-
1.
Comprehensive Study of Physical and Chemical Properties of Dust of Metallurgical Production in Order to Determine the Main Direc-tions of Its Processing
-
(Not-set)
-
The chemical, phase composition and properties of metallurgical dust have been studied, and its structure and particle size distribution have been determined. The physical & ndash; chemical processes occurring ...
-
2.
ABOUT THE POSSIBILITY OF USING COBALT-CONTAINING WASTE FROM METALLURGICAL PRODUCTION FOR THE PRODUCTION OF COLORED GLASSES AND GLASS ENAMEL
-
(Not-set)
-
This article depicts about the results in the study of the EP indicators of cobalt-containing waste in order to use it as a substitute for scarce expensive cobalt oxide, in the production of colored sectional ...
-
3.
Anortite-Containing Construction Ceramics Using Sludge Waste of Metallurgical Production
-
(Not-set)
-
Comprehensive studies of anorthite-containing building ceramics, obtained on the basis of clay and sludge waste from metallurgical production, have been carried out. Component compositions were selected ...
-
4.
Use of aluminous waste from nonferrous industry in ceramic clinker production
-
(Utilization of waste)
-
Compositions of ceramic masses for the production of clinker products based on unenriched kaolin and nanotechnogenic raw materials in the form of alkaline etching sludge of aluminum and its alloys of the ...
-
5.
Using waste of electrometallurgical production in developing protective composite materials
-
(Utilization of waste)
-
Optimal compositions of chemically resistant silicate composite materials (SCM) based on electrocorundum, which is a waste of the electrometallurgical production of niobium, have been proposed. The chemical ...
-
6.
CERAMIC WASTE AS AN ALTERNATIVE SOURCE OF ALUMINOSILICATE RAW MATERIALS FOR THE PRODUCTION OF PORTLAND CEMENT CLINKER
-
(Not-set)
-
Through comprehensive studies of the chemical and mineralogical composition and technological properties of the wastes of ceramic production of “Kulol” JSC in order to be able to use them as a component ...
-
7.
JOINT PROCESSING OF QUARTZ-LEUCOXENE CONCENTRATE AND BRUCITE CONTAINING WASTE FROM THE PRODUCTION OF REFRACTORY MATERIALS TO OBTAIN COMPLEX COAGULANTS
-
(Not-set)
-
... product for various industries. Hydrometallurgical processing of magnesium titanate made it possible to obtain a complex magnesium-titanium-containing coagulant, which showed extremely high efficiency ...
-
8.
THE USE OF GAS CLEANING DUST OF STEELMAKING FURNACES IN THE COMPOSITION OF CERAMIC MASSES
-
(Not-set)
-
The chemical-mineralogical compositions, new formations of crystalline phases of minerals and the main properties of the ceramic mass were studied using iron-containing dust from the gas cleaning of steel-smelting ...
-
9.
Plasma Technology for the Production of Glass
Pellets Based on Waste from the Enrichment of Ferruginous Quartzite KMA
-
(Not-set)
-
A technology has been developed for producing glass microspheres in a plasma reactor based on the wastes of enrichment of ferruginous quartzites KMA. The regularities of the influence of the flow rate ...
-
10.
Fly Ash as a Technogenic Raw Material for the Production of Re-fractory and Insulating Ceramic Materials (Review)
-
(Not-set)
-
A review of the literature on the production of fly ash at thermal power plants and the level of its processing in Russia and abroad is presented. The properties of fly ash and its fields of application ...
-
11.
Bulk Processing of Industrial Waste into Foam Glass Materials
-
(Not-set)
-
An overview of research in the field of utilization of large-scale industrial waste in the production of granular and block foam materials is presented. The possibilities and prospects of obtaining materials ...
-
12.
New construction materials with enhanced strength based on met-als industrial waste
-
(Utilization of waste)
-
Non-firing and firing high-silica composite materials for construction purposes based on quartz sand and blast-furnace slag, which are characterized by increased strength and durability, high density, ...
-
13.
Determination of the filtration efficiency of ceramic foam filters based on raw materials and industrial waste in Uzbekistan [30-32]
-
(Utilization of waste)
-
... of 30 ppi effectively purify the melt from exogenous non-metallic inclusions and fully correspond to the level of industrial filters of similar porosity. Filtration efficiency depends on the type and size ...
-
14.
Tyumen clays in constriction ceramics production
-
(Science for ceramic production)
-
The properties of three samples of low-melting clays (Tyumen region) were investigated for use in the production of ceramic building bricks. Found that clay samples? 1 and 3 can be used for the production ...
-
15.
Using of raw materials from the region of Kursk magnetic abnormity in medical container production
-
(Raw materials)
-
The possibility of using natural and technogenic raw materials of KMA - quartzite sandstones - for the introduction of silicon oxide in the production of medical containers, as well as dust from electrostatic ...
-
16.
STUDY OF CHARACTERISTICS OF ADHESIVE PERMANENT JOINTS IN REACTION-SINTERED CERAMIC MATERIALS BASED ON SILICON CARBIDE
-
(Not-set)
-
Laboratory samples of reaction-sintered silicon carbide ceramics with permanent adhesive joints were obtained based on isopropyl alcohol and phenol-formaldehyde resin solutions with different contents ...
-
17.
GRINDING OF BIOGENIC SILICA
-
(Not-set)
-
The temperature regimes of the thermal extraction method for obtaining silicon dioxide from rice husk and various conditions of subsequent milling were investigated. Elemental, X-ray phase, petrographic ...
-
18.
The Phase Composition and Physico-Mechanical Properties at Different Temperatures of Ceramic Firing Earthquake-Resistant Bricks Using Ferroli
-
(Not-set)
-
Ceramic bricks based on low-melting clay and ferro-dust were obtained from self-decaying slags of low-carbon ferrochrome in the temperature range 950 - 1100 ° C, which have grades from M100 to M175, respectively. ...
-
19.
Synthesis and Properties of Porous Glass Composite Modified by Silicon Carbide
-
(Not-set)
-
The synthesis and properties of a porous glass composite obtained on the basis of cullet powder at temperatures not exceeding 100 ° C using aluminum powder and liquid glass are considered. It is shown ...
-
20.
Effect of Municipal Solid Waste Incineration Fly Ash on Properties, Durability and Environmental Toxicity of Fired Aluminosilicate
-
(Utilization of waste)
-
Investigations of the effect of fly ash generated from the incineration of municipal solid waste on the properties, durability and environmental toxicity of fired luminosilicates are presented. In the ...
