-
21.
Discolouration of glass melt fabricated with local raw materials
-
(Science for glass production)
-
Samples of glasses were synthesized using raw materials from the Ural region and decolouring agents; the chemical composition is selected for sheet thermally polished glass. It is proposed to discolor ...
-
22.
Composite optically transparent conductive coatings on a glass substrate
-
(Coatings)
-
Transparent electroconductive coatings on glass substrates (transparent electrodes) based on functionalized multi-walled carbon nanotubes have been obtained. The effect of glass pretreatment with 3-aminopropyltriethoxysilane ...
-
23.
Obtaining ceramdor on the basis of clays of the Tyumen region [43-46]
-
(At the enterprises and institutes)
-
The composition and properties of clays of the Tyumen region have been investigated in order to be used in the production of ceramic aggregate? keramdor. It was found that the clays are acidic, have a ...
-
24.
Basalt fibers produced in solar furnace
-
(Science for glass production)
-
The possibility of obtaining basalt fiber based on mineral raw materials of Uzbekistan using heating with concentrated solar radiation has been investigated. The phase composition and properties of basalt ...
-
25.
Interaction in sodium sulphate - carbon batches of various dispersity
-
(Science for glass production)
-
We studied mixtures in the Na 2 SO 4 + C + SiO 2 system after heat treatment at different temperatures. A characteristic feature of the interaction at 900 ° C is the flotation of quartz grains with ...
-
26.
Effect of glass batch redox potential on glass melting and properties
-
(Science for glass production)
-
An analytical review of the literature on the change in the processes of glass melting, the thermal transparency of the molten glass, the light transmission of glass, depending on the redox potential of ...
-
27.
Ceramic materials made of low-melt clays modified with glass fiber production waste
-
(Utilization of waste)
-
The use of waste from a fiberglass plant allows not only to solve a serious environmental problem, but also to improve the quality of building ceramics produced at brick factories.
-
28.
Indicator glasses for dust pollution
-
(Science for glass production)
-
Compositions of magnesium silicophosphate glasses have been developed, in which a radioactive isotope of phosphorus 32 P with a half-life of 14.22 days is formed during irradiation in a neutron flux. ...
-
29.
Computational methods of estimating the influence of stress on glass cutting quality
-
(Science for glass production)
-
The characteristics of residual stresses arising in the production of float glass are given. Their types, causes of occurrence, size and direction are described. The non-cut fault condition is mathematically ...
-
30.
The influence of porous space on strength behaviour of ceramics
-
(Science for ceramic production)
-
The results of a study of the effect of pore space and microcracks on the strength of ceramics are presented.
-
31.
The impact of thermochemical treatment of glass samples on its heat resistance and the nature of destruction
-
(Science for glass production)
-
The results of studies of the thermal stability of float glass samples with modified surfaces are presented. The nature of glass destruction during testing is shown. It was found that the thermochemical ...
-
32.
Using of captured cement dust in melting of large-usage glass
-
(Science for glass production)
-
The prospect of using dust from electrostatic precipitators of cement production for melting sheet (heat-absorbing) and container glass is shown. The addition of 5 - 15% dust to the charge makes it possible ...
-
33.
Using of the glass cut in the manufacture of building materials
-
(Utilization of waste)
-
The issues of the formation of glass breakage both in the form of solid household waste and at the industrial processing of flat glass are considered. The prospect of using cullet in the manufacture of ...
-
34.
Jubilee of I. N. Gorina
-
(Anniversaries)
-
-
35.
The modern technologies of float glass cutting
-
(Science for glass production)
-
The main types of cutting of sheet glass are considered. Mechanical roller cutting is described in most detail as the most common at the moment. Explains the effect of roller geometry and loading on edge ...
-
36.
Glass formation in the mixture added with cement production waste
-
(Utilization of waste)
-
The possibility and prospects of using cement production waste (dust from electrostatic precipitators) in glassmaking have been assessed. It is shown that the introduction of 5 to 15% of dust into the ...
-
37.
Synthesis of polyphosphate glass
-
(Science for glass production)
-
Multicomponent spatially crosslinked polymers based on ultraphosphates with a glass transition temperature of 123 - 302 ° C have been synthesized. Their hydrolytic stability (the rate of weight loss during ...
-
38.
Analysis of the microstructure, surface quality and properties of alumina substrates
-
(Science for ceramic production)
-
The study of the surface quality of three types of corundum materials for microcircuit substrates has been carried out. It is shown that the surface quality after grinding and polishing depends on the ...
-
39.
Development of low-melting glass for decoration of facing materials
-
(Science for glass production)
-
The compositions of low-melting glasses based on the sodium borosilicate system have been developed. The effect of the composition on the thermal properties of glasses has been studied. The possibility ...
-
40.
Formation of glass synthesized by sol-gel technology
-
(Science for glass production)
-
Based on the analysis of the EPR spectra, the process of glass synthesis by the sol-gel method is studied. The processes of gelation and formation of xerogels are considered depending on the temperature-time ...
