-
21.
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
-
(Not-set)
-
The functional ceramic materials are broadly used in the electronic industry. Many of them are comprised of ferroelectric materials because of their outstanding piezoelectric and dielectric properties. ...
-
22.
MODIFICATION OF PROPERTIES OF BASALT FIBER-REINFORCED PLASTIC DURING MOISTURE DIFFUSION AT ROOM TEMPERATURE
-
(Not-set)
-
Three batches of unidirectional basalt fiber-reinforced plastic were fabricated as plates, and continued tests were performed under load at room temperature and in a closed desiccator at a 99 % moisture ...
-
23.
OXIDE-CONTAINING MINERAL FIBERS: TYPES, METHODS OF PRODUCTION, APPLICATION AND MANUFACTURERS (REVIEW)
-
(Not-set)
-
The article provides an overview of mineral oxide fibers of various chemical composition: aluminosilicate, alumina, silica, bio-soluble, zirconium oxide fibers and others. Methods for producing discrete ...
-
24.
Ecogeopolymers Based on Ash Waste CHPP – Prospective Materials for Road Construction in the Arctic Zone
-
(Not-set)
-
In the course of the study, the possibility of using ash and slag waste from the thermal power plant of the Arctic zone as raw materials for the production of porous ecogeopolymers was studied. The assessment ...
-
25.
A New Design of a Pendulum Clamshell for the Formation of Mineral Wool Products
-
(Not-set)
-
The necessity of developing a new design of the pendulum clamshell for the formation of mineral wool products is shown. One of the possible variants of the design of mechanical-driven pendulum clamshells ...
-
26.
Plasma Technology for the Production of Glass
Pellets Based on Waste from the Enrichment of Ferruginous Quartzite KMA
-
(Not-set)
-
A technology has been developed for producing glass microspheres in a plasma reactor based on the wastes of enrichment of ferruginous quartzites KMA. The regularities of the influence of the flow rate ...
-
27.
Heat-Resistance Improvement of Glass Fiber-Reinforced Plastics under Industrial
Conditions
-
(Not-set)
-
Pilot winding of three batches of fiberglass rods was carried out on the production line. The optimal composition of the EDI binder was selected with the ratio of the components ED-22 / IMTGFA / UP-606/2 ...
-
28.
Fly Ash as a Technogenic Raw Material for the Production of Re-fractory and Insulating Ceramic Materials (Review)
-
(Not-set)
-
A review of the literature on the production of fly ash at thermal power plants and the level of its processing in Russia and abroad is presented. The properties of fly ash and its fields of application ...
-
29.
The Dielectric Method for Controlling the Recipe and Technologi-cal Parameters Upon Receipt of Sodium Silicate Materials
-
(Not-set)
-
The results of the study of the dielectric constant & # 949; modified sodium silicate compositions (SNK) depending on the content of the modifying zinc-containing aqueous solution (zinc acetate) and the ...
-
30.
The Phase Composition and Physico-Mechanical Properties at Different Temperatures of Ceramic Firing Earthquake-Resistant Bricks Using Ferroli
-
(Not-set)
-
Ceramic bricks based on low-melting clay and ferro-dust were obtained from self-decaying slags of low-carbon ferrochrome in the temperature range 950 - 1100 ° C, which have grades from M100 to M175, respectively. ...
-
31.
Effect of Combined Use of Mineral Wool Production Waste and Catalytic Cracking Catalyst Waste on the Structure and Properties of Ceramics
-
(Not-set)
-
The combined use of waste from the production of mineral wool (MB) and spent catalyst (MC) of catalytic cracking of petroleum products in the production of ceramics has been investigated. It was found ...
-
32.
New Technology for Forming Mineral Products
-
(Not-set)
-
A new technology for the formation of a multilayer mineral wool carpet by means of a pendulum zigzag layout of a primary mineral wool carpet is described, which consists in the formation of a loop with ...
-
33.
The Influence of Molarity and Temperature of the Alkaline Activator Solution on the Rheological Properties and Structure Formation of Alkaline Activated Refractory
Materials
-
(Not-set)
-
The effect of molarity (from 3.64 to 1.74 M) of a solution of an alkaline activator (ALA) and temperature (from 10 to 20 ° C) of a mixture of alkali-activated materials (ALA) based on chamotte and metakaolin ...
-
34.
Production Technology of Ceramic Materials for Hydrocylones Liner
-
(Not-set)
-
The development of effective ceramic lining materials is an important industry challenge. Alumophosphate binder materials may be considered new for hydrocyclone applications. This work is devoted to the ...
-
35.
Obtaining Hollow Glass microspheres and Their Application in the Production of Water-Dispersion Coatings
-
(Science for glass production)
-
The results of obtaining hollow glass microspheres and their effect on the properties of facade water-dispersion paints and varnishes when replacing titanium oxide and calcium carbonate in the formulation ...
-
36.
Improving Technology of Ceramic High-Porous Permeable Cellular Materials
-
(Science for ceramic production)
-
... (HPCM) by duplicating the structure of polymer matrices, the minimum possible ratio of the dispersed phase and the dispersion medium S: L is 2.3: 1, and the mass content of polyvinyl alcohol in corundum ...
-
37.
Study of the Effect of Paraffin Production Waste on the Properties of Ceramic Products
-
(Utilization of waste)
-
The possibility of using (2.5 - 10 & # 37; by weight) wastes from the production of paraffin wax (OPP) in the production of porous ceramics has been investigated. Additive 2.5 & # 37; OPP increases the ...
-
38.
Phase composition in core-shell transition layer in matrix structure of construction ceramics made from lean raw materials with clay addition
-
(Science for ceramic production)
-
The process of the proposed technology for the formation of a transition layer between the dispersion medium and the dispersed phase of a ceramic matrix composite is investigated, and a technique for the ...
-
39.
Production of aluminum-graphite composite by spark-plasma sintering
-
(At the enterprises and institutes)
-
An alumina-graphite composite was obtained by the method of spark-plasma sintering. The influence of the size of graphite particles, the compaction temperature and the holding time on the formation of ...
-
40.
Additive techniques for ceramics manufacturing
-
(Science for ceramic production)
-
A review of publications devoted to additive technologies used in the production of ceramic products is presented. Methods for molding articles from sedimentation-resistant systems are described in most ...
