-
1.
The influence of woven mineral fillers chemical nature on polymer composite materials properties
-
(At the enterprises and institutes)
-
The physicomechanical (density, tensile and compressive strength), thermophysical (TCLE) and dielectric (dielectric constant) properties of polymer composite materials based on woven fillers of mineral ...
-
2.
CERAMIC COMPOSITE MATERIALS IN THE Ca2P2O7–Ca3(PO4)2 SYSTEM BASED ON POWDER MIXTURES INCLUDING CALCIUM PHOSPHATE OF NATURAL ORIGIN AND MONOCALCIUM PHOSPHATE MONOHYDRATE
-
(Not-set)
-
Ceramics in the Ca2P2O7–Ca3(PO4)2 system were obtained from powder mixtures containing calcium hydroxyapatite Са10(РО4)6(ОН)2 of natural origin and monocalcium phosphate monohydrate Ca(H2PO4)2·H2O. Fish ...
-
3.
CERAMIC-FORMING ORGANOSILICON POLYMER AS A MODIFIER OF HEAT-INSULATING SYNTHETIC MATERIAL
-
(Not-set)
-
The paper presents the results of obtaining hardened synthetic carbon materials that can be used for technical thermal insulation under conditions of elevated pressures and temperatures. The hardened syntactic ...
-
4.
Ecogeopolymers Based on Ash Waste CHPP – Prospective Materials for Road Construction in the Arctic Zone
-
(Not-set)
-
In the course of the study, the possibility of using ash and slag waste from the thermal power plant of the Arctic zone as raw materials for the production of porous ecogeopolymers was studied. The assessment ...
-
5.
Estimation of Bioactive Properties of the Mineral-Polymer Composite "Calcium Phosphates – Polylactide
-
(Not-set)
-
The paper studies the bioactivity of hybrid composite materials containing calcium phosphates up to 60 %
by weight and polylactide (PLA) with additives of glycerol and sorbitol, in situ and in vitro. ...
-
6.
Properties of stereolithography-produced composite with calcium phosphate filled polymer matrix for ceramics with defined porous space architecture
-
(Biomaterials)
-
A study of the process of removing the organic component from composites (photopolymer / calcium phosphate) of complex architecture, obtained by 3D printing for the creation of personalized bioceramic ...
-
7.
Influence of SiO2/Al2O3 ratio on structure, properties and heat resistance of geo-polymer refractory materials
-
(At the enterprises and institutes)
-
A study of the properties of lightweight geopolymer materials (GM) based on refractory technogenic waste of aluminosilicates has been carried out. The effect of the ratio of oxides SiO 2 and Al 2 O ...
-
8.
Development of glass-filled composite materials with improved fire resistance
-
(At the enterprises and institutes)
-
The results of the development and modeling of large-sized products based on sheet thermoplastic composite materials with increased fire resistance, which are a three-layer sandwich structure, obtained ...
-
9.
Use of glass-roving for reinforced polymer composites spray-manufacturing
-
(At the enterprises and institutes)
-
A mechanized technology for the production of large-sized fiberglass products by spraying has been developed. The technical feasibility and economic feasibility of using composite materials based on unsaturated ...
-
10.
Fiberglass impregnation in polimer composite materials pultrusion
-
(At the enterprises and institutes)
-
The results of a theoretical study of the process of impregnation of glass fibers in the manufacture of highly filled composites by pultrusion are presented. The criterion is the maximum intensity of the ...
-
11.
Physical and mechanical properties of light-curing composite materials
-
(Biomaterials)
-
Light-curing composite dental materials, consisting of an inorganic filler (glass), a polymer matrix, and a bonding layer, are considered. The requirements for them by modern therapeutic dentistry are ...
-
12.
TESTING POLYMER COATINGS FOR THE PURPOSES OF RESTORING AND REPAIRING CONCRETE STRUCTURES AT THE YAKUTSK CLIMATE STATION
-
(Not-set)
-
The adhesion properties of polyurethane- and polyurea-based polymer coatings designed to protect concrete were studied under the climatic conditions of Yakutia. Coated concrete samples were exposed to ...
-
13.
STRUCTURE AND ELECTRICAL PROPERTIES OF MULTILAYER CERAMIC MATERIALS BASED ON MODIFIED POTASSIUM POLYTITANATES
-
(Not-set)
-
Some ceramic materials formed by sintering layered green bodies formed the compacted powders of the basic potassium polytitanate and this one modified with Mn compound are produced and investigated. Using ...
-
14.
HEAT-INSULATING MATERIALS BASED ON EXPANDED ROCKS OF UZBEKISTAN
-
(Not-set)
-
The work is devoted to the issues of obtaining thermal insulation materials using local mineral resources. The focus of this study is to create refractory thermal insulation consisting of a porous filler ...
-
15.
PHYSICAL AND MECHANICAL CHARACTERISTICS OF CERAMIC MATERIALS OF SYSTEMS ZrO2–Sm2O3 TWO-PHASE COMPOSITION
-
(Not-set)
-
Ceramic Materials of Compositions (mol. %) 97ZrO2–3Sm2O3 and 94ZrO2–6Sm2O3 based on nanosized powders synthesized by hydrolysis sol-gel method are obtained. It is shown that in ceramic materials a two-phase ...
-
16.
SYNTHESIS OF SILICON OXYCARBIDE COMPOSITE MODIFIED WITH TITANIUM OXIDE
-
(Not-set)
-
The work is devoted to the synthesis of silicon oxycarbide composite modified with titanium oxide by joint mechanical treatment of white soot and activated carbon with TiO2 particles deposited on its surface. ...
-
17.
THE INFLUENCE OF THE ADDITION OF SLAG WASTE FROM THE NOVOCHERKASSK SDPP ON THE PROPERTIES OF ALUMINOSILICATE MATERIALS BASED ON DRILL WASTES FROM THE VOSTOCHNO-CHUMAKOVSKOYE OIL ...
-
(Not-set)
-
The essence of the method of horizontal drilling using hydraulic fracturing is described. The influence of drill wastes and coal combustion waste on the environment is shown. A number of physical and chemical ...
-
18.
APPLICATION OF SOL-GEL TECHNIQUE FOR SYNTHESIS OF NANOSTRUCTURED PIEZOELECTRIC MATERIALS IN LEAD ZIRCONATE-TITANATE SYSTEM – A REVIEW. PART 2. SYNTHESIS OF FILM AND ROD STRUCTURES
-
(Not-set)
-
In the present study, we review current progress in sol-gel techniques for synthesis of ferroelectric powders, thin films and rods in lead zirconate-titanate system, as well as methods for obtaining controlled ...
-
19.
GLASS FILLERS BASED ON THE SrO–Al2O3–B2O3–SiO2 SYSTEM FOR DENTAL COMPOSITES
-
(Not-set)
-
... chemical resistance to water, acids and alkalis (class I), high transparency (more than 80 %), consistency with the polymer matrix according to CTE while maintaining of an acceptable melting temperature ...
-
20.
APPLICATION OF ADDITIVE TECHNOLOGIES FOR OBTAINING OF SILICON CARBIDE CERAMIC MATERIALS
-
(Not-set)
-
The types of additive manufacturing and the prospects of their application for the production of articles from ceramic materials are considered. The most popular for obtaining parts of complex configurations ...
