-
1.
Publishing Ethics
-
... guidelines correspond to the editorial policy of the journal.
Editors of Journal do all in their power to adhere to the ethical standards established by the international scientific community and to prevent ...
-
2.
Expediant use of fuel-power resources
-
(Category)
-
-
3.
Foam Glass and Foam Materials Based on the Ash and Slag Waste of Thermal Power Plants (Review)
-
(Utilization of waste)
-
An overview of domestic and foreign studies on the use of ash and slag waste from thermal power plants as raw materials in the production of foam glasses and glass-crystalline foams is presented. It is ...
-
4.
Cell heat-insulating construction glassmaterials made with steam power stations and iron industry waste
-
(Utilization of waste)
-
The physicochemical processes of the formation of the cellular structure of heat-insulating building glass materials as a result of thermoplastic sintering of the charge at a temperature of 600? 870? C. ...
-
5.
Influence of vollastonite on porous structure in ceramic tiles made from non-ferrous metallurgy and power industry waste
-
(Utilization of waste)
-
Analysis of experimental data obtained by diffuse small-angle X-ray scattering (SMX) shows that wollastonite in ceramic facing tiles, although it increases the total number of pores in size in the range ...
-
6.
Production of catalytic metalloceramic membranes for small-scale power plants by means of combustion
-
(Science for ceramic production)
-
... (95% Ni ? 5% Al) + Co3O4. As a result, porous cermet membranes were obtained containing 10 ? Ni and Co nanoparticles in the surface pore layers. 20 nm. A prototype prototype of a power plant with high ...
-
7.
Glassenamels firing with concentrated solar power
-
(At the enterprises and institutes)
-
The possibilities of using concentrated solar energy to create a light-emitting technology for producing art items with glass enamel are considered. Calculations have been carried out to select the optimal ...
-
8.
Estimation of competitive power for wall materials with glassy protective and decorative coatings made by plasma vitrification
-
(Efficiency and quality)
-
For the first time, the results of studies on the development of a scale of desirability for assessing the competitiveness of wall building materials with glassy protective and decorative coatings are ...
-
9.
Prospects of increasing power and ecological effectiveness of ceramic production
-
(Science for ceramic production)
-
Prospects for the use of reference materials on the best available technologies produced by the sectoral technical working groups of the European Bureau for Integrated Pollution Prevention and Control ...
-
10.
Glass synthesis for slag glass-ceramic production using slag of thermal power plants
-
(Utilization of waste)
-
Compositions of glasses have been developed, which make it possible to obtain slag-silicates based on ash-and-slag waste from thermal power plants. The crystallization ability has been studied for the ...
-
11.
Special features of glass heating using multipoint power source
-
(Science for glass production)
-
On the basis of the principle of superposition of wave addition, a mathematical model of the power distribution on the surface of a glass plate when it is heated with the help of tubular heaters is proposed. ...
-
12.
Durable power-effective glass-coatings for gas-liquid and energy-carrier pipelines
-
(Coatings. Enamels.)
-
Comparative characteristics of known materials used to increase the durability of steel pipes are given. The efficiency of using glass enamel coatings for corrosion protection is shown. The physical and ...
-
13.
Coloring power of ceramic with glauconite admixtures
-
(Science for ceramic production)
-
The possibility of using glauconite additives in the production of ceramics and their influence on the intensity of coloring of ceramics have been studied. It is shown that the effect of glauconite additives ...
-
14.
Contact-free three-phase linear voltage stabilizer for three-wire power network
-
(Energy saving)
-
The principles of constructing resource- and energy-saving power supply systems based on transformer-thyristor modules are considered on the example of a developed non-contact three-phase linear voltage ...
-
15.
Using of wastes of chemical water cleaning of electric power plants and mines in ceramic production
-
(Utilization of waste)
-
The possibility of using waste generated as a result of chemical treatment of wastewater from power plants and mines in the ceramic industry has been determined. The main physical properties of the materials ...
-
16.
Ash and slag of thermal power stations: an important mineral raw for silicate industry
-
(Raw materials. Utilization of waste.)
-
The problems associated with the accumulation of ash and slag waste from thermal power plants in Russia and abroad are considered. An analysis of the chemical and qualitative compositions of ash and slags ...
-
17.
Production of ceramic pigments following power saving technology
-
(Science for ceramic production)
-
An original pilot plant for filters made of porous metals has been developed and implemented at the plant. The diagram and description of the installation, the principle of its operation are given. Practical ...
-
18.
INFLUENCE OF THE PERCOLATION THRESHOLD ON MICROSTRUCTURAL PROPERTIES OF THIN-FILM INDIUM-TIN OXIDE DURING THERMAL ANNEALING
-
(Not-set)
-
This article presents a comprehensive study of thin-film coatings based on indium tin oxide. The percolation threshold is established at ?6.8 nm, above which a continuous electrically conductive film is ...
-
19.
INORGANIC GLASS SCINTILLATORS: COMPOSITIONS AND PROPERTIES
-
(Not-set)
-
Inorganic glass scintillators are an important class of materials for detecting ionizing radiation in medicine, nuclear power, high-energy physics, and security systems. Despite their lower light yield ...
-
20.
NANOSTRUCTURAL FEATURES OF HIGH-PRESSURE IMPACT-ORIGINATED MELT GLASS STUDIED BY SMALL-ANGLE SYNCHROTRON X-RAY SCATTERING
-
(Not-set)
-
Impact glasses are naturally occurring amorphous materials formed by high-velocity meteorite impacts on the Earth's surface. This paper examines the structural features of a high-pressure variety of impact ...
