-
21.
Heat-resistant thermal insulation products based on aluminosilicate fiber experience of usage in the lining of thermal units of ceramic industry
-
(Industrial experience. Energy saving.)
-
The structure and properties of the developed high-alumina products based on aluminosilicate fiber are shown. The application of the developed NK-29 products in the lining of high-temperature thermal units ...
-
22.
Systematic approach to secondary products implementation in glass-making
-
(Environmental protection. Utilization of waste)
-
The technological features of the use of secondary products in the technology of silicate materials are considered; the main problems that must be taken into account when using secondary products and substandard ...
-
23.
Nanoscale morphology of synthetic leucoxene processing powdered products
-
(Science for ceramic production)
-
Titanosilicates with the structure of natisite Na 2 TiSiO 5 have been synthesized using titanium-silicon intermediate products formed during processing of leucoxene ores as precursors. Using the method ...
-
24.
Composite bioceramics based on octacalcium phosphate decom-position products
-
(Biomaterials)
-
Composite bioceramics with a density of at least 80% of the theoretical was obtained from thermolyzed octacalcium phosphate (OCP). OCP processing temperatures were 450, 600, and 700 ° C. Ceramics were ...
-
25.
XXI International scientific and technological conference Con-structions and technologies for non-metal products manufactur-ing October 5 ? 7, 2016. [3rd
cover page]
-
(Information)
-
-
26.
Effect of biofuel combustion products on refractory material phase composition and structure
-
(At the enterprises and institutes)
-
... of studies carried out using modern methods and their analysis in comparison with the literature data on the chemical composition of volatile combustion products of biofuel and their physicochemical properties, ...
-
27.
Catalytic metalloceramic membrane for by-products processing in fuel production
-
(Science for ceramic production)
-
The processing of waste by-products in water, stoichiometrically formed as a result of the Fischer-Tropsch process, during the production of fuel materials is considered. Theoretical and experimental studies ...
-
28.
Phase composition of combustion products for ferrosilicoaluminium in nitrogen with fluorous additions
-
(Science for ceramic production)
-
The results of a study of the combustion process of ferrosilicoaluminum (FSA) in nitrogen in the presence of fluorine-containing additives are presented. The phase composition of the combustion products ...
-
29.
Refractory products of the JSC AGC Bor glass works
-
(At the enterprises)
-
Shown is the work of a polished glass company. Refractories are produced for the needs of the company and to order. The production of mullite bottom bar has been mastered. An integrated quality management ...
-
30.
Advanced kaolin-containing products of the Plast-Rifey JSC
-
(Information)
-
-
31.
Phase composition of ceramics based on calcium hydroxyapatite powders containing satellite products of synthesis
-
(Biomaterials)
-
The formation of the microstructure of ceramics based on calcium hydroxyapatite (HAP) powders containing various by-products of the synthesis reaction - NaCl, KCl, KCH 3 COO (K 2 СО 3 < / sub>), NaCH ...
-
32.
T. M. Argynbaev and Z. V. Stafeeva Kaolin-containing products from the deposit Zhuravlinyi Log
-
(Raw materials)
-
The use of enriched kaolin from the Zhuravliniy Log deposit is widely used in the production of various ceramic products. On the basis of this kaolin, Plast-Rifey CJSC has mastered the production of chamotte ...
-
33.
Structure and properties of nanoproducts of the system P2O5 - SiO2
-
(Coatings)
-
Sol-gel method from film-forming solutions based on tetraethoxysilane and phosphoric acid, ethyl alcohol, water, thin films and dispersed products were obtained in the SiO 2 - P 2 O 5 system at a ...
-
34.
Study of the surface homogeneity of ceramic semiproducts and articles using capillary suction
-
(Science for ceramic production)
-
The uniformity of the surface of semi-finished products and ceramic products was investigated by the method of capillary suction. A comparison is made of the degree of surface heterogeneity, determined ...
-
35.
Phase composition of the combustion products upon ferrosilicon burning in nitrogen with F-containing additives present
-
(Science for ceramic production)
-
The effect of fluorine-containing additives (ammonium fluoride and topaz concentrate) on the phase composition of the combustion products of ferrosilicon in nitrogen and the morphology of particles of ...
-
36.
Phase composition of the products obtained upon nitriding of ferrosilicon added with zircon concentrate
-
(Science for ceramic production)
-
... in the presence of zircon (5 - 70%) is carried out in the surface mode, and the combustion products are multiphase. With optimal synthesis parameters (nitrogen pressure 4 - 7 MPa, sample diameter 35 - ...
-
37.
Phase composition and morphology of the products of ferrosilicon burning in nitrogen
-
(Science for ceramic production)
-
The results of a study of the phase formation of silicon nitride during the combustion of ferrosilicon in gaseous nitrogen are presented. It is shown that the formation of a- or b-modifications of silicon ...
-
38.
Ceramics based on the by-products of mineral industry and wastes of alumina production
-
(Utilization of waste)
-
The possibility of obtaining chemically resistant plastic molding ceramics from masses on the basis of the complex use of associated mining products (plagioporphyr, quartz-biotite shale), alumina production ...
-
39.
Composition and aggregative state of the products of TiO2 heating in argon atmosphere
-
(Science for ceramic production)
-
Compositions of condensed matter are calculated using thermodynamic modeling methods taking into account the existence of solid and liquid solutions from TiO 2 , TiO, Ti 2 O 3 , Ti 3 O 5 and Ti ...
-
40.
Complex study of the iron ore-beneficiation products for silicate material production
-
(Raw materials)
-
... is studied. The possibility of using waste both as a base and as an additive for the production of wall materials, household products, glaze coatings and glass-crystalline materials has been revealed. ...
