-
41.
GLASS-LIKE CARBON FROM SUPERCRITICAL FLUID IN THE C–O–H SYSTEM AT TEMPERATURE 800 ?C AND PRESSURE 500…1000 ATM
-
(Not-set)
-
The paper presents the results of experimental modeling of glass-like carbon synthesis from high pressure supercritical fluid in the C–O–H system at temperature 800 °C and pressure 500…1000 atm. A full ...
-
42.
PRODUCTION OF POROUS CERAMICS ?-Al2O3–3YSZ WITH ADDITIVE OF ?(?)-Al2O3
-
(Not-set)
-
Porous ?-Al2O3–3YSZ ceramics were fabricated using slip casting, incorporating 15 wt. % submicron Al2O3 powders as sintering additives. These orders were synthesized via solution combustion synthesis using ...
-
43.
MEASUREMENT OF CHROMATIC BIREFRINGENCE DISPERSION OF PHASE PLATES, INSCRIBED IN GLASSES BY FEMTOSECOND PULSES
-
(Not-set)
-
... In this work, phase plates were written in the volume of silica and nanoporous glasses using a laser beam, and for the first time, chromatic dispersion curves of birefringence were measured for them using ...
-
44.
PRODUCTION OF GLASS-LIKE CARBON BY HIGH-ENERGY LASER TREATMENT ON A COAL TARGET
-
(Not-set)
-
Preliminary results of experimental modeling of impact process on coal substance by short-pulse laser radiation are presented. During the experiments extremely high temperatures and pressures have been ...
-
45.
POROUS CERAMIC SUBSTRATES FOR THE STUDY OF BIOLOGICAL OBJECTS BY ELECTRON MICROSCOPY
-
(Not-set)
-
... for sample preparation of biological samples with the use of metal spraying or the introduction of ionic liquid. This technique, together with the filtering porous material and the technical capabilities ...
-
46.
INFLUENCE OF REFRACTORY FILLERS ON THE PROPERTIES OF CERAMICS BASED ON HIGH CONCENTRATED SILICA GLASS SUSPENSIONS
-
(Not-set)
-
Refractory and heat-resistant materials with a coarse-grained and large-porous structure were obtained using silica glass suspensions with mullite, spinel, corundum and quartz fillers. The influence of ...
-
47.
CHARACTERISTICS OF GLASSES IN PRODUCTS OF EXPERIMENTAL MODELING OF IMPACT MELTS
-
(Not-set)
-
The transformation of substances under extremely high pressures and temperatures is an actual direction both in the field of solid state physics and materials science, and for natural objects. Among the ...
-
48.
PROPERTIES OF HOLLOW GLASS MICROSPHERES PRODUCED IN A PROPANE-AIR FLARE
-
(Not-set)
-
Hollow glass microspheres from sodium borosilicate glass were obtained by high-temperature method, the composition of mass%: 10 Na2O; 8 CaO; 0,3 MgO; 0,2 Al2O3; 9 B2O3; 0,5 SO3; 72 SiO2. It is established ...
-
49.
INFLUENCE OF THE MINERALOGICAL COMPOSITION OF CLAYS ON THE CAPILLARY-POROUS STRUCTURE AND FROST RESISTANCE OF CERAMIC BRICKS
-
(Not-set)
-
The influence of the mineralogical composition of clays on the microstructure and frost resistance of ceramic bricks has been studied. The pore radii were calculated by the method of capillary water saturation ...
-
50.
SINTERING CHARACTERISTICS AND THERMAL PROPERTIES OF POROUS CERAMICS BASED ON HYDROPHLOGOPITE AND REFRACTORY CLAYS
-
(Not-set)
-
... kaolin clays, which differ both in plasticity and in fire resistance. To create a porous structure of the material, a method was used to introduce a porous filler in the form of swollen hydromica developed ...
