-
1.
FILTER ELEMENTS BASED ON ALUMOSILIATE FIBERS FOR SELECTIVE CATALYTIC REDUCTION OF NITROGEN OXIDES – A REVIEW
-
(Not-set)
-
A review of oxide compositions, developed for ceramic aluminosilicate fibers -based filter elements modification for the purpose of the selective catalytic reduction of nitrogen oxides in the purification ...
-
2.
INVESTIGATION OF THE LANTHANUM HEXABORIDE OBTAINING PROCESSES BY THE METHOD OF BOROTHERMAL REDUCTION
-
(Not-set)
-
... available on the market (such as oxygen, iron, carbon, etc.) has a negative impact on the performance characteristics of the resulting materials and products from them. The paper presents the results of ...
-
3.
Obtaining Finely Dispersed Spheric Particles of Iron-Oxide Pigments from
Kazakhstan Diatomites
-
(Raw materials)
-
It is proposed to use natural raw materials - ferruginous diatomites from the Zhalpak deposit (Kazakhstan) as an affordable cheap raw material for obtaining complex iron oxide silica-containing pigments. ...
-
4.
Efficiency of iron removal in caoline biochemical processing
-
(Raw materials)
-
The efficiency of iron removal in the biochemical method of kaolin processing depends on the particle size of iron minerals, their magnetic properties and structural organization - weakly crystallized ...
-
5.
Bioreduction of Fe(III) during caoline dispersion storage period
-
(Raw materials)
-
The efficiency of iron removal from kaolin increases with the inclusion of iron bioreduction in the technological scheme. The process can be accelerated by a combination of factors of humidity and temperature ...
-
6.
Biochemical method of iron elimination and colour characteristics of deferrized porcelain
-
(Raw materials)
-
The flowchart of a two-stage method for removing iron from the composition of porcelain stone is presented: with a combination of bio- and chemical reduction of iron under conditions of stagnant and water ...
-
7.
Biochemical method of iron removal from Zhuravliny Log kaolin
-
(Raw materials)
-
The reasons for the low efficiency of reducing the iron content in the kaolin composition of the Zhuravliny Log deposit by the method of dry classification by fractions are analyzed. The technology of ...
-
8.
The effect of iron oxides on their tendency to fiber formation
-
(Cast stone)
-
... ferric and ferric iron, are presented. It is shown that with a decrease in the concentration of iron oxides in the melt, its ability to continuously fiberize due to the violation of the glass structure ...
-
9.
The effect of argon plasma on reduction of oxides of varying valence upon mineral synthesis
-
(At the enterprises and institutes)
-
The results of studies of plasma treatment of chromium, titanium and iron oxides are presented. It is shown that oxides of variable valence are partially reduced in argon plasma. Tab. 1, ill. 2, bibliography: ...
-
10.
INORGANIC GLASS SCINTILLATORS: COMPOSITIONS AND PROPERTIES
-
(Not-set)
-
Inorganic glass scintillators are an important class of materials for detecting ionizing radiation in medicine, nuclear power, high-energy physics, and security systems. Despite their lower light yield ...
-
11.
SYNTHESIS OF GREEN LUMINESCENT BLUE PIGMENTS FROM PHOSPHOGYPSUM
-
(Not-set)
-
The paper investigates the possibility of obtaining green inorganic pigments with the simultaneous presence of luminescent properties during the heat treatment of chemical industry waste phosphogypsum. ...
-
12.
LASER-INDUCED TRANSFER OF COLORING AGENT TO GLASS FOR MARKING STRUCTURAL OPTICS PRODUCTS
-
(Not-set)
-
A laser marking process for glass products was studied. This process involves laser-induced transfer of ink vapor to the product surface upon irradiation from the opposite side through the glass. A pulse-periodic ...
-
13.
APPLICATION OF OIL SLUDGE AS A BURNOUT ADDITIVE IN FIRING OF ALMOSILICATE CERAMICS
-
(Not-set)
-
The possibility of using pyrolysis products of oil-containing waste, including oil sludge, in the synthesis of porous ceramics is shown. High carbon content in pyrolysis products of oil sludge determines ...
-
14.
STUDY OF PHOSPHOGYPSUM HEAT TREATMENT MODES FOR OBTAINING ULTRAVIOLET PIGMENTS
-
(Not-set)
-
The paper investigates the possibility of thermal processing of waste from the chemical industry – phosphogypsum. It is shown that when phosphogypsum is dried, partial dehydration of dihydrous calcium ...
-
15.
PREPARATION OF SELECTIVE VANADIUM-CONTAINING LAYERS ON THE OUTER SURFACE OF a?-Al2O3 BASED TUBULAR CERAMIC MEMBRANES
-
(Not-set)
-
The processes of obtaining selective vanadium-containing layers on the outer surface of tubular ceramic membranes based on a-Al2O3 for use in the petrochemical industry have been studied. A layer of V2O5?1.6H2O ...
-
16.
ASSESSMENT OF THE EFFECT OF LITHIUM CHLORIDE ON THE PROPERTIES OF BOROPHOSPHATE GLASS DURING THE IMMOBILIZATION OF RADIOACTIVE WASTE FROM PYROCHEMICAL PROCESSING OF SPENT NUCLEAR ...
-
(Not-set)
-
The paper presents the results of the studies of a matrix based on borophosphate glass (BFS) with the addition of lithium chloride as a simulator of spent electrolyte, a type of radioactive waste formed ...
-
17.
JOINT PROCESSING OF QUARTZ-LEUCOXENE CONCENTRATE AND BRUCITE CONTAINING WASTE FROM THE PRODUCTION OF REFRACTORY MATERIALS TO OBTAIN COMPLEX COAGULANTS
-
(Not-set)
-
The volumes of large-tonnage mineral waste generation cause serious concern from the side of environmental supervision. Most of the mineral waste is a valuable secondary raw material, but the lack of integrated ...
-
18.
PREPARATION OF NIOBIUM (V) OXIDE WITH CONTROLLED DISPERSITY AND MORPHOLOGY
-
(Not-set)
-
In this work, the effect of the annealing temperature and the chemical history of the precipitate on the morphology and phase composition of the Nb2O5 powder was studied. Nb2O5?nH2O precipitate and gel-like ...
-
19.
Anortite-Containing Construction Ceramics Using Sludge Waste of Metallurgical Production
-
(Not-set)
-
Comprehensive studies of anorthite-containing building ceramics, obtained on the basis of clay and sludge waste from metallurgical production, have been carried out. Component compositions were selected ...
-
20.
Fly Ash as a Technogenic Raw Material for the Production of Re-fractory and Insulating Ceramic Materials (Review)
-
(Not-set)
-
A review of the literature on the production of fly ash at thermal power plants and the level of its processing in Russia and abroad is presented. The properties of fly ash and its fields of application ...