-
21.
Cases Concerning the Use of Diagonal Plows in the Glass Mixture and Glass Cullet Transportation Lines
-
(Equipment)
-
... with an electromagnetic vibrator is presented. An adaptive algorithm for controlling the unloading of batch and cullet from a belt conveyor is presented. The possibility of additional mixing of these materials ...
-
22.
Effect of molding composition and properties on alumina block substrates characteristics
-
(Science for ceramic production)
-
... the textural and strength characteristics of the blocks after annealing were determined. It is shown that the use of corundum powder obtained by mixing particles of different sizes leads to the production ...
-
23.
Bin glass batch mixers
-
(Equipment)
-
... using kubels, as well as vibrating, screw and belt feeders for unloading the charge from mixing apparatus, is shown. Some variants of rotary vibration mechanisms are presented for unloading a mixture of ...
-
24.
Structure and SO3 ions structural state in sulphate-containing glasses (a review)
-
(Science for glass production)
-
A review of the literature data on sulfate-containing glasses in silicate, borate, and phosphate systems is presented. Experimental data confirm the finding of the [SO 4 ] 2- group in an isolated state ...
-
25.
Structure of tuyere level zone in a bubbling layer bath furnace with gas injection through a tuyere located in a side wall below glass melt
-
(Science for glass production)
-
Possible modes of gas outflow into the molten glass layer through a horizontal tuyere, as well as the structure of the blowing zone formed in this case, are investigated on a physical model of a glass-making ...
-
26.
Effect of nanosized petrochemical waste with high alumina content on clinker heat resistance
-
(Science for ceramic production)
-
Studies have shown that it is advisable to use high-alumina nanotechnological raw materials as a softener to increase the thermal stability of clinker bricks. With an increase in the compositions of the ...
-
27.
Improvement of glass batch transporter lines
-
(Equipment)
-
... Shown are various options for technological schemes of the mixing department of the charge, located outside the compound shop. An algorithm for the use of a conditionally defective charge using a backup ...
-
28.
Investigation of parameters determining foam slag-glass structure and properties
-
(Science for glass production)
-
The influence of the particle size of the charge and its mixing on the structure and properties of the foam slag glass is considered. At different temperatures, samples of foam slag glass were synthesized ...
-
29.
Physico-chemical and processing conditions of glass melt tinting
-
(Science for glass production)
-
The main conditions for the dissolution of dyes in glass melts are considered: chemical interaction, diffusion, distribution in the volume or in a certain layer. The features of continuous volumetric and ...
-
30.
Dissolution of solids in glass-forming melts
-
(Science for glass production)
-
A generalized analysis of the process of dissolution of solid particles in glass-forming melts is carried out. Data were obtained on the kinetics of dissolution of quartz grains, and the kinetic function ...
-
31.
Processes of grinding and mechanochemical activation in technology of oxide ceramics (review)
-
(Science for ceramic production)
-
The classification of grinding equipment and conditions affecting the process of mechanical processing of raw materials for the production of oxide ceramics is presented. Based on the analysis of grinding ...
-
32.
Yachevskii Optimization of physical and chemical processes upon glass batch preparation and assessment of the humidity effect on the efficiency of glass melting
-
(Science for glass production)
-
The analysis of physical and chemical processes and individual factors affecting the homogeneity of the charge both when mixing the components of the charge in the mixer of the compound shop, and during ...
-
33.
The effect of the redox potential on the susceptibility of glass to bubble nucleation
-
(Science for glass production)
-
... potential. Mixing cullet with an increased reduction potential to the container glass melt with an oxidizing potential and vice versa violates the solubility of sulfur in the molten glass, increases the ...
-
34.
Production of tiles from low-grade clay raw
-
(Science for ceramic production)
-
... methods to improve the quality of clay raw materials: processing of raw materials in an electric mass classifier, mixing clays with activated water, introducing technological additives into the raw materials ...
-
35.
Extrusive formation of kaolin-based sorbents
-
(At the enterprises and institutes)
-
... urea negatively affects the formability of kaolin masses. Treatment of kaolin with acetic acid and subsequent mixing of the mass with water glass reduces the suitability for extrusion; on the other hand, ...
-
36.
Technological aspects of using raw materials in glass industry
-
(Science for glass production)
-
A further increase in the efficiency of glass-making processes depends on improving the uniformity of the charge used. To obtain a homogeneous mixture and prevent its delamination, it is necessary to calculate ...
-
37.
Sol-gel production of ceramic pigments with diopside and anorthite structures
-
(Coatings. Enamels.)
-
... the processes of synthesis of the crystal structure of anorthite and diopside due to better homogenization and averaging of the components of the charge even at the mixing stage. A positive fact is the ...
-
38.
The effect of electric activation of the liquid-glass binder on the sand blend quality
-
(At the enterprises and institutes)
-
... its concentration. This makes it possible to improve the quality of abrasive products containing electroactivated glass due to better mixing and to exclude an additional adhesive additive, dextrin, from ...
-
39.
Ceramic tiles from the onsite polymineral clays
-
(Science for ceramic production)
-
It is shown that from polymineral clays of the Republic of Tatarstan using methods that improve the quality of clay raw materials - mixing the mass with activated water, processing the raw material in ...
-
40.
Object-target analysis of glass-batch production technology
-
(Science for glass production)
-
The solution to the problem of analyzing modernized glass production technologies, in particular, the technological process of preparation, dosing and mixing of glass batch, in the form of an algorithmic ...
