-
1.
Properties of large-scale boron nitride-based bodies for super-hard composites
-
(Science for ceramic production)
-
A composite based on polycrystalline cubic boron nitride with a refractory binder, characterized by a high degree of phase distribution homogeneity, was obtained by thermobaric treatment in a cubic press ...
-
2.
Boron nitride for microcompositional ceramic obtained by proton-carbon treatment
-
(Science for ceramic production)
-
The possibility of obtaining by low-temperature proton-carbon treatment of wurtzite-like boron nitride with a microcomposite structure in the form of nanotube packages has been studied. It is shown that ...
-
3.
Boron Nitride-Based Ceramics Obtained by Reaction-Sintering
-
(Science for ceramic production)
-
The reaction sintering of ceramics based on hexagonal boron nitride is investigated. It was found that the use of pre-sintered and then ground to a particle size of 45 - 125 ?m aluminum nitride is much ...
-
4.
PHYSICO-MECHANICAL PROPERTIES OF BORON COATINGS DEPOSITED IN AN ATMOSPHERE OF VARIOUS GASES BY AN ELECTRON BEAM IN A FOREVACUUM
-
(Not-set)
-
The paper presents the results on the formation of boron-based coatings by precipitation of target material from a vapor-plasma phase formed by electron beam exposure to a solid-state target in the forevacuum ...
-
5.
Methods for producing ceramics from metal nitrides (a review)
-
(Science for ceramic production)
-
The main methods of obtaining metal nitrides are considered. The main advantages and disadvantages are highlighted for each method. The possibilities of using these materials in various industries are ...
-
6.
Structural features of powder-like nitride-containing materials - the by-products of Al and B combustion
-
(At the enterprises and institutes)
-
The results of a study of the combustion products of aerogels of mixtures of ultrafine aluminum and boron powders in air are presented. Il. 2, bibliography: 12 titles.
-
7.
CALCIUM ZIRCONATE: METHODS OF SYNTHESIS AND APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED THEREON – A REVIEW. PART 2. APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED ON CALCIUM ZIRCONA
-
(Not-set)
-
The publication presents general information about calcium zirconate and the physical/chemical characteristics of products based thereon. The main fields of application of ceramic and refractory materials ...
-
8.
DIELECTRIC PROPERTIES OF CERAMICS BASED ON BN–ZrB2 AND BN–ZrO2 PRODUCED BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS
-
(Not-set)
-
Dielectric properties of ceramic materials based on BN–ZrB2 and BN–ZrO2 systems synthesized in the mode of self-propagating high-temperature synthesis (SHS) from a mixture of boron B powders, boron nitride ...
-
9.
OXIDE-CONTAINING MINERAL FIBERS: TYPES, METHODS OF PRODUCTION, APPLICATION AND MANUFACTURERS (REVIEW)
-
(Not-set)
-
The article provides an overview of mineral oxide fibers of various chemical composition: aluminosilicate, alumina, silica, bio-soluble, zirconium oxide fibers and others. Methods for producing discrete ...
-
10.
Of B2O3 and P2O5 Additives on Silicate and Glass Formation at Srtontium Aluminosilicate Glass Melting
-
(Not-set)
-
the results of studies on reducing the melting temperature of strontium aluminosilicate glass by introducing boron and phosphorus oxides into the charge are presented, the main physicochemical processes ...
-
11.
Super-Hard Composites with a Homogeneous Microstructure and Nanosized Binding Obtained by Reaction Sintering in the cBN?Al?TiC System
-
(Not-set)
-
Experimental results on the synthesis in a cubic apparatus of composites based on diamond-like boron nitride cBN in the cBN-Al-TiC system are presented. It is shown that with an optimal ratio of the number, ...
-
12.
Near-Infrared Raman Spectroscopy of Graphitic B-C-N-Materials
-
(Materials and properties)
-
Raman scattering (RS) studies of graphite-like phases BC x N (g-BC x N) obtained by various methods were carried out using an excitation laser operating in the near infrared range. The most typical ...
-
13.
Chemical Resistance of Liquid Phase-Sintered Materials Based on Si3N4-BN
-
(Materials and properties)
-
Materials based on Si 3 N 4 -BN were obtained by liquid-phase sintering using 20 & # 37; (by volume) YAG as a sintering aid. To obtain composite materials, we used boron nitride powders of hexagonal ...
-
14.
Tribological performance of metal oxide and hybrid composite coatings
-
(Coatings)
-
... alloy with inclusions of dispersed particles of oxides of chromium, aluminum, titanium, zirconium, boron carbide, titanium nitride, diamond, and copper phthalocyaninate is shown. The influence of the nature, ...
-
15.
Formation of polycrystalline diamond structure and phase composition under cobalt infiltration in diamond - hard alloy system
-
(Science for ceramic production)
-
Polycrystalline diamond composites (PCD) were obtained by infiltration of cobalt from a hard-alloy substrate into a porous diamond layer at a temperature of 1600 ° C and a pressure of 6.0 GPa in a cubic ...
-
16.
Nanosized ZrN powder microwave synthesis compared to autoclaving
-
(Science for ceramic production)
-
The synthesis of nanodispersed powders of zirconium nitride ZrN using exothermic reactions initiated by microwave radiation has been studied. The obtained ZrN powders were studied using X-ray phase analysis ...
-
17.
Abrasion resistance of superhard composite materials for highly efficient mining tools production
-
(Science for ceramic production)
-
Bench tests of the abrasion resistance of hard and superhard inserts have been carried out? hard alloy VK8, superhard composites based on cubic boron nitride PCBN and polycrystalline diamond PDC? for the ...
-
18.
Possible applications of super-hard materials and wear-resistant al-loys for rock-cutting tools
-
(At the enterprises and institutes)
-
Provides general information about solid reinforcing materials and steels for rock cutting tools; some problems of efficiency and durability of sintered cermet hard alloys are shown. The possibility of ...
-
19.
Process features of making silicon carbide ceramics by liquid-phase sintering (a review)
-
(Science for ceramic production)
-
The possibility of obtaining ceramics based on silicon carbide by liquid-phase sintering by modifying it with additives of eutectic compositions is considered. It is shown that the synthesized samples ...
-
20.
Improving of protective properties of borosilicate melts through introduction of reducing constituents
-
(Science for glass production)
-
... the melt has been experimentally established. The rate of oxidation of steel 30KhGSA in a melt deoxidized with silicon carbide and silicon nitride, as well as a boron-containing product, has been determined. ...