-
1.
EFFECT OF THE THERMOCHEMICAL STRENGTHENING OF ALUMINOSILICATE GLASS ON THEIR OPTICAL AND MECHANICAL PROPERTIES
-
(Not-set)
-
The processes of thermochemical hardening of aluminosilicate glass are investigated. The glass was processed in a KNO3 melt under industrial and laboratory conditions at 440…480 °C for 1…120 h. The effect ...
-
2.
CERAMIC WASTE AS AN ALTERNATIVE SOURCE OF ALUMINOSILICATE RAW MATERIALS FOR THE PRODUCTION OF PORTLAND CEMENT CLINKER
-
(Not-set)
-
Through comprehensive studies of the chemical and mineralogical composition and technological properties of the wastes of ceramic production of “Kulol” JSC in order to be able to use them as a component ...
-
3.
COMPOSITE MATERIAL BASED ON OXYFLUORIDE BARIUM BOROALUMINOSILICATE GLASS AND Al2O3 FOR LTCC TECHNOLOGY
-
(Not-set)
-
Synthesis and properties data of the ceramic material based on 31.0BaO–30.0B2O3–15.0Al2O3–7.0SiO2–6.8MgO–5.9ZnO–4.3MgF2 (mol. %) glass and Al2O3 as a filler are provided. Sintered at 875 °C composite ceramics ...
-
4.
THE INFLUENCE OF THE ADDITION OF SLAG WASTE FROM THE NOVOCHERKASSK SDPP ON THE PROPERTIES OF ALUMINOSILICATE MATERIALS BASED ON DRILL WASTES FROM THE VOSTOCHNO-CHUMAKOVSKOYE OIL ...
-
(Not-set)
-
The essence of the method of horizontal drilling using hydraulic fracturing is described. The influence of drill wastes and coal combustion waste on the environment is shown. A number of physical and chemical ...
-
5.
TRANSPARENT GLASS-CERAMICS BASED ON LITHIUM ALUMINOSILICATE SYSTEM
-
(Not-set)
-
... after a brief excursion into the history of glass-ceramics, transparent aluminosilicate glass-ceramics are discussed, mainly using the example of the Li2O–Al2O3–SiO2 system, and the areas of their new ...
-
6.
FEMTOSECOND-LASER WELDING OF PHOSPHATE GLASS AND ZING–MAGNESIUM–ALUMINOSILICATE GLASS-CERAMICS
-
(Not-set)
-
The formation of stable connection between materials with different CTE via using femtosecond laser writing is demonstrated. The welding of phosphate glass (CTE = 120?10–7 K–7) to zinc-magnesium-alumosilicate ...
-
7.
FEATURES OF CRYSTALLIZATION OF LITHIUM-ALUMINOSILICATE GLASS MICROSPHERES OBTAINED IN A HIGH-TEMPERATURE PLASMA FLOW
-
(Not-set)
-
The influence of the spheroidization process in the flow of high-temperature plasma of glass based on the Li2O–Al2O3–SiO2 (LAS) system doped with 1.0 mol. % Nd2O3 on its crystallization properties is investigated. ...
-
8.
OBTAINING OF ALKALINE-FREE ALUMINOSILICATE GLASS CERAMICS BY SOL-GEL METHOD AND INVESTIGANING OF ITS PROPERTIES
-
(Not-set)
-
The glass-crystalline ceramic materials in SiO2–Al2O3–RO (RO–MgO, SrO, BaO and their combinations) systems have been synthesized by the sol-gel method. The factors influencing on the sol-gel formation ...
-
9.
Research of the Possibility of Using Light Aluminosilicate Components of Fly Ash for Production of Refractory Insulating Materials
-
(Not-set)
-
A number of refractory heat-insulating ceramic materials were obtained using hollow aluminosilicate fly ash microspheres as a lightweight filler. Thermal insulation products obtained by various methods ...
-
10.
Lightweight Ceramics with Addition of Waste Production of Mineral Wool and Aluminosilicate Cenospheres of Various Fractions
-
(Not-set)
-
A study of the influence of the addition of aluminosilicate cenospheres (ASC) of 2 fractions on the structure and properties of ceramics with waste from the production of mineral wool (MW) was carried ...
-
11.
Influence
of the Type of Carbon-Containing Burn-Out Additive on the Prop-erties
of the Heat-Insulating Aluminosilicate Lightweights
-
(Not-set)
-
... and the increased content of low-melting oxides in the ash activates the sintering process. By the selection of fillers and clay binder, as well as the firing temperature, it is possible to obtain aluminosilicate ...
-
12.
Of B2O3 and P2O5 Additives on Silicate and Glass Formation at Srtontium Aluminosilicate Glass Melting
-
(Not-set)
-
the results of studies on reducing the melting temperature of strontium aluminosilicate glass by introducing boron and phosphorus oxides into the charge are presented, the main physicochemical processes ...
-
13.
Drilling of Porous Aluminosilicate Ceramics
-
(Not-set)
-
The features of laser drilling of composite highly porous ceramics consisting of aluminosilicates, glass and a small addition of polystyrene (EPS) are studied experimentally. It was found that the formation ...
-
14.
Thermally Stable Transparent LithiumAluminosilicate Glass-Ceramics Doped with Neodymium Oxide
-
(Not-set)
-
The effect of Nd 2 O 3 (0.1 - 3.0 & # 37;, molar content) oxide additives on the synthesis conditions, crystallization and spectral properties of heat-resistant sitall of the Li system was studied ...
-
15.
On the Possibility of Precision Control of Thermal Expansion Co-efficient of Transparent Lithium Aluminosilicate Glass-Ceramics
-
(Materials and properties)
-
For sitalls based on the lithium aluminosilicate system, the possibility of precision regulation of the temperature coefficient of linear expansion (TCLE) near values ??approaching zero in the temperature ...
-
16.
Femtosecond Laser-Induced Modification of Transparent Lithium Aluminosilicate Glass-Ceramics and Precursor Glass Containing Antimony
-
(Science for glass production)
-
The features of the action of a femtosecond laser beam on antimony-containing lithium-aluminosilicate glass and glass-ceramic obtained from it by heat treatment with a coefficient of thermal expansion ...
-
17.
Effect of Antimony Oxide Addition on the Crystallization of Lithium Aluminosilicate Glass
-
(Glassceramics)
-
It is shown that the addition of antimony oxide to the composition of the lithium-aluminosilicate glass of the sitall-forming composition makes it possible to suppress the often observed effect of glass ...
-
18.
Effect of Municipal Solid Waste Incineration Fly Ash on Properties, Durability and Environmental Toxicity of Fired Aluminosilicate
-
(Utilization of waste)
-
... manufacture of aluminosilicates, fly ash was introduced into the charge in an amount of 2.5 - 7.5 & # 37;, the firing temperature of the products was 1000 & # 176; C, isothermal holding for 1 hour. Studies ...
-
19.
The Processes of Gelation, Phase Formation and Sintering in the Process of Synthesis by the Sol-Gel Method of Aluminosilicate Glass-Ceramic Modified with Refractory Hafnium and Zirconium Oxides
-
(Glassceramics)
-
The sol-gel method was used to synthesize glass ceramics based on the compositions of the Sr (Ba) - Al 2 O 3 - SiO 2 systems, modified with the addition of zirconium oxides ZrO < sub> 2 and hafnium ...
-
20.
Heat-resistant thermal insulation products based on aluminosilicate fiber experience of usage in the lining of thermal units of ceramic industry
-
(Industrial experience. Energy saving.)
-
The structure and properties of the developed high-alumina products based on aluminosilicate fiber are shown. The application of the developed NK-29 products in the lining of high-temperature thermal units ...
