-
1.
Formers for Cellular Glass on the Basis of Ash and Slag Materials of TPP
-
(Not-set)
-
A number of charge compositions with anthracite as the main blowing agent have been developed. The density and strength of the synthesized samples have been determined. The process of formation of a cellular ...
-
2.
Cellular Glass on the Basis of Half-Glass Waste for the Production of Energy-Efficient Threelayer Construction Panels
-
(Utilization of waste)
-
Technologies have been developed for the manufacture of slabs and porous aggregate from cellular glass based on ash and slag waste from Novocherkasskaya SDPP, as well as structural and heat-insulating ...
-
3.
Compositions and technological parameters for synthesis of cellular insulator construction glass materials with tailored density
-
(RESOURCE SAVING)
-
... The analysis of the influence of the type and amount of pore-forming agents on the structure and properties of cellular heat-insulating building glass material is carried out.
Compositions, technological ...
-
4.
Slip technology of high-porous cellular material production from glass
-
(Science for glass production)
-
The possibility of using slip technology in the production of highly porous cellular materials from aluminoborosilicate glass is shown. The factors influencing the rheology and stability of the slip system, ...
-
5.
High-porous cellular materials based on alkali alumoborosilicate glass
-
(Science for glass production)
-
A method of obtaining a highly porous cellular material based on glass of an alkaline aluminoborosilicate system by the method of burnout additives is considered, one of the varieties of which is the burning ...
-
6.
DEVELOPMENT OF TECHNOLOGY FOR THE SYNTHESIS OF HEAT-INSULATING GLASS-CRYSTALLINE MATERIALS BASED ON DRILLING MUD BY HYDRATE FOAMING
-
(Not-set)
-
This paper presents a study of the possibility of synthesizing a thermal insulation material, sludge, based on oil production drilling waste. Samples of drilling mud were collected at the Komsomolskoye ...
-
7.
STUDY OF THE POSSIBILITY OF A STABLE INCREASE IN THE CURRENT DENSITY OF AN ELECTRON BEAM USING A TAPERED GLASS CHANNEL
-
(Not-set)
-
The possibility of increasing the current density of a beam of charged particles (“focusing”) using tapered glass channels without involving external energy sources is currently being actively implemented ...
-
8.
INFLUENCE OF REFRACTORY FILLERS ON THE PROPERTIES OF CERAMICS BASED ON HIGH CONCENTRATED SILICA GLASS SUSPENSIONS
-
(Not-set)
-
Refractory and heat-resistant materials with a coarse-grained and large-porous structure were obtained using silica glass suspensions with mullite, spinel, corundum and quartz fillers. The influence of ...
-
9.
INFLUENCE OF LIQUID FOAMING AGENT DISTRIBUTION ON THE FORMATION OF FOAM GLASS POROUS STRUCTURE
-
(Not-set)
-
It was shown that the use of liquid-phase foaming agents is promising for the synthesis of foam glass. The dynamics of the change in the glass particles size in the process of batch obtaining was studied. ...
-
10.
Physico-Mechanical and Electrophysical Properties of Porous Glass Composites with Silicon Carbide Additives
-
(Not-set)
-
The influence of silicon carbide (10 & # 8211; 40 & # 37; by mass) on the physical-mechanical and electro-physical characteristics of composites is considered. The effect of the additive on the radio absorption ...
-
11.
Bulk Processing of Industrial Waste into Foam Glass Materials
-
(Not-set)
-
An overview of research in the field of utilization of large-scale industrial waste in the production of granular and block foam materials is presented. The possibilities and prospects of obtaining materials ...
-
12.
Foam Glass Synthesis by a Hydrate Method Based on Various Natural Materials
-
(Not-set)
-
A number of charge compositions have been developed on the basis of quartz sand of the Chalgan deposit, gaize of the Botchinsky deposit, slag of the Artemovskaya TPP and diatomite of the Chernoyarsk deposit. ...
-
13.
Physical and Chemical Researches of Raw Materials of the Far East of Russia for Synthesis on Their Basis of Foam Glass and Protective Enamel Coatings
-
(Raw materials)
-
Investigations of the physicochemical properties of silica-containing raw materials from the Russian Far East, suitable for the synthesis of foam glass and protective enamel coatings for oil and gas pipelines, ...
-
14.
Foam Glass and Foam Materials Based on the Ash and Slag Waste of Thermal Power Plants (Review)
-
(Utilization of waste)
-
An overview of domestic and foreign studies on the use of ash and slag waste from thermal power plants as raw materials in the production of foam glasses and glass-crystalline foams is presented. It is ...
-
15.
Optimised grain particle size composition for foam-glass materials production based on Chernoyarskoe deposit diatomite
-
(Science for glass production)
-
The types and purpose of foam glass are considered, depending on the used blowing agents. Compositions with different granulometric composition of the charge have been developed, and heat treatment has ...
-
16.
Structure formation in foam-glass made of Novocherkassk GRES ash and slag waste
-
(Utilization of waste)
-
Compositions and technological parameters of the synthesis of cellular glass based on ash and slag waste from the Novocherkasskaya SDPP (heat-insulating layer of a multilayer silicate composite heat-insulating ...
-
17.
Glass-foam coating effect on its high-frequency electromagnetic radiation absorptivity
-
(Coatings)
-
The influence of a modified coating applied to the surface of foam glass on the ability to absorb electromagnetic radiation in the high-frequency range is considered. It was found that the coating obtained ...
-
18.
The use of computer-aided technologies in foamglass pore structure formation modeling
-
(Science for glass and ceramic production)
-
Optimal compositions for the synthesis of foam glass with the use of slag waste from thermal power plants have been developed? foam slag glass. Based on the experimental data, a program has been created ...
-
19.
Cell heat-insulating construction glassmaterials made with steam power stations and iron industry waste
-
(Utilization of waste)
-
The physicochemical processes of the formation of the cellular structure of heat-insulating building glass materials as a result of thermoplastic sintering of the charge at a temperature of 600? 870? C. ...
-
20.
Composite silver-containing iodine sorptive media based on high porous cellular ceramics
-
(Environmental protection)
-
A method is presented for obtaining silver-containing iodine sorbents by applying silver to porous cellular ceramics by chemical reduction from a solution and then converting it into an oxidized form. ...