-
21.
Heat-resistant thermal insulation products based on aluminosilicate fiber experience of usage in the lining of thermal units of ceramic industry
-
(Industrial experience. Energy saving.)
-
The structure and properties of the developed high-alumina products based on aluminosilicate fiber are shown. The application of the developed NK-29 products in the lining of high-temperature thermal units ...
-
22.
Development of glass-filled composite materials with improved fire resistance
-
(At the enterprises and institutes)
-
The results of the development and modeling of large-sized products based on sheet thermoplastic composite materials with increased fire resistance, which are a three-layer sandwich structure, obtained ...
-
23.
Heat insulation of refractory brickwork in glass kilns
-
(Equipment)
-
Based on the results of mathematical modeling, the average and maximum heating temperatures of the side walls of the working space of a glass-melting furnace with a specific glass removal rate of 2.9 t ...
-
24.
Ceramic coatings for gradient high temperature heat insulating materials
-
(Coatings. Enamels.)
-
Ceramic coatings based on organosilicon polymers have been investigated, and the physical, thermal and mechanical properties of coated and uncoated heat-shielding materials have been analyzed. It was found ...
-
25.
Effect of kolemanite additives on the properties, microstructure and sintering of heat-resistant spodumene ceramics
-
(Science for ceramic production)
-
... 5-7% is most effective for intensifying sintering processes and forming a denser ceramic structure. Received spodumene ceramics with TCLE (9.8 ... 12.9) & sdot; 10 -7 К -1 , heat resistance more than ...
-
26.
Thermal resistance of green container glass
-
(Science for glass production)
-
The influence of individual production factors on the heat resistance of glass containers has been studied. It is shown that the use of quartz raw materials with a grade that differs from that adopted ...
-
27.
Using of nontraditional raw materials for production of heat-resistant ceramics
-
(Science for ceramic production)
-
The possibility of using non-traditional raw materials for the production of heat-resistant cordierite-containing ceramics is shown. On the basis of refractory and low-melting Belarusian clays, cordierite-containing ...
-
28.
Foam-glass based composite heat-insulating material with protective-decorative coating of the face surface
-
(Energy saving)
-
Prospects for obtaining heat-insulating foam glass with a protective and decorative coating are considered, which will increase the water resistance, durability of the material, and also improve its decorative ...
-
29.
Water-resistance of the mold surface of float glass
-
(Science for glass production)
-
The results of studies of the water resistance of float glass from different manufacturers (both original and tempered) are presented. It was revealed that for heat-absorbing and colorless float glass ...
-
30.
Deformation of nonfired composites in heating-cooling cycles
-
(Science for ceramic production)
-
... of the samples tested during heating - cooling cycles change insignificantly (even under the influence of an external load of 0.3 MPa). The resistance of cement to deformation increases if it is subjected ...
-
31.
Elecroconducting and heat-insulating paint work materials based on nickelized glass spheres
-
(Coatings. Enamels.)
-
It has been established that nickel-plated hollow glass microspheres can be used as a conductive and heat-insulating filler for paints and varnishes to obtain coatings on their basis with low values ??of ...
-
32.
Testing of laminate glass for impact-resistance
-
(Science for glass production)
-
Comparative tests of laminated glass of various completing for impact resistance were carried out. Tests have confirmed the possibility of using glass subjected to a special heat treatment for the production ...
-
33.
Resistance to deformation of glass-ceramic material
-
(Science for glass production)
-
... influence of various factors on the amount of vertical deformation arising during heat treatment of such materials are presented. It is shown that the different nature of the crystallization processes ...
-
34.
INFLUENCE OF CONDITIONS AND MODES OF MIXTURE PREPARATION ON THE STRUCTURE AND STRENGTH OF SULFUR CONCRETE
-
(Not-set)
-
... the special shape of the blades and their location on the rotating shaft, as well as uniform heating of the mixture, high-quality mixing of ingredients is ensured to obtain a homogeneous technological ...
-
35.
THE INFLUENCE OF SiC ADDITIVE ON THE FORMATION OF PHASE COMPOSITION AND MECHANICAL PROPERTIES OF Al2O3–ZrB2 CERAMIC COMPOSITES
-
(Not-set)
-
The effect of silicon carbide on the microstructure, phase composition, and mechanical properties of Al2O3–ZrB2 composites was investigated. It was found that in the binary Al2O3–ZrB2 composite, the aluminum ...
-
36.
ELECTRON BEAM SINTERING OF ALUMINA-BASED COMPOSITE CERAMICS WITH COPPER ADDITION IN THE FORE-VACUUM PRESSURE RANGE
-
(Not-set)
-
... was investigated. It was established that the maximum density of the sintered composite (2.85 g/cm3) is achieved at a temperature of 1300 °C. It was also shown that upon heating above 1100 °C, copper migrates ...
-
37.
LTCC-RESISTORS
-
(Not-set)
-
In this paper the experience of using regular and specially developed resistive pastes for resistors compatible with LTCC substrates is reviewed. Characteristics of surface, buried, and 3D resistors manufactured ...
-
38.
ON HIGH-TECH APPLICATIONS OF ZIRCONIUM DIOXIDE, PARTIALLY STABILIZED WITH YTTRIUM OXIDE (REVIEW)
-
(Not-set)
-
... the aviation industry and the production of gas turbine engines, zirconium dioxide, partially stabilized with yttrium oxide, is used as a heat-protective coating for hot path parts. The material demonstrates ...
-
39.
DEVELOPMENT OF HIGH-TEMPERATURE THERMAL INSULATION MATERIAL BASED ON CLAY FROM THE KORNILOVSKY DEPOSIT IN THE TOMSK REGION
-
(Not-set)
-
... The physico-chemical properties of clay have been determined. The physical and technical properties of heat-insulating refractory products based on the white-burning clay of the Kornilovsky deposit have ...
-
40.
SYNTHESIS OF ALUMINUM-MAGNESIUM SPINEL FROM XEROGELS OBTAINED FROM ALUMINUM AND MAGNESIUM CHLORIDES AND NITRATES IN THE PRESENCE OF CITRIC ACID
-
(Not-set)
-
... is completely formed during heat treatment of xerogels from synthesized pairs of AlCl3 + MgCl2 salts at 900 °C and holding for 60 minutes, while they have smaller crystallite sizes compared to other heat-treated ...
