-
1.
THE USE OF GAS CLEANING DUST OF STEELMAKING FURNACES IN THE COMPOSITION OF CERAMIC MASSES
-
(Not-set)
-
The chemical-mineralogical compositions, new formations of crystalline phases of minerals and the main properties of the ceramic mass were studied using iron-containing dust from the gas cleaning of steel-smelting ...
-
2.
Choice of the optimal mass composition for building ceramics
-
(Science for ceramic production)
-
... refractory clays. The molding masses were compiled on the basis of mathematical planning of the "composition - property" experiment. With the optimal content of the molding mass, a sintered ceramic ...
-
3.
Calculation of the composition of ceramic mass based on acid loams added with semiacid clay
-
(Science for ceramic production)
-
A method is proposed for designing a charge composition of a two-component clay mass for the production of rough wall ceramics based on acid loams and the addition of unconventional semi-acid clay with ...
-
4.
The effect of the feldspar concentrate composition on the structure and properties of ceramic masses
-
(Science for ceramic production)
-
In the compositions of hard porcelain masses, feldspar concentrates obtained by enrichment of rocks in Karelia have been investigated. The effect of feldspar concentrates, differing in the ratio of potassium ...
-
5.
THE INFLUENCE OF SiC ADDITIVE ON THE FORMATION OF PHASE COMPOSITION AND MECHANICAL PROPERTIES OF Al2O3–ZrB2 CERAMIC COMPOSITES
-
(Not-set)
-
The effect of silicon carbide on the microstructure, phase composition, and mechanical properties of Al2O3–ZrB2 composites was investigated. It was found that in the binary Al2O3–ZrB2 composite, the aluminum ...
-
6.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC TILE IN THE COMPOSITION CLAY–DUNE SAND
-
(Not-set)
-
The article investigates the physical, mechanical and technological properties of ceramic plates in the composition of Kulatau clay and dune sands of the Tuprakkala massif located in the lower amudarya ...
-
7.
CERAMIC MASS BASED ON THE SYSTEM KAOLIN–ALUMINA-CONTAINING WASTE–DOLOMITE
-
(Not-set)
-
... mechanical properties to the fired sample. The area of optimal compositions for obtaining high-alumina ceramic masses of low-temperature sintering based on the ternary system kaolin–alumina-containing ...
-
8.
INFLUENCE OF CERIUM CONCENTRATION AND SINTERING ATMOSPHERE ON THE PHASE COMPOSITION AND LUMINESCENT PROPERTIES OF Y2.98-хCeхAl5.02О12 CERAMICS
-
(Not-set)
-
The phase composition and spectral-luminescent properties of ceramic samples obtained from oxide compositions with the general formula Y2.98-хCeхAl5.02О12 (x = 0.05, 0.10, 0.20, 0.30, 0.45, 0.60 formula ...
-
9.
INFLUENCE OF THE MINERALOGICAL COMPOSITION OF CLAYS ON THE CAPILLARY-POROUS STRUCTURE AND FROST RESISTANCE OF CERAMIC BRICKS
-
(Not-set)
-
The influence of the mineralogical composition of clays on the microstructure and frost resistance of ceramic bricks has been studied. The pore radii were calculated by the method of capillary water saturation ...
-
10.
The Phase Composition and Physico-Mechanical Properties at Different Temperatures of Ceramic Firing Earthquake-Resistant Bricks Using Ferroli
-
(Not-set)
-
Ceramic bricks based on low-melting clay and ferro-dust were obtained from self-decaying slags of low-carbon ferrochrome in the temperature range 950 - 1100 ° C, which have grades from M100 to M175, respectively. ...
-
11.
A Comprehensive Evaluation of the Effect of Mineralogical Composition of Clays and Component from Porous Glass on the Thermal Conductivity and Frost Resistance Heat-Efficient Wall Ceramics
-
(Science for ceramic production)
-
The results of studies of the porosity of heat-efficient ceramic materials based on clays of various mineralogical composition with a glass-porous component (SPC) and their effect on frost resistance and ...
-
12.
The effect of soapstone and chlorite-tremolite rocks on the phase composition and properties of ceramic tiles
-
(Science for ceramic production)
-
In the investigated rocks of talc stone (carbonate-chlorite-talc composition) and accompanying tremolite-chlorite rocks in the temperature range of 950-1100 ° C, the following processes occur: dehydration ...
-
13.
Formation of the microstructure of ceramic masses based on flotation tailings of W-Mo ores
-
(Utilization of waste)
-
The results of studying the phase compositions and the formation of the microstructure of sintered ceramic specimens based on the kaolin - chamotte - KVMR composition in order to obtain a ceramic material ...
-
14.
The effect of component composition and redox characteristics of batches on sponging of pyroplastic silicate masses
-
(Science for glass production)
-
The influence of the composition of the charge based on various silica raw materials and the redox characteristics of its components on the foaming processes in the production of glass-foam materials is ...
-
15.
Optimization of the ash content (light fraction) in compositions of ceramic tiles
-
(Science for ceramic production)
-
Using the linear regression method, it was found that the optimal content of light fraction ash in the compositions of ceramic masses for the production of facade tiles from technogenic raw materials without ...
-
16.
ELECTRON BEAM SINTERING OF ALUMINA-BASED COMPOSITE CERAMICS WITH COPPER ADDITION IN THE FORE-VACUUM PRESSURE RANGE
-
(Not-set)
-
The effect of electron-beam sintering in the fore-vacuum pressure range (8…10 Pa) on the density, structure, and phase composition of the sintered Al2O3–Cu composite with a component mass ratio of 10:1 ...
-
17.
CERAMICS BASED ON POWDERS SYNTHESIZED FROM CALCIUM NITRATE AND SILICIC ACID PREPARED VIA ION EXCHANGE METHOD
-
(Not-set)
-
... acid containing sodium ions included a reaction by-product - sodium nitrate NaNO3. Ceramics with a phase composition including cristobalite SiO2, tridymite SiO2, and sodium calcium silicate Na2Ca3Si6O16 ...
-
18.
SYNTHESIS OF MULLITE-SILICA CERAMICS WITH ENHANCED ELECTROPHYSICAL PROPERTIES
-
(Not-set)
-
... is paid to the study of the effect of heat treatment and the degree of dispersion of the starting material on the formation of the phase composition. Methods of differential thermal analysis, modeling ...
-
19.
INFLUENCE OF NANODISPERSED ALUMINUM OXIDE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF TECHNICAL CERAMICS
-
(Not-set)
-
The article presents the results of a study on the development of a composition of technical ceramics for ceramic grinding bodies and the influence of dispersed oxide on its basic properties. It is shown ...
-
20.
DEVELOPMENT OF CERAMIC BRICK COMPOSITIONS FOR RESTORATION OF HISTORICAL HERITAGES BASED ON LOESS–DEFECATE COMPOSITION
-
(Not-set)
-
They are devoted to the study of the development of composite materials for the production of ceramic bricks based on loess-like rocks from the Suzanly deposit and waste produced by Khorazm Shakar LLC, ...