-
1.
FABRICATION, MICROSTRUCTURE AND PROPERTIES OF COMPOSITE OPTICAL CERAMICS YSAG:Nd3+/YSAG:Sm3+
-
(Not-set)
-
... composition have been studied. Three types of samples were produced from the obtained ceramic powders using various pressing methods: standard non-composite reference samples, samples with a composite ...
-
2.
FEATURES IN MICROSTRUCTURE AND THERMOELECTRIC PROPERTIES OF TWO-PHASED CERAMIC MATERIAL BASED ON HIGH-ENTROPY Bi–Sb–Te–Se–S SYSTEMS
-
(Not-set)
-
The aim of present work is to prepare by using the method of reactive spark plasma sintering, a ceramic material based on the high-entropy Bi–Sb-Te–Se–S system, the nominal composition of which corresponds ...
-
3.
STUDY OF THE MICROSTRUCTURE AND PHASE FORMATION IN CERAMICS BASED ON Zn, Sn AND Ti OXIDES
-
(Not-set)
-
Ceramics was obtained from the mixture of ZnO, SnO2 and TiO2 nanopowders by the method of solid-state sintering at 1123 K and 1443 K. The indicated nanopowders are used as components in arc dampers and ...
-
4.
Research of Microstructure of Ancient Issyk-Kul Ceramics by the Method of Raster Electron Microscopy
-
(Not-set)
-
Microstructural studies of ancient Issyk-Kul ceramics were carried out using a scanning electron microscope, which allows not only to see the mutual arrangement of mineral particles, pores and microcracks, ...
-
5.
Alkox technology of nano-, microstructured sols for ceramic materials
-
(At the enterprises and institutes)
-
A method is proposed for the synthesis of a sol with a controlled particle size by influencing the parameters of the hydrolytic polycondensation process. The possibilities of sol synthesis by changing ...
-
6.
The influence of synthesis conditions on microstructure and properties of composite ceramic material made from nanosized Ce0.1Al0.1Zr0.8O2 powder
-
(Science for ceramic production)
-
A comparative analysis of the features of the microstructure and mechanical properties of composite ceramic materials obtained from a nanosized powder of the composition Ce 0.1 Al 0.1 Zr 0.8 O 2 ...
-
7.
Effect of kolemanite additives on the properties, microstructure and sintering of heat-resistant spodumene ceramics
-
(Science for ceramic production)
-
The influence of colemanite additives on sintering, properties and microstructure of spodumene ceramics has been investigated. It has been established that the introduction of colemanite in an amount of ...
-
8.
Formation of the microstructure of ceramic masses based on flotation tailings of W-Mo ores
-
(Utilization of waste)
-
The results of studying the phase compositions and the formation of the microstructure of sintered ceramic specimens based on the kaolin - chamotte - KVMR composition in order to obtain a ceramic material ...
-
9.
The effect of metal oxides on the microstructure of zinc ceramics
-
(At the enterprises and institutes)
-
The effect of ZnO crystallization on the current-voltage characteristics has been investigated. It was shown that the introduction of Bi 2 O 3 , TiO 2 , SnO 2 promotes crystal growth, while Sb 2 ...
-
10.
The effect of additives of transition metal oxides on the strength, phase composition and microstructure of cordierite ceramics
-
(Science for ceramic production)
-
The effect of additives of transition metal oxides and sintering temperature on the strength characteristics of ceramics from cordierite synthesized with the use of mechanical activation has been investigated. ...
-
11.
ELECTRON BEAM SINTERING OF ALUMINA-BASED COMPOSITE CERAMICS WITH COPPER ADDITION IN THE FORE-VACUUM PRESSURE RANGE
-
(Not-set)
-
The effect of electron-beam sintering in the fore-vacuum pressure range (8…10 Pa) on the density, structure, and phase composition of the sintered Al2O3–Cu composite with a component mass ratio of 10:1 ...
-
12.
FINISHING OF THE SURFACE OF CORUNDUM CERAMICS WITH AN ARGON CLUSTER-ION BEAM
-
(Not-set)
-
The effectiveness of an argon ion cluster beam for polishing the surface of corundum ceramics was investigated. Using atomic force microscopy, changes in the surface relief of VK-100 ceramics were studied ...
-
13.
CERAMICS BASED ON POWDERS SYNTHESIZED FROM CALCIUM NITRATE AND SILICIC ACID PREPARED VIA ION EXCHANGE METHOD
-
(Not-set)
-
Ceramics in the CaO–SiO2 and Na2O–CaO–SiO2 systems were obtained from powders synthesized from aqueous solutions of silicic acid and calcium nitrate at a molar ratio of Ca/Si = 0.5 by direct precipitation ...
-
14.
DIELECTRIC PROPERTIES OF MANGANESE-DOPED ZINC TITANATE (MnxZn1-xTiO3, x = 0.1; 0.3, & 0.5) CERAMICS FOR HIGH K-MICROWAVE APPLICATIONS
-
(Not-set)
-
The microstructure and dielectric properties of manganese-doped zinc titanate (MnxZn1–xTiO3) ceramic samples were investigated as a function of manganese concentration (x = 0.1; 0.3, & 0.5). XRD analysis ...
-
15.
ELECTRICAL PROPERTIES OF OXIDE CERAMICS WITH PYROCHLORE STRUCTURE CONTAINING MANGANESE AND NICKEL
-
(Not-set)
-
... electron microscopy data, the ceramics is characterized by a porous microstructure formed by randomly oriented grains of an elongated shape. The average crystallite size determined by X-ray diffraction ...
-
16.
RESEARCH OF DOMESTIC BORON CARBIDE POWDERS FOR THE PRODUCTION OF REACTION-BONDED CERAMICS
-
(Not-set)
-
The article discussed the problem of manufacturing boron carbide ceramics with high physical and mechanical characteristics. The problem of choosing raw powders and ceramic manufacturing technology is ...
-
17.
DEVELOMENT OF MANUFACTURING TECHNOLOGY OF HIGH-TEMPERATURE CERAMICS BASED ON ZIRCONIUM DIBORIDE BY PRESSURELESS SINTERING
-
(Not-set)
-
This paper presents the results of investigation on obtaining ZrB2-based ceramic by the method of slip casting followed by pressureless sintering. Optimal parameters for forming complex-shaped blanks were ...
-
18.
EFFECT OF CeO2 ON THE STRUCTURE AND PROPERTIES OF ALUMINA-ZIRCONIA CERAMICS PREPARED BY PRESSURELESS SINTERING AND HOT PRESSING
-
(Not-set)
-
The influence of ceria (CeO2: 0…3,56 wt. %) and sintering method (pressureless sintering in air, hot pressing in Ar) on the phase composition, microstructure, and properties of alumina-zirconia ceramics ...
-
19.
CONDUCTIVE PASTES FOR LOW TEMPERATURE CO-FIRED CERAMICS – A REVIEW
-
(Not-set)
-
This article presents a review of the available scientific and technical information on conductive metallization pastes used in the production by low-temperature co-fired ceramic (LTCC) multilayer electronic ...
-
20.
INVESTIGATION OF THE STRUCTURE OF A TRANSPARENT GAHNITE-BASED GLASS-CERAMICS IN THE Na2O–ZnO–MgO–Al2O3–SiO2 SYSTEM BY TRANSMISSION ELECTRON MICROSCOPY
-
(Not-set)
-
... glass-ceramic and allows the usage of ion exchange for further improve their mechanical properties. In this work, the submicrostructure of ZMAS glass-ceramic with sodium oxide additives in a transparent ...
