 SYSTEM IN THE SYNTHESIS OF NANOCRYSTALLINE LOW-AGGLOMERATED CERAMIC POWDERS BY COPRECIPITATION METHOD USING AMMONIUM ...
-
(Not-set)
-
... were synthesized using the chemical coprecipitation method. It was determined that the process of garnet phase formation under the synthesis conditions used occurs through the formation of intermediate ...
-
12.
MAIN TYPES OF DEFECTS OF QUARTZ CERAMIC BLANKS PRODUCED BY THE SLIP CASTING METHOD FROM WATER SLIPS
-
(Not-set)
-
... properties and does not require the use of lubricants for the formation of quartz ceramic products by slip casting method allowed to reduce appearance of technological defects of ceramic blanks to 25 ...
-
13.
CERAMICS WITH ULTRAHIGH PERMITTIVITY VALUES: COMPOSITIONS, SYNTHESIS METHODS AND PROPERTIES AT LOW AND MEDIUM FREQUENCIES
-
(Not-set)
-
... time, sintering temperature, grain size. The effect of dopants and the synthesis method on the value of characteristics of capacitor ceramics that can be used in the low-frequency and high-frequency range ...
-
14.
CALCIUM ZIRCONATE: METHODS OF SYNTHESIS AND APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED THEREON – A REVIEW. PART 2. APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED ON CALCIUM ZIRCONA ...
-
(Not-set)
-
The publication presents general information about calcium zirconate and the physical/chemical characteristics of products based thereon. The main fields of application of ceramic and refractory materials ...
-
15.
SYNTHESIS OF CERAMIC POWDERS OF HAFNIUM DIBORIDE BY CARBOTHERMAL RESTORATION METHOD
-
(Not-set)
-
The processes of obtaining hafnium diboride by the carbothermic reduction of hafnium oxide by heat treatment in a vacuum furnace and a spark plasma sintering installation have been studied. When the charge ...
-
16.
CALCIUM ZIRCONATE: METHODS OF SYNTHESIS AND APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED THEREON – A REVIEW. PART 1: METHODS OF CALCIUM ZIRCONATE SYNTHESIS
-
(Not-set)
-
The publication presents general information about calcium zirconate and the physical/chemical properties of products based thereon. Methods for CaZrO3 production, such as solid-phase synthesis, electric ...
-
17.
TECHNOLOGICAL METHODS FOR INCREASING THE FLUORINE CONTENT IN THE GLASSES OF THE SrO–Al2O3–P2O5–SiO2–F SYSTEM FOR GLASS IONOMER CEMENTS
-
(Not-set)
-
The influence of the technological parameters of glass melting of the selected composition in the SrO–Al2O3–P2O5–SiO2–F system on the value of the refractive index and the amount of fluorine that remains ...
-
18.
DEVELOPMENT OF A METHOD FOR THE MANUFACTURE OF EASILY REMOVABLE CERAMIC RODS FOR CASTING BY MELTING MODELS
-
(Not-set)
-
The main industrial method for manufacturing precision metal parts with high surface finish, such as turbojet engine blades, is investment wax casting. When manufacturing a wax model, a ceramic embedded ...
-
19.
LOCAL BIREFRINGENCE ANALYSIS IN GLASS HARDENED VIA ION EXCHANGE METHOD
-
(Not-set)
-
For the first time, a local Abrio method for estimating birefringence was applied to hardened glasses, and the distribution of microstresses in float glass subjected to ion exchange hardening was studied. ...
-
20.
METHODS OF FORMING COMPLEX PROFILE PRODUCTS FROM HEAT-RESISTANT CERAMIC MATERIALS BASED ON SILICON CARBIDE
-
(Not-set)
-
The possibility of obtaining complex-shaped mechanical engineering products based on reaction-sintered silicon carbide using two methods - mechanical processing of polymerized blanks before sintering and ...
