-
1.
METHODS OF SYNTHESIS OF STARTING MATERIALS FOR CERAMICS BASED ON LANTHANUM CHROMITE (REVIEW)
-
(Not-set)
-
The review article examines classical and rarely used methods for synthesizing ceramic materials based on lanthanum chromite.
-
2.
ALUMINOBOROSILICATE GLASS FOR VITRIFICATION OF PERLITE-CONTAINING MATERIALS
-
(Not-set)
-
The aluminoborosilicate glass of basic composition was tested for the perlite-containing materials syntheses. The influence of the proportion of perlite filter powder in the initial mixture on the composition, ...
-
3.
SYNTHESIS AND ELECTROPHYSICAL PROPERTIES OF CERAMIC SAMPLES OF SOLID SOLUTIONS OF THE (1 – x)BiFeO3–xBa(Ti1 – ySny)O3 SYSTEM
-
(Not-set)
-
The results of solid-phase synthesis of ceramic samples of a new system(1 – x)BiFeO3–xBa(Ti1 – ySny)O3 (x = 0…0,40, y = 0,05; 0,10) are presented. X-ray phase analysis confirmed that the synthesized samples ...
-
4.
STUDY OF THE INFLUENCE OF DIFFERENT TEMPORARY TECHNOLOGICAL BINDERS ON CERAMICS VK94-1
-
(Not-set)
-
This paper describes the process of obtaining VK94-1 ceramics with various TTB (temporary technological bonds) in order to assess the effect of the binder on properties such as apparent density, total ...
-
5.
POROUS STRUCTURE OF A COMPOSITE MATERIAL BASED ON CORUNDUM AND GLASS
-
(Not-set)
-
A composite material obtained by ceramic technology from electrofused corundum and finely dispersed glass is used to simulate the formation of the pore space of a porous ceramic material. According to ...
-
6.
ON HIGH-TECH APPLICATIONS OF ZIRCONIUM DIOXIDE, PARTIALLY STABILIZED WITH YTTRIUM OXIDE (REVIEW)
-
(Not-set)
-
An overview of the applications of zirconium dioxide, partially stabilized with yttrium oxide, in various high-tech fields is presented. Particular attention is paid to its use in supercapacitors, where ...
-
7.
STABILIZATION OF THE FERROELECTRIC PHASE IN PbZrO3 CERAMICS WITH THE ADDING OF BaTiO3 NANOPARTICLES
-
(Not-set)
-
Presents the results of a study of PbZrO3 ceramics synthesized from nanodispersed PbO and ZrO2 powders with the addition of BaTiO3 nanoparticles with sizes of 50, 200 and 400 nm. It has been established ...
-
8.
COMPREHENSIVE STUDY OF THE BARKHAN SANDS OF THE KUSHKUPYR DEPOSIT FOR THE PRODUCTION OF SODIUM SILICATE IN THE MICROSILICA–BARKHAN SAND–CAUSTIC SODA SYSTEM
-
(Not-set)
-
The chemical and mineralogical composition, grain structure and physicochemical properties of unenriched dune sands located in the Kushkupyr district of Uzbekistan were studied. Analysis of the granulometric ...
-
9.
THE STUDY OF CERIUM DIOXIDE POWDER OBTAINED BY REVERSE DEPOSITION METHOD
-
(Not-set)
-
The processes of powder production of CeO2 by reverse deposition are investigated. The CeO2 content in the resulting products is 99.2 % by weight. The main phase is cerium dioxide with a cubic lattice. ...
-
10.
CURRENT STATE AND PROSPECTS OF CERAMIC MEMBRANE MARKET DEVELOPMENT (REVIEW)
-
(Not-set)
-
Using the methodology of system analysis, the paper analyzes the growth prospects of ceramic membranes, market volume and value, as well as the prevailing commercial trends in the industry by the most ...
-
11.
MECHANOCHEMICAL SYNTHESIS OF CuO/ZnO/Al2O3 OXIDE COMPOSITE FOR CATALYTIC SYSTEMS
-
(Not-set)
-
The paper investigates the process of “soft” mechanochemical synthesis of the CuO/ZnO/Al2O3 composite using copper/zinc hydroxocarbonates and aluminum oxide as feedstock. Using the methods of X-ray phase ...
-
12.
PREPARATION OF A COMPOSITE BASED ON HOLLOW GLASS MICROSPHERES MODIFIED WITH SILVER NANOPARTICLES
-
(Not-set)
-
Composite materials based on K 25 hollow glass microspheres were obtained by modifying them with silver nanoparticles obtained by an environmentally friendly “green” method using an aqueous plant extract ...
-
13.
STRUCTURE AND OPTICAL PROPERTIES OF SOLID SOLUTIONS OF THE ZrO2–Sc2O3 SYSTEM OBTAINED BY CO-PRECIPITATION
-
(Not-set)
-
The structure of ZrO2–Sc2O3 powders in the composition range from 1 to 15 mol. % Sc2O3 with the addition of 0.1 mol. % Eu2O3 as a spectroscopic probe, obtained by the coprecipitation method and heat-treated ...
-
14.
CERAMIC COMPOSITE MATERIALS IN THE Ca2P2O7–Ca3(PO4)2 SYSTEM BASED ON POWDER MIXTURES INCLUDING CALCIUM PHOSPHATE OF NATURAL ORIGIN AND MONOCALCIUM PHOSPHATE MONOHYDRATE
-
(Not-set)
-
Ceramics in the Ca2P2O7–Ca3(PO4)2 system were obtained from powder mixtures containing calcium hydroxyapatite Са10(РО4)6(ОН)2 of natural origin and monocalcium phosphate monohydrate Ca(H2PO4)2·H2O. Fish ...
-
15.
FORMATION OF THE INLET FUNNEL IN THE CHANNELS OF MICROCHANNEL PLATES
-
(Not-set)
-
A method has been developed for one-sided etching of the inlet openings of channels of non-etched blanks of microchannel plates in dilute hydrofluoric acid. Blanks of microchannel plates MCP 18-10 were ...
-
16.
STRUCTURAL FEATURES AND PROPERTIES OF SODIUM-RUBIDIUM ALUMINOBOROSILICATE GLASSES WITH THE ZIRCONIUM ADDITION
-
(Not-set)
-
The structure of matrix materials synthesized quenching sodium-rubidium aluminoborosilicate melts with the zirconium addition was studied using vibrational spectroscopy. The significant influence of zirconium ...
-
17.
SYNTHESIS OF NANOCRYSTALINE Bi2Cr0.5Co0.5Nb2O9+? CERAMICS
-
(Not-set)
-
It has been shown that the modified sol-gel method (method Pechini) successfully synthesizes multielement oxides based on bismuth niobate, crystallizing in the pyrochlore structure type (space group Fd-3m). ...
-
18.
THE INFLUENCE OF THE ADDITION OF SLAG WASTE FROM THE NOVOCHERKASSK SDPP ON THE PROPERTIES OF ALUMINOSILICATE MATERIALS BASED ON DRILL WASTES FROM THE VOSTOCHNO-CHUMAKOVSKOYE OIL ...
-
(Not-set)
-
The essence of the method of horizontal drilling using hydraulic fracturing is described. The influence of drill wastes and coal combustion waste on the environment is shown. A number of physical and chemical ...
-
19.
APPLICATION OF SOL-GEL TECHNIQUE FOR SYNTHESIS OF NANOSTRUCTURED PIEZOELECTRIC MATERIALS IN LEAD ZIRCONATE-TITANATE SYSTEM – A REVIEW. PART 2. SYNTHESIS OF FILM AND ROD STRUCTURES
-
(Not-set)
-
In the present study, we review current progress in sol-gel techniques for synthesis of ferroelectric powders, thin films and rods in lead zirconate-titanate system, as well as methods for obtaining controlled ...
-
20.
SYNTHESIS OF EFFECTIVE SILICATE MATERIALS BASED ON WASTE FROM THE ENERGY INDUSTRY
-
(Not-set)
-
Describes a method for determining the physico-mechanical properties of a synthesized batch of propants. Industrial waste is one of the sources of anthropogenic impact on the environment on a global scale, ...
