-
41.
THE INFLUENCE OF SiC ADDITIVE ON THE FORMATION OF PHASE COMPOSITION AND MECHANICAL PROPERTIES OF Al2O3–ZrB2 CERAMIC COMPOSITES
-
(Not-set)
-
The effect of silicon carbide on the microstructure, phase composition, and mechanical properties of Al2O3–ZrB2 composites was investigated. It was found that in the binary Al2O3–ZrB2 composite, the aluminum ...
-
42.
ELECTRON BEAM SINTERING OF ALUMINA-BASED COMPOSITE CERAMICS WITH COPPER ADDITION IN THE FORE-VACUUM PRESSURE RANGE
-
(Not-set)
-
... to the surface and evaporates, forming a depleted near-surface layer. The metallic Cu phase was detected only at 1100 °C (2 wt. %), whereas at higher temperatures only traces of CuO were present. The obtained ...
-
43.
STUDY OF PHYSICO-CHEMICAL AND THERMOMECHANICAL CHARACTERISTICS OF BASALT ROCKS OF THE SHEKHZHELI DEPOSIT
-
(Not-set)
-
The article presents the results of a study on the elemental and chemical–mineralogical composition, as well as the structure and morphology of samples of Shekhzheli basalt, using chemical analysis, X-ray ...
-
44.
CERAMICS BASED ON POWDERS SYNTHESIZED FROM CALCIUM NITRATE AND SILICIC ACID PREPARED VIA ION EXCHANGE METHOD
-
(Not-set)
-
... KU-2x8 sulfopolysterol cationite from top to bottom or from bottom to top were used for the synthesis of the starting powders. High-purity silicic acid, which does not contain sodium ions, was obtained ...
-
45.
INVESTIGATION OF THE STRUCTURE OF A TRANSPARENT GAHNITE-BASED GLASS-CERAMICS IN THE Na2O–ZnO–MgO–Al2O3–SiO2 SYSTEM BY TRANSMISSION ELECTRON MICROSCOPY
-
(Not-set)
-
It is known that the introduction of small Na2O additives (up to 5 mol. %) into the glass composition of the ZnO–MgO–Al2O3–SiO2 (ZMAS) does not interfere with the production of zinc spinel (ZnAl2O4) based ...
-
46.
PHYSICAL AND MECHANICAL PROPERTIES OF Al-Al2O3 CERMET WITH A HETEROGENEOUS GRANULE-LAYERED STRUCTURE PRODUCED USING MECHANICAL ALLOYING AND VACUUM SINTERING
-
(Not-set)
-
To produce Al–Al2O3 cermet with a heterogeneous granular-layered structure, mixing of flake aluminum powder of the PAP-2 brand with the plasma-chemical alumina powder (PCAP) consisting of nano-thick lamellar ...
-
47.
THE PROCESS OF FORMATION OF CRYSTALLINE PHASES IN HEAT-RESISTANT CORDIERITE-CONTAINING ELECTRICAL MATERIALS
-
(Not-set)
-
The article presents the results of studies of heat-resistant insulating ceramics, as well as a mechanism of cordierite phase formation during single firing of compositions containing polymineral clay ...
-
48.
STUDY OF CHARACTERISTICS OF ADHESIVE PERMANENT JOINTS IN REACTION-SINTERED CERAMIC MATERIALS BASED ON SILICON CARBIDE
-
(Not-set)
-
Laboratory samples of reaction-sintered silicon carbide ceramics with permanent adhesive joints were obtained based on isopropyl alcohol and phenol-formaldehyde resin solutions with different contents ...
-
49.
ADHESION OF (Ge21Te79)100 – x(AgI)x (x = 30, 40, 50) GLASSES AND MELTS TO QUARTZ GLASS
-
(Not-set)
-
The effect of the temperature of adhesive contact formation on the interphase boundary strength in the (Ge21Te79)100 – x(AgI)x glass–quartz glass systems has been studied. The values of the contact angles ...
-
50.
INFLUENCE OF NANODISPERSED ALUMINUM OXIDE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF TECHNICAL CERAMICS
-
(Not-set)
-
The article presents the results of a study on the development of a composition of technical ceramics for ceramic grinding bodies and the influence of dispersed oxide on its basic properties. It is shown ...