-
1.
The Memory of the Scientist V. S. Bakunov
-
(Information)
-
... Bakunov has passed away. Valery Sergeevich is a graduate of the Moscow Institute of Chemical Technology named after DI Mendeleev, from which he successfully graduated in 1960 with a degree in chemist ...
-
2.
INVESTIGATION OF LUMINESCENT PROPERTIES OF OPTICAL CERAMICS BASED ON YAG AND LuAG CO-ACTIVATED Yb3+ AND Er3+
-
(Not-set)
-
For the first time, optical ceramics based on LuAG were obtained, simultaneously doped with Yb3+ and Er3+ ions. The optical, spectral-luminescent and kinetic characteristics of ceramics Y2,82Yb0,15Er0,03Al5O12 ...
-
3.
CHARACTERISTICS AND MORPHOLOGY OF THE PORE SPACE OF SYNTHETIZED HIGHLY POROUS Sc2O3 CERAMIC MATERIALS
-
(Not-set)
-
An energy-efficient synthesis of highly porous ceramic materials based on Sc2O3 was carried out using a combination of compaction and technological combustion methods with the participation of active binders. ...
-
4.
INFLUENCE OF YAG CERAMIC POWDERS GRINDING CONDITIONS OF ON THE PROPERTIES OF OPTICAL CERAMICS
-
(Not-set)
-
In this study, the changes in the morphology and degree of agglomeration of both precursor powders and ceramic YAG powders under varying grinding conditions was considered. The effect of these parameters ...
-
5.
THE COMBINED EFFECT OF SINTERING ADDITIVES MgO AND TEOS ON THE STRUCTURE AND OPTICAL PROPERTIES OF CERAMICS YAG:Yb, Er
-
(Not-set)
-
In this work, the effect of sintering additives based on magnesium oxide (MgO) and silicon oxide (TEOS) in concentrations from 0.02 to 0.10 wt. % and 0.2 to 0.5 wt. %, respectively, was investigated on ...
-
6.
Influence of Slip Evacuation on Properties of Large-Size Products from Quartz Ceramics
-
(Not-set)
-
It is shown for the first time that the slurry evacuation method can be used within the technology of manufacturing large-size radio-technical items from quartz ceramics. According to the results of the ...
-
7.
Zirconia/Alumina Ceramic Composites Containing Strontium Hex-aaluminate
-
(Not-set)
-
The preparation and mechanical properties of composites 20 & # 37; molar fraction of Al 2 O 3 and 80 & # 37; [3Yb & # 8211; TZP] modified with strontium oxide. It is shown that in the process of heat ...
-
8.
Pulsed Laser Punching of Holes in Ceramic Parts
-
(Not-set)
-
Within the framework of the theory of developed evaporation of matter under the action of laser radiation, the problem of assessing the strength of ceramic parts of a cylindrical shape during laser punching ...
-
9.
Chemical Transformations as a Tool for Managing the Properties of Calcium Carbonate Powder
-
(Not-set)
-
Powder of calcium carbonate CaCO 3 (calcite) with a particle size of 100-200 nm and a shape close to isometric was obtained by heat treatment at 600 ° C of a product synthesized from a 2M aqueous solution ...
-
10.
Ceramic Material Composite on the Basis of Silicon Carbide with Eutectic Additives
-
(Science for ceramic production)
-
Composite ceramics of granular silicon carbide, precipitation hardened by eutectic additives of the Al 2 O 3 -MnO-TiO 2 system, have been obtained. The effect of a dispersed eutectic powder in the ...
-
11.
Studies in high-performance alumina ceramics development (review). Part 1. Sintering with additives, reactive sintering, reinforced composites production
-
(Science for ceramic production)
-
A review of domestic dissertations on ceramics from aluminum oxide, methods of its preparation for the period since 2000 is presented. Thin structural ceramics are mainly considered. The emphasis is on ...
-
12.
Comparative analysis of plasma-sprayed bioceramic coatings based on zinc-doped hydroxyapatite and tricalcium phosphate
-
(Biomaterials)
-
The results of X-ray diffraction and infrared analyzes of powders of zinc-substituted hydroxyapatite and tricalcium phosphate are presented, and the technology of plasma spraying of coatings based on them ...
-
13.
Phase composition of calcium phosphate ceramics made from nanopowders with Ca/P ratio of 1,25 obtained by mechanoactivation
-
(Biomaterials)
-
The processes occurring at the stages of mechanical activation of powders and firing of samples pressed from calcium phosphate nanopowders with a molar ratio of Ca / P = 1.25 have been studied. Washing ...
-
14.
Disperse hardening of aluminum oxide composite system and tetragonal zirconia stabilized with cerium cations
-
(Science for ceramic production)
-
The preparation of composites based on nanopowders synthesized by the sol-gel method in the system of aluminum oxide and tetragonal zirconium dioxide stabilized by cerium cations (Al 2 O 3 - [Ce-TZP]) ...
-
15.
Landmarks in cooperation between D. Mendeleyev University de-partment of ceramics and refractories and Glass and Ceramics
-
(Jubilee)
-
The research results of the Russian Chemical Technical University named after V.I. DI Mendeleev in the field of obtaining modern ceramic materials with high performance properties. The technological features ...
-
16.
Basalt fibers produced in solar furnace
-
(Science for glass production)
-
The possibility of obtaining basalt fiber based on mineral raw materials of Uzbekistan using heating with concentrated solar radiation has been investigated. The phase composition and properties of basalt ...
-
17.
Structure formation in a porous high-refractory granular ceramic material
-
(Science for ceramic production)
-
On the basis of model and experimental studies, the formation of the structure of a porous highly refractory ceramic material with a granular structure has been studied. The concept of the structure of ...
-
18.
Monophase high-purity dense ceramics production from high-sintering complex oxides
-
(Science for ceramic production)
-
... // Glass and ceramics. 2003.? 9, p. 21? 27.
Belyakov AV Synergetic and Quasichemical Approaches in Ceramic Technology (A Review) // Glass and Ceram. 2003. V. 60. N 9? 10.P. 274? 279.
Belyakov A. V., Bakunov ...
-
19.
Destruction duration and deformation for dense polycrystalline oxide ceramics up to 1600 °С
-
(Science for ceramic production)
-
The indicators of long-term strength (time and deformation to failure) of dense-sintered oxide ceramics in the temperature range 1400 - 1600 ° C at loads up to 60 MPa have been determined. There is a relationship ...
-
20.
Continuous strength of dense polycrystalline magnesia ceramics up to 1600 °С
-
(Science for ceramic production)
-
Experimental data on determining the long-term strength (time and deformation to fracture) of half-sintered periclase ceramics at temperatures up to 1600 ° C at loads of 20 - 50 MPa are presented. It is ...
