-
1.
SINTERING CHARACTERISTICS AND THERMAL PROPERTIES OF POROUS CERAMICS BASED ON HYDROPHLOGOPITE AND REFRACTORY CLAYS
-
(Not-set)
-
The results of research on the development of compositions of ceramic masses for obtaining effective heat-insulating materials and products are presented. The materials were obtained by pressing using ...
-
2.
Preparation of Highly Porous Materials Based on Refractory Clays
-
(Not-set)
-
Made porous ceramics based on clay and non-plastic aluminosilicate raw materials of Uzbekistan by slip casting. Molding was carried out using a blowing agent - technical foam and sawdust, stabilizing the ...
-
3.
Synthesis of refractory clay based pigments for volume dyeing
-
(Science for ceramic production)
-
The results of a study of the possibility of volumetric coloring of slab masses by the method of clay impregnation with solutions of salts of 3d elements (Ni, Co, Cr, Fe), which makes it possible to obtain ...
-
4.
Refractory clays of Toretskoe deposit
-
(Raw materials)
-
Refractory clays of the Toretskoye deposit (Donetsk region) are described. These clays are white-burning and can be used in the production of high-quality porcelain and ceramics for various purposes. Il. ...
-
5.
Special features of phase formation in refractory clays in presence of topaz
-
(Science for ceramic production)
-
-
6.
Sintering of the fireclay-kaolin mass with a refractory clay
-
(Science for ceramic production)
-
It is shown that, to intensify the sintering of chamotte-kaolin masses, refractory easily sintered plastic clays should be replaced with refractory clay. Recommendations are given on the choice of the ...
-
7.
DEVELOPMENT OF HIGH-TEMPERATURE THERMAL INSULATION MATERIAL BASED ON CLAY FROM THE KORNILOVSKY DEPOSIT IN THE TOMSK REGION
-
(Not-set)
-
... The physico-chemical properties of clay have been determined. The physical and technical properties of heat-insulating refractory products based on the white-burning clay of the Kornilovsky deposit have ...
-
8.
RESEARCH OF THE DEPENDENCE OF THE THERMAL STRENGTH PROPERTIES OF REFRACTORY MATERIALS OF THE LADLE LINING OF THE FERROALLOY PRODUCTION ON TEMPERATURE
-
(Not-set)
-
The article is devoted to the study of the dependence of the change in compressive strength on temperature for refractory materials of the lining of a pouring ladle of ferroalloy production – fireclay ...
-
9.
PROSPECTS OF USING CLAYEY RAW MATERIALS OF THE STOLINSKIE KHUTORA DEPOSIT FOR PRODUCING BUILDING CERAMICS
-
(Not-set)
-
... that the clay is refractory, highly plastic, semi-acidic or acidic (depending on the depth), with a high or medium content of coloring oxides, coarsely dispersed, unsinterable in the firing temperature ...
-
10.
INFLUENCE OF REFRACTORY FILLERS ON THE PROPERTIES OF CERAMICS BASED ON HIGH CONCENTRATED SILICA GLASS SUSPENSIONS
-
(Not-set)
-
Refractory and heat-resistant materials with a coarse-grained and large-porous structure were obtained using silica glass suspensions with mullite, spinel, corundum and quartz fillers. The influence of ...
-
11.
RESEARCH OF CERAMIC PROPERTIES OF CLAY OF THE ORENBURG REGION
-
(Not-set)
-
The project is devoted to the study of the ceramic properties of the Orenburg region clay in order to determine the fields of its application in industry. Mineral, chemical, disperse compositions, as well ...
-
12.
BRUCITE-CONTAINING WASTE FROM THE PRODUCTION OF REFRACTORY MATERIALS IN WASTEWATER TREATMENT PROCESSES
-
(Not-set)
-
As part of the study, an assessment was made of the possibility of using magnesium-containing waste from the production of periclase in the processes of engineering environmental protection. Evaluation ...
-
13.
WOLLASTONITE CERAMICS FROM CHALK AND DIATOMITE FOR REFRACTORY INSULATION
-
(Not-set)
-
Wollastonite ceramics was obtained from chalk and diatomite by the method of solid-phase synthesis of components. The influence of charge composition, modes of its mechanochemical activation and temperature-time ...
-
14.
SINTERING PROCESSES AND SOLID-PHASE REACTIONS IN THE TRIPLE COMPOSITION “QUARTZITE–CLAY–ADDITIVES”
-
(Not-set)
-
... limestone for obtaining unshaped dinas refractory materials. It was found that as a result of these processes, chemical interaction occurs both with the help of solid-phase reactions and with the participation ...
-
15.
Study of the Influence of Nanotechnogenic Raw Materials and Pyrophyllite on Orientation of Clay Particles and Water Permeability of Acid Resistant Materials
-
(Not-set)
-
The use of nanotechnogenic aluminum-containing raw materials and pyrophyllite in the compositions of ceramic masses for the production of acid-resistant materials helps to reduce the shrinkage anisotropy ...
-
16.
Characteristics of Kaolin Clay Deposits of the Svetlinsky District of the Orenburg Region
-
(Not-set)
-
The object of the study was kaolin mineral raw materials from the Svetlinsky district of the Orenburg region. The characteristics of the clay were obtained by using the methods of particle size distribution, ...
-
17.
Research of Mullitization Processes in Floated Materials on the Basis of Kaolinite Clay and Waste
-
(Not-set)
-
The results of research on the production of fused materials based on kaolinite clay and high-alumina waste using a concentrated radiant flux are presented. The phase composition, microstructure, and elemental ...
-
18.
A Comprehensive Evaluation of the Effect of Mineralogical Composition of Clays and Component from Porous Glass on the Thermal Conductivity and Frost Resistance Heat-Efficient Wall Ceramics
-
(Science for ceramic production)
-
The results of studies of the porosity of heat-efficient ceramic materials based on clays of various mineralogical composition with a glass-porous component (SPC) and their effect on frost resistance and ...
-
19.
Phase composition in core-shell transition layer in matrix structure of construction ceramics made from lean raw materials with clay addition
-
(Science for ceramic production)
-
The process of the proposed technology for the formation of a transition layer between the dispersion medium and the dispersed phase of a ceramic matrix composite is investigated, and a technique for the ...
-
20.
Influence of SiO2/Al2O3 ratio on structure, properties and heat resistance of geo-polymer refractory materials
-
(At the enterprises and institutes)
-
A study of the properties of lightweight geopolymer materials (GM) based on refractory technogenic waste of aluminosilicates has been carried out. The effect of the ratio of oxides SiO 2 and Al 2 O ...