-
1.
FEATURES OF TECHNOLOGY, STRUCTURE, HARDNESS AND STRENGTH OF Al–Al2O3 CERMET WITH A HETEROGENEOUS GRANULAR-LAYERED STRUCTURE
-
(Not-set)
-
To obtain Al–Al2O3 cermet with a heterogeneous granular-layered structure, aluminum powder of the industrial grade PAP-2 with a flaky particle shape and plasma-chemical alumina powder (PCAP), consisting ...
-
2.
INFLUENCE OF CONDITIONS AND MODES OF MIXTURE PREPARATION ON THE STRUCTURE AND STRENGTH OF SULFUR CONCRETE
-
(Not-set)
-
One of the main disadvantages of sulfur concrete is the formation of a crack defect when cooled in metal molds. The proposed way of using sequential addition of components, temperature control at the entire ...
-
3.
INFLUENCE OF SOLID-STATE SYNTHESIS TEMPERATURE ON THE CRYSTAL STRUCTURE AND ELECTRICAL PROPERTIES OF CaCu3Ti4O12 CERAMICS
-
(Not-set)
-
Calcium-copper titanate (CaCu3Ti4O12/CСTO) is a highly demanded material for its colossal dielectric constant and temperature stability. CСTO has many applications as sensors, microwave absorbers, etc. ...
-
4.
INFLUENCE OF THE RARE-EARTH FLUORIDES ADDITIVE ON THE STRUCTURE AND PROPERTIES OF THE BOROPHOSPHATE GLASSES
-
(Not-set)
-
In this work, we investigated borophosphate glasses with additions of 0.5 to 1.5 mol. % of rare-earth fluorides LnF3 (Ln = La, Ce, Nd), considered as simulants of radioactive waste from the now developing ...
-
5.
INVESTIGATION OF THE EFFECT OF MECHANOACTIVATION OF LOCAL RAW MATERIALS ON THE STRENGTH PROPERTIES OF SULFURE CONCRETE
-
(Not-set)
-
Technological solutions have been developed to produce composite sulfur-containing building materials based on local mineral raw materials with a high level of technical properties for use in the climatic ...
-
6.
DETERMINATION OF TRIBOLOGICAL CHARACTERISTICS OF REACTION-SINTERED SILICON CARBIDE IN A FRICTION PAIR WITH TITANIUM ALLOY VT6
-
(Not-set)
-
Ceramic materials based on silicon carbide were synthesized using reaction sintering with the introduction of a reactive component – technical carbon black – into the starting mixture at varying concentrations ...
-
7.
PHYSICAL AND MECHANICAL PROPERTIES OF Al-Al2O3 CERMET WITH A HETEROGENEOUS GRANULE-LAYERED STRUCTURE PRODUCED USING MECHANICAL ALLOYING AND VACUUM SINTERING
-
(Not-set)
-
To produce Al–Al2O3 cermet with a heterogeneous granular-layered structure, mixing of flake aluminum powder of the PAP-2 brand with the plasma-chemical alumina powder (PCAP) consisting of nano-thick lamellar ...
-
8.
THE PROCESS OF FORMATION OF CRYSTALLINE PHASES IN HEAT-RESISTANT CORDIERITE-CONTAINING ELECTRICAL MATERIALS
-
(Not-set)
-
The article presents the results of studies of heat-resistant insulating ceramics, as well as a mechanism of cordierite phase formation during single firing of compositions containing polymineral clay ...
-
9.
POROUS STRUCTURE OF A COMPOSITE MATERIAL BASED ON CORUNDUM AND GLASS
-
(Not-set)
-
A composite material obtained by ceramic technology from electrofused corundum and finely dispersed glass is used to simulate the formation of the pore space of a porous ceramic material. According to ...
-
10.
ON HIGH-TECH APPLICATIONS OF ZIRCONIUM DIOXIDE, PARTIALLY STABILIZED WITH YTTRIUM OXIDE (REVIEW)
-
(Not-set)
-
An overview of the applications of zirconium dioxide, partially stabilized with yttrium oxide, in various high-tech fields is presented. Particular attention is paid to its use in supercapacitors, where ...
-
11.
EXPERIMENTAL DETERMINATION OF THE SPECIFIC ENERGY OF DESTRUCTION OF SILICON CARBIDE-BASED CERAMICS UNDER THE INFLUENCE OF MILLISECOND LASER RADIATION
-
(Not-set)
-
Experimental studies of the effect of laser radiation with a wavelength of 1.06 ?m on reaction-sintered silicon carbide-based ceramics in the range of power densities corresponding to the mode of advanced ...
-
12.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC COMPOSITE MATERIAL BASED ON Al6Si2O13–ZrSiO4
-
(Not-set)
-
Composite ceramic materials based on SiO2–Al2O3–ZrO2 nanopowders were obtained by sintering and their properties were studied. Before sintering, the powders were subjected to mechanical activation in a ...
-
13.
DEFECTS AND MICROIMPURITY IN GLASS FROM NATURAL MILK-WHITE QUARTZ FROM DEPOSITS OF THE SOUTH URALS
-
(Not-set)
-
The paper shows micro-impurities and defects occurring in glass welded by two-stage method from natural quartz mined in the Urals. It is established that the quality of glass depends on the presence and ...
-
14.
EXPERIMENTS ON ENRICHMENT AND SMELTING OF CERTIFICATION GLASS INGOTS FROM QUARTZ OF THE NAILYGOLD ORE DEPOSIT (SOUTH URAL)
-
(Not-set)
-
A new approach to the enrichment of natural milky-white quartz is proposed. The proposed methods of technological conversion with the smelting of certification glass ingots were tested using quartz from ...
-
15.
ASSESSMENT OF THE EFFECT OF LITHIUM CHLORIDE ON THE PROPERTIES OF BOROPHOSPHATE GLASS DURING THE IMMOBILIZATION OF RADIOACTIVE WASTE FROM PYROCHEMICAL PROCESSING OF SPENT NUCLEAR ...
-
(Not-set)
-
The paper presents the results of the studies of a matrix based on borophosphate glass (BFS) with the addition of lithium chloride as a simulator of spent electrolyte, a type of radioactive waste formed ...
-
16.
ENGINEERING OF THE AUTOMATED CONTROL SYSTEM OF THE GLASS FORMING MACHINE TECHNOLOGICAL PROCESS AS A TOOL FOR FORMING THE SECTORAL TECHNOLOGICAL SOVEREIGNTY
-
(Not-set)
-
A methodological approach to developing hardware and software solutions for debugging and testing algorithms and control systems for actuators of a glass-forming machine in real time is presented. During ...
-
17.
ENERGY- AND RESOURCE-SAVING PLASMA TECHNOLOGY FOR GLAZING OF AUTOCLAVE-HARDENED BUILDING MATERIALS
-
(Not-set)
-
An energy- and resource-saving plasma technology for glazing autoclaved building materials has been developed. It has been established that the introduction of colemanite into the initial charge makes ...
-
18.
SYNTHESIS OF TITANIUM OXIDE POWDERS FROM VARIOUS TITANIUM SALTS AND STUDY OF ITS PROPERTIES
-
(Not-set)
-
In this work, a number of titanium oxide powders with different crystal structures and textural characteristics were synthesized. The initial raw materials were metallic titanium and rutile (rutile particle ...
-
19.
STRUCTURE AND OPTICAL PROPERTIES OF SOLID SOLUTIONS OF THE ZrO2–Sc2O3 SYSTEM OBTAINED BY CO-PRECIPITATION
-
(Not-set)
-
The structure of ZrO2–Sc2O3 powders in the composition range from 1 to 15 mol. % Sc2O3 with the addition of 0.1 mol. % Eu2O3 as a spectroscopic probe, obtained by the coprecipitation method and heat-treated ...
-
20.
GLASS-LIKE CARBON FROM SUPERCRITICAL FLUID IN THE C–O–H SYSTEM AT TEMPERATURE 800 ?C AND PRESSURE 500…1000 ATM
-
(Not-set)
-
The paper presents the results of experimental modeling of glass-like carbon synthesis from high pressure supercritical fluid in the C–O–H system at temperature 800 °C and pressure 500…1000 atm. A full ...
