-
21.
PREPARATION OF NIOBIUM (V) OXIDE WITH CONTROLLED DISPERSITY AND MORPHOLOGY
-
(Not-set)
-
In this work, the effect of the annealing temperature and the chemical history of the precipitate on the morphology and phase composition of the Nb2O5 powder was studied. Nb2O5?nH2O precipitate and gel-like ...
-
22.
Influence of the Anionic Composition of the Starting Salts on the Preparation of Zinc Orthostannate by the Sol-Gel Method
-
(Not-set)
-
The effect of the anionic composition of zinc salts upon interaction with tin (IV) chloride on the preparation of zinc orthostannate by the sol-gel method was studied. It was determined that the minimum ...
-
23.
Glass Composite Hardening with Multilayer Carbon Nanotubes Aligned with a Constant
Electric Field
-
(Not-set)
-
The effect of the electric field intensity and the percentage of multi-layer carbon nanotubes (MCNTs) on the strength of a composite consisting of unidirectional glass fibers has been studied. The results ...
-
24.
Dielectric Characteristics of Low-Density Spheroplastics Based
on Phenylon and Hollow Ceramic Microspheres in the Centimeter
Microwave Range
-
(Not-set)
-
The dielectric characteristics of heat-resistant spheroplastics based on hollow ceramic microspheres and a heat-resistant binder based on aromatic polyamide - phenylone - have been investigated. The dielectric ...
-
25.
Drilling of Porous Aluminosilicate Ceramics
-
(Not-set)
-
The features of laser drilling of composite highly porous ceramics consisting of aluminosilicates, glass and a small addition of polystyrene (EPS) are studied experimentally. It was found that the formation ...
-
26.
Influence of the Conditions of Mechanochemical Activation on the Physical and Chemical Properties of Zinc Oxide
-
(Not-set)
-
Mechanical activation of zinc oxide with the addition of a surfactant (triethanolamine) in two types of mills - roller-ring vibration and planetary-centrifugal mills is considered. The dependences of the ...
-
27.
Near-Infrared Raman Spectroscopy of Graphitic B-C-N-Materials
-
(Materials and properties)
-
Raman scattering (RS) studies of graphite-like phases BC x N (g-BC x N) obtained by various methods were carried out using an excitation laser operating in the near infrared range. The most typical ...
-
28.
Laser Technology for Removal of Conducting Coatings from Electrowarmed Glassing Products (Review)
-
(Science for glass production)
-
A highly efficient method of laser removal of indium oxide films doped with tin In 2 O 3 (Sn) from the surface of soda-lime-silicate glass used for the manufacture of glazing products for railway transport ...
-
29.
Influence of Gold Nanoparticles on Spectral and Luminescent Properties of Phosphate Glass Doped with Eu3+ Ions
-
(Science for glass production)
-
The spectral-luminescent properties of potassium-aluminophosphate glass containing Eu 3+ ions during thermally stimulated formation of gold nanoparticles in its volume have been investigated. It is shown ...
-
30.
Methods for producing ceramics from metal nitrides (a review)
-
(Science for ceramic production)
-
The main methods of obtaining metal nitrides are considered. The main advantages and disadvantages are highlighted for each method. The possibilities of using these materials in various industries are ...
-
31.
Synthesis of highly doped with boron diamond microcrystals and BC3-heterodiamonds at high pressures and temperatures
-
(Science for ceramic production)
-
The results of the synthesis and analysis of diamond microcrystals with a high degree of boron doping (& # 8776; 2 & # 37;), which were obtained from mixtures of gas soot with M-carborane at 8 GPa and ...
-
32.
Anion-exchange synthesis of copper ferrite powders
-
(At the enterprises and institutes)
-
A method for the synthesis of copper ferrite is proposed, which consists in the anion-exchange precipitation of copper (II) and iron (III) from solutions of their salts in the presence of tartrate ions ...
-
33.
Methods of magnesium aluminate spinel powders synthesis for optically transparent ceramics (a review)
-
(Science for ceramic production)
-
Prospects for the use of optically transparent ceramics made of aluminum-magnesium spinel are considered. The technologies for the synthesis of spinel powders for subsequent use in the production of transparent ...
-
34.
Nanostructured porous aluminium oxide: preparation, properties
-
(Science for ceramic production)
-
The results of studying the process of obtaining porous aluminum oxide, which is a typical self-organizing material, by anodic oxidation of aluminum in acidic solutions are presented. The functional dependences ...
-
35.
Metal oxides as candidate materials in electrochemistry
-
(Coatings)
-
The electrochemical behavior of electrodes with an active layer based on TiO 2 , IrO 2 , RuO 2 , SnO 2 has been studied. The values ??of the current-free potentials are determined. The dependences ...
-
36.
Hydraulic radius evaluation in porous structure of ceramic materials
-
(Science for ceramic production)
-
The analysis of the existing dependences describing the capillary absorption of liquid in porous materials is carried out on the basis of an ideal model and data of mercury porosimetry. It is shown that ...
-
37.
Dipole
relaxation and ion condictivity in SrTiO3/Y0,1Zr0,9O2 ceramic system
-
(Science for ceramic production)
-
The obtained ceramic material of the composition 0.5SrTiO 3 ? 0.5Y 0.1 Zr 0.9 O 2 and the features of its dielectric properties and electrical conductivity have been established. It was found that ...
-
38.
Getting of Ti3SiC2 based materials using SHS compaction under of layered Ti - SiC composition
-
(Science for ceramic production)
-
A new method has been developed for the synthesis of ceramic composites based on Ti 3 SiC 2 using non-powder reaction compositions of titanium and silicon carbide. A ceramic composite with a matrix ...
-
39.
Use of titanium dioxide in development of antibacterial glass enamel coatings
-
(Coatings. Enamels.)
-
The expediency of using titanium dioxide in the development of antibacterial glass enamel coatings has been established. A bactericidal powder (filler) based on hydroxyapatite modified with titanium oxide ...
-
40.
Thermochemical transformation of ilmenite-leucoxene concentrate
-
(Raw materials)
-
As a result of vacuum-thermal treatment of ilmenite-leucoxene concentrate modified with magnesium oxide additives, a porous silicatoferropseudobrukite composite material was synthesized, exhibiting the ...