-
1.
APPLICATION OF SOL-GEL TECHNIQUE FOR SYNTHESIS OF NANOSTRUCTURED PIEZOELECTRIC MATERIALS IN LEAD ZIRCONATE-TITANATE SYSTEM – A REVIEW. PART 2. SYNTHESIS OF FILM AND ROD STRUCTURES
-
(Not-set)
-
In the present study, we review current progress in sol-gel techniques for synthesis of ferroelectric powders, thin films and rods in lead zirconate-titanate system, as well as methods for obtaining controlled ...
-
2.
MORPHOLOGY AND OPTICAL PROPERTIES OF AMORPHOUS THIN FILMS (InSe)x(GaSe)100–x
-
(Not-set)
-
Phase and elemental analysis were performed for amorphous nanosized thin films of (InSe)20(GaSe)80 and (InSe)50(GaSe)50 compositions, and surface morphology studies were conducted. Optical transmission ...
-
3.
FABRICATION A NEW FILM SCINTILLATOR BASED ON (8-HYDROXYQINOLATE) LITHIUM
-
(Not-set)
-
Thin luminescent films of the organometallic complex of lithium 8-hydroxyquinolate (Liq) on glass substrates were fabricated by capillary deposition and lithography. A study of the spectral-luminescent ...
-
4.
PRODUCTION OF MICRONEEDLE ZIRCONIUM DIOXIDE POWDER STABILIZED BY ITTRIUM AND CERIUM
-
(Not-set)
-
The process of obtaining microneedle powdered ZrO2 from an aqueous solution of zirconium oxychloride, as well as zirconium dioxide doped with Y2O3 and CeO2 oxides, has been studied. Their chemical and ...
-
5.
SYNTHESIS AND THERMAL PROPERTIES OF TUNGSTEN SILICATE COMPLEXES WITH HEXAMETHYLENETETRAMINE
-
(Not-set)
-
Previously unknown in the literature, complexes of hexamethylenetetramine (HMTA) with tungsten silicates of the composition Rb5[SiW11O39Fe(HMTA)]?20H2O, Cs5[SiW11O39Fe(HMTA)]?6H2O, Rb6[SiW11O39Zn(HMTA)]?12H2O, ...
-
6.
SYNTHESIS AND ELECTROPHYSICAL PROPERTIES OF CERAMIC SAMPLES OF SOLID SOLUTIONS OF THE (1 – x)BiFeO3–xBa(Ti1 – ySny)O3 SYSTEM
-
(Not-set)
-
The results of solid-phase synthesis of ceramic samples of a new system(1 – x)BiFeO3–xBa(Ti1 – ySny)O3 (x = 0…0,40, y = 0,05; 0,10) are presented. X-ray phase analysis confirmed that the synthesized samples ...
-
7.
CONDUCTIVE PASTES FOR LOW TEMPERATURE CO-FIRED CERAMICS – A REVIEW
-
(Not-set)
-
This article presents a review of the available scientific and technical information on conductive metallization pastes used in the production by low-temperature co-fired ceramic (LTCC) multilayer electronic ...
-
8.
LTCC-RESISTORS
-
(Not-set)
-
In this paper the experience of using regular and specially developed resistive pastes for resistors compatible with LTCC substrates is reviewed. Characteristics of surface, buried, and 3D resistors manufactured ...
-
9.
ULTRA-SOFT X-RAY SPECTROSCOPY STUDY OF CHROMIUM-DOPED TITANIUM CALCIUM-COPPER CaCu3Ti4O12
-
(Not-set)
-
A series of chromium-containing solid solutions CaCu3Ti4 – 4хСr4хO12 – ? (sp. gr. Im3) were obtained by the solid-phase synthesis method. The unit cell parameter of the solid solutions changed insignificantly ...
-
10.
GLASS-CERAMIC FERROELECTRIC COMPOSITE MATERIAL BASED ON LOW-ALKALI ALUMINOBOROSILICATE GLASS AND BaTiO3
-
(Not-set)
-
Using the sintering method near the softening temperature of the glass employed, glass-ceramic composites consisting of low-alkali aluminoborosilicate glass and barium titanate mixed in various proportions ...
-
11.
LASER MODIFICATION OF GAS-THERMAL COATINGS SPRAYED BY HVOF – A REVIEW
-
(Not-set)
-
An overview of the research results on the laser modification of coatings sprayed by HVOF is presented. The review includes information on laser post-treatment of mainly on tungsten carbide-based coatings. ...
-
12.
X-RAY PHOTOELECTRON SPECTROSCOPY OF Bi2Ni1/2Co1/2Ta2O9 ± ? OXIDE CERAMICS
-
(Not-set)
-
Cubic pyrochlore of the composition Bi2Ni1/2Co1/2Ta2O9 ± ? (sp. gr. Fd-3m, a = 10.5261(8) ?) was synthesized for the first time from the corresponding oxides by the solid-phase reaction method. The complex ...
-
13.
MECHANOCHEMICAL SYNTHESIS OF CuO/ZnO/Al2O3 OXIDE COMPOSITE FOR CATALYTIC SYSTEMS
-
(Not-set)
-
The paper investigates the process of “soft” mechanochemical synthesis of the CuO/ZnO/Al2O3 composite using copper/zinc hydroxocarbonates and aluminum oxide as feedstock. Using the methods of X-ray phase ...
-
14.
SYNTHESIS OF TITANIUM OXIDE POWDERS FROM VARIOUS TITANIUM SALTS AND STUDY OF ITS PROPERTIES
-
(Not-set)
-
In this work, a number of titanium oxide powders with different crystal structures and textural characteristics were synthesized. The initial raw materials were metallic titanium and rutile (rutile particle ...
-
15.
FEATURES OF THE SYNTHESIS OF CERAMIC PARANIOBATE OF COMPOSITION YErYbNbO7
-
(Not-set)
-
The results of the synthesis of complex paraniobate of the composition YErYbNbO7 using various methods are presented. The chemical composition of the final synthesis products is determined. The features ...
-
16.
CERAMICS WITH ULTRAHIGH PERMITTIVITY VALUES: COMPOSITIONS, SYNTHESIS METHODS AND PROPERTIES AT LOW AND MEDIUM FREQUENCIES
-
(Not-set)
-
An overview of dielectric materials with high (more than 10 000) values of relative permittivity is presented. Most of the compositions of these materials are based on systems that include ferroelectric ...
-
17.
APPLICATION OF SOL-GEL TECHNIQUE FOR SYNTHESIS OF NANOSTRUCTURED PIEZOELECTRIC MATERIALS IN LEAD ZIRCONATE-TITANATE SYSTEM – A REVIEW. PART 1. POWDERS SYNTHESIS
-
(Not-set)
-
In the present study, we presented a review progress in sol-gel method for the synthesis of powders of ferroelectric ceramics of the PbTiO3–PbZrO3 system, based on the controlled hydrolysis of mixtures ...
-
18.
SYNTHESIS AND STUDY OF THE OPTICAL AND SPECTRAL-LUMINESCENT PROPERTIES OF LuAG:Ce CERAMICS
-
(Not-set)
-
In this study, LuAG:Ce ceramic powders with compositions of Lu2.98Ce0.02Al5O12 and Lu2.93Ce0.07Al5O12 were synthesized using chemical precipitation. Luminescent ceramic samples were then produced from ...
-
19.
MIDDLE RANGE ORDER IN GLASSES OF La2O3–Nb2O5–B2O3 AND BaO–Nb2O5–P2O5 SYSTEMS ACCORDING TO X-RAY TOTAL SCATTERING
-
(Not-set)
-
We have obtained the X-ray total scattering patterns at wavelength 0.20735 ? and corresponding to them radial distribution functions (RDF) of electron density for glasses in the La2O3–Nb2O5–B2O3 and BaO–Nb2O5–P2O5 ...
-
20.
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
-
(Not-set)
-
The functional ceramic materials are broadly used in the electronic industry. Many of them are comprised of ferroelectric materials because of their outstanding piezoelectric and dielectric properties. ...