-
61.
A PRACTICE-ORIENTED METHOD FOR ESTIMATING THE SPECIFIC ENERGY OF DESTRUCTION OF CERAMIC COMPOSITIONS OF THE ABRASIVE GRAIN–CERAMIC BINDER–PORES SYSTEM
-
(Not-set)
-
The article is devoted to the development of an original production method for estimating the specific energy of destruction of ceramic compositions of the “abrasive grain–ceramic binder–pores” system. ...
-
62.
MIDDLE RANGE ORDER IN GLASSES OF La2O3–Nb2O5–B2O3 AND BaO–Nb2O5–P2O5 SYSTEMS ACCORDING TO X-RAY TOTAL SCATTERING
-
(Not-set)
-
... systems. The RDF demonstrate separate peaks at distances below ~1 nm which points on the middle range ordering in the considered glasses. The consideration of RDF for BaO–Nb2O5–P2O5 glasses system with ...
-
63.
FEATURES IN MICROSTRUCTURE AND THERMOELECTRIC PROPERTIES OF TWO-PHASED CERAMIC MATERIAL BASED ON HIGH-ENTROPY Bi–Sb–Te–Se–S SYSTEMS
-
(Not-set)
-
The aim of present work is to prepare by using the method of reactive spark plasma sintering, a ceramic material based on the high-entropy Bi–Sb-Te–Se–S system, the nominal composition of which corresponds ...
-
64.
PHASE TRANSFORMATIONS UNDER THE ACTION OF FEMTOSECOND PULSES IN THE GLASS-CERAMIC OF ZnO–MgO–Al2O3–SiO2 SYSTEM
-
(Not-set)
-
The effect of femtosecond laser micro-treatment in thermal and non-thermal modes on the structure of transparent glass-ceramic based on the ZnO–MgO–Al2O3–SiO2 system, characterized by increased mechanical ...
-
65.
GURLEN HYDROSLUIDIC CLAY IS A LOW-TEMPERATURE FLUX IN THE PRODUCTION OF CERAMICS
-
(Not-set)
-
As a result of a comprehensive study of the characteristics of the clay of the Gurlensky deposit, it was determined that the Gurlensky hydrosluidic clay, in its chemical composition, has a relatively high ...
-
66.
GLASSY FUNCTIONAL FILLERS OF GLASS IONOMER CEMENTS IN THE SrO–Al2O3–P2O5–SiO2–F SYSTEM
-
(Not-set)
-
Based on glass in the SrO–Al2O3–P2O5–SiO2–F system, functional glass fillers for glass ionomer cements containing up to 13 wt. % fluorine were obtained. The high level of radiopacity of the filling material ...
-
67.
GLASS FILLERS BASED ON THE SrO–Al2O3–B2O3–SiO2 SYSTEM FOR DENTAL COMPOSITES
-
(Not-set)
-
Dental composite ?lling materials based on glass in the SrO–Al2O3–B2O3–SiO2 system was obtained. The glass filler meets the modern level of requirements for filling materials, and is characterized by high ...
-
68.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
... waste, multi-walled carbon nanotubes (MWCNT) and air-entraining additive (AEA) after heat treatment at different temperatures. In specimens with АЕА, the density decreases from 1600 to 1240 kg/m3, strength ...
-
69.
DIELECTRIC PROPERTIES OF CERAMICS BASED ON BN–ZrB2 AND BN–ZrO2 PRODUCED BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS
-
(Not-set)
-
Dielectric properties of ceramic materials based on BN–ZrB2 and BN–ZrO2 systems synthesized in the mode of self-propagating high-temperature synthesis (SHS) from a mixture of boron B powders, boron nitride ...
-
70.
PROTECTIVE TECHNOLOGICAL COATING BASED ON ZrO2–BaO–B2O3–SiO2 SYSTEM FOR PROTECTION OF HEAT-RESISTANT NICKEL ALLOY WITH SINGLE-CRYSTAL STRUCTURE DURING HEAT TREATMENT
-
(Not-set)
-
The purpose of this work was developing of protective technological coating for protection of heat-resistant nickel alloy with single-crystal structure ZHS30 during high-temperature homogenization. Based ...
-
71.
INFLUENCE OF CARBON NANOSUBSTRUCTURES ON THE PHYSICAL AND EXPLOITATION PROPERTIES IN STRUCTURAL CERAMICS IN THE Al2O3–ZrO2 SYSTEM
-
(Not-set)
-
The influence of the concentration of decorated carbon nanotubes and the influence of the concentration of eutectic additives, as well as the effect of the firing regime on the strength characteristics ...
-
72.
FEATURES OF CRYSTALLIZATION OF LITHIUM-ALUMINOSILICATE GLASS MICROSPHERES OBTAINED IN A HIGH-TEMPERATURE PLASMA FLOW
-
(Not-set)
-
The influence of the spheroidization process in the flow of high-temperature plasma of glass based on the Li2O–Al2O3–SiO2 (LAS) system doped with 1.0 mol. % Nd2O3 on its crystallization properties is investigated. ...
-
73.
IMPROVING THE QUALITY OF SAFE TEMPERED GLASS IN THE PRODUCTION PROCESS
-
(Not-set)
-
Selective control of the tempered glasses produced was carried out. Deviations of bent products from a given shape are revealed. Linear adaptive models describing the dependence of the shape of products ...
