-
21.
The electric field effect on the viscosity of thermoplastic ceramic slurry and deformation of the component parts upon elimination of organic binders
-
(Science for ceramic production)
-
The results of the study of the influence of the electric field on the viscosity of thermoplastic ceramic slips VK95-1, VF52.42-1 and on the deformation of castings when the organic binder is removed are ...
-
22.
Corundum filtering ceramics on phosphate binders
-
(Science for ceramic production)
-
The effect of various pore-forming additives in the form of recycled Claus catalyst, gypsum and coke on the physical and technical characteristics and permeability of the structure of corundum ceramics ...
-
23.
Polishing of the household and fancy glass with a diamond skives on organic binders
-
(At the enterprises and institutes)
-
It was found that the use of a new MB1 organic bond with a 45/38 micron grinding powder instead of an M2-01 bond with a 30/40 micron micropowder made it possible to increase the productivity of the final ...
-
24.
Control of molding compounds for abrasive tool from silicon carbide and electrocorundum micropowders on a ceramic binder
-
(At the enterprises and institutes)
-
The possibility of using a small-sized device VIMS-1 for measuring the electrophysical properties of molding abrasive masses from micropowders in the development of formulations of abrasive tools and for ...
-
25.
Abrasive tool made of SiC micropowders on a ceramic binder
-
(At the enterprises and institutes)
-
The processes occurring in micro-grinding silicon carbide powders during the firing of abrasive products are considered, and the effect of the particle size distribution of powders on the properties of ...
-
26.
The effect of electric activation of the liquid-glass binder on the sand blend quality
-
(At the enterprises and institutes)
-
The results of electrical treatment of liquid glass in a special electrolyzer are presented, as a result of which the fluidity of liquid silicate increases more than 2 times practically without changing ...
-
27.
Low-melting crystallizable boron-phosphate glass binders
-
(Science for glass production)
-
Glass-crystalline materials have been obtained and tested, which can be used as sitallizing bonds for abrasive tools with a heat treatment temperature of 650 ° C. Their basic physical and chemical properties ...
-
28.
Composite heat-insulating materials based on a ceramic-forming organosilicon binder
-
(Science for ceramic production)
-
The possibility of using hollow ceramic microspheres and an organosilicon binder with silane and carbosilane bonds to obtain heat-resistant heat-insulating ceramic foam materials for structural purposes ...
-
29.
Wollastonite: a component of ceramic binder for abrasive tool
-
(Abrasives)
-
The results of studying wollastonite as a raw material for ceramic bonds of abrasive tools are presented. It was found that wollastonite can be used as a flux. The possibility of regulating the properties ...
-
30.
Dielectric parameters of syntact material based on hollow ceramic microspheres with organosilicon binders
-
(Science for ceramic production)
-
The issues of using flue emissions from thermal power plants - hollow ceramic microspheres - in syntactic materials with increased dielectric characteristics are considered. Comparative dielectric properties ...
-
31.
The effect of binder on the properties of electrocorundum abrasive tool
-
(Science for ceramic production)
-
The influence of the chemical composition of the bond on the properties of the abrasive tool made of electrocorundum is considered. Compositions of ceramic bonds before and after tool firing are analyzed. ...
-
32.
Calculation model of the glass-binder volume fraction in the abrasive ceramic tool
-
(Science for ceramic production)
-
A computational model is proposed for the volume fraction of a glass bond in an abrasive ceramic tool, according to which glass interlayers between abrasive grains are composed of spherical particles, ...
-
33.
Film heaters having phosphate binder-based conductive coatings
-
(Coatings. Enamels.)
-
Conductive coatings have been developed that are formed on an enamelled steel substrate at low temperatures (560 - 580 ° C), which have good performance characteristics. Heating devices for both household ...
-
34.
The use of alumazane oligomer as a binder in production of alumonitride ceramics
-
(Science for ceramic production)
-
It is shown that alumosane oligomers can be used as a binder and plasticizer to obtain aluminum nitride articles by the method of semi-dry pressing. This makes it possible to simplify the technology of ...
-
35.
Setting of binder composition for abrasive electrocorundum instrument
-
(Science for ceramic production)
-
The properties of ceramic bonds used in the production of electrocorundum abrasive tools are given. Methods for studying the properties of ceramic bonds are considered, including methods that make it possible ...
-
36.
Coatings developed on the base of phosphate binders
-
(Coatings)
-
Hydroxyapatite coatings based on phosphate binders were obtained. The adhesive characteristics of the coatings were investigated, their TCLE and the effect of temperature on the strength of the coating ...
-
37.
Correlation of the properties of siloxane binder-based compositional materials with the nature of filler
-
(Science for ceramic production)
-
The sol-gel method was used to obtain composite ceramic materials based on a siloxane binder and fine powders of refractory fillers (based on various borides, nitrides and carbides), which do not require ...
-
38.
Reinforced ceramic materals with phosphate binders
-
(Science for ceramic production)
-
The possibility of reinforcing ceramic materials based on zirconium dioxide and phosphate binders has been investigated. The effect on the flexural strength of the pressing pressure, the S / L ratio, the ...
-
39.
DEVELOPMENT OF NANOMODIFIED CEMENT USING MICROSILICA, POLYCARBOXYLATE AND DUNE SAND: OPTIMIZATION OF COMPOSITION AND STRENGTH CHARACTERISTICS
-
(Not-set)
-
... composition and technological parameters providing increased strength and performance properties of the binder were studied. A series of cement systems with varying clinker and sand content was prepared, ...
-
40.
INVESTIGATION OF THE EFFECT OF MECHANOACTIVATION OF LOCAL RAW MATERIALS ON THE STRENGTH PROPERTIES OF SULFURE CONCRETE
-
(Not-set)
-
... conditions of the North and the Arctic. The use of methods of mechanical activation of mineral fillers of sulfur binder allows the use of substandard mineral raw materials in the technologies of sulfur ...
