-
1.
EFFECT OF TECHNOLOGICAL SYNTHESIS PARAMETERS ON THE STRUCTURE, PHASE COMPOSITION, AND PROPERTIES OF POROUS Al2O3–MgO–SiO2–SiC CERAMICS
-
(Not-set)
-
... possibility of targeted control of the structural and functional properties of porous ceramics through optimization of synthesis parameters. This work shows potential for the cost-effective production ...
-
2.
HIGH-PURITY BORON OXIDE WITH CONTROLLED CONTENT OF RESIDUAL WATER AND OH-GROUPS
-
(Not-set)
-
A method for the direct determination of intercalated water in high-purity boron oxide has been developed. Comparative studies of the residual intercalated water and OH-group content in a commercial product ...
-
3.
EFFECT OF CeO2 ON THE STRUCTURE AND PROPERTIES OF ALUMINA-ZIRCONIA CERAMICS PREPARED BY PRESSURELESS SINTERING AND HOT PRESSING
-
(Not-set)
-
... sintering resulted in porosity up to 5 %. Hardness decreased with increasing CeO2 content for both methods. Fracture toughness in pressureless sintered ceramics was primarily controlled by porosity. In ...
-
4.
BIMETALLIC NANOPARTICLES AgAu, AgRb IN ZINC PHOSPHATE GLASS: FORMATION, STRUCTURE, EFFECT ON OPTICAL CHARACTERISTICS OF GLASS CO-DOPED WITH NEODYMIUM IONS
-
(Not-set)
-
Doped zinc-phosphate (ZP) glasses of compositions ZP:Ag:Au and ZP:Ag:Rb were synthesized by the melt quenching method both without and with the use of additional heat post-treatment at T = 500 °C. In the ...
-
5.
CONTROL OF MECHANICAL STRENGTH OF SAFETY GLASSES FOR GROUND TRANSPORTATION DURING THEIR PRODUCTION PROCESS
-
(Not-set)
-
The article describes the study of the effect of the tempering mode on the mechanical strength of products. It shows the effect of the press settings and the temperature in the tunnel furnace chambers ...
-
6.
SOL-GEL SYNTHESIS AND EFFECTS OF NEODYMIUM AND EUROPIUM OXIDES ON THE STRUCTURE FORMATION OF CALCIUM MONOALUMINATE
-
(Not-set)
-
Calcium monoaluminate was synthesized using the sol-gel method and the effect of europium and neodymium oxides on the synthesis and kinetics of structure formation in the temperature range of 500 – 1000 ...
-
7.
EFFECT OF THE SYNTHESIS METHOD ON THE PHYSICOCHEMICAL PROPERTIES AND PHASE COMPOSITION OF ZIRCONIA
-
(Not-set)
-
Hydrated zirconia was obtained by solid state synthesis and precipitation. Physicochemical properties and phase composition of calcined hydrated zirconia was investigated by XRD, IR and DSC-TG. Hydrated ...
-
8.
INVESTIGATION OF THE EFFECT OF QUARTZ TUBES CRYSTALLIZATION ON QUALITY OF BLANKS MADE OF QUARTZ CERAMICS
-
(Not-set)
-
... test to crystallization is carried out. Assessment of effect of impurity mass fraction in quartz concentrates on crystallization of tubes at incoming control, and also on existence of crystal phases in ...
-
9.
PREPARATION OF NIOBIUM (V) OXIDE WITH CONTROLLED DISPERSITY AND MORPHOLOGY
-
(Not-set)
-
In this work, the effect of the annealing temperature and the chemical history of the precipitate on the morphology and phase composition of the Nb2O5 powder was studied. Nb2O5?nH2O precipitate and gel-like ...
-
10.
Control of Laser-Induced Backside Wet Etching of Silica Glass
-
(Not-set)
-
In this work we studied the influence of the laser exposure parameters and the etching solution type on the hollow channels length formed in silica glass by femtosecond laser-assisted backside wet etching. ...
-
11.
Criteria
of a Controllable Process of Producing Heat Insulating Porous Ceramic Materials Using Magmatic Rocks
-
(Not-set)
-
The criteria for achieving a synergistic effect for the improvement and control of the process of obtaining heat-insulating porous materials using igneous rocks of the crystalline basement of the south ...
-
12.
Nickel Layer Control on Metallized Ceramics
-
(Not-set)
-
... at a nickel layer thickness of less than 3 ?m, oxides of elements (aluminum, silicon, manganese, molybdenum) are present in its surface, which are part of the metallization. The existing methods for controlling ...
-
13.
The Dielectric Method for Controlling the Recipe and Technologi-cal Parameters Upon Receipt of Sodium Silicate Materials
-
(Not-set)
-
The results of the study of the dielectric constant & # 949; modified sodium silicate compositions (SNK) depending on the content of the modifying zinc-containing aqueous solution (zinc acetate) and the ...
-
14.
Effect of Combined Use of Mineral Wool Production Waste and Catalytic Cracking Catalyst Waste on the Structure and Properties of Ceramics
-
(Not-set)
-
... that, in comparison with the control composition, MB during firing at a temperature of 1080 ° C acts as a fluxing additive, increasing the density of samples by 3.3 °, compressive strength by 19.2 ° C, ...
-
15.
Ambient Environment Effect on a Polished Surfaces of OF4 and STK19 optical glass
-
(Not-set)
-
A study of the change in the state of the polished surface of optical glasses of STK19 and OF4 grades by ellipsometry, IR spectroscopy and measurement of sample roughness under the influence of the environment ...
-
16.
On the Possibility of Precision Control of Thermal Expansion Co-efficient of Transparent Lithium Aluminosilicate Glass-Ceramics
-
(Materials and properties)
-
For sitalls based on the lithium aluminosilicate system, the possibility of precision regulation of the temperature coefficient of linear expansion (TCLE) near values ??approaching zero in the temperature ...
-
17.
Crystalline phase formation in foamglass and its effect on material performance
-
(Science for glass production)
-
The results of studies on the formation of the crystalline phase in the foam glass matrix, as well as the effect that it has on the operational properties of the material (compressive strength, density, ...
-
18.
Feasibility of dielectric channels as deflectors for accelerated elec-tron beams control
-
(Science for ceramic production)
-
The results of a study of the passage of an electron beam with an energy of 10 keV through dielectric channels made of ceramics (zirconium dioxide) and pyroelectric crystals (lithium niobate) are presented. ...
-
19.
Effect of the environment on the state of optical glass polished sur-face
-
(Science for glass production)
-
The influence of the environment on the state of the polished surface of optical glasses is determined. The shelf life of polished optical parts before coating or bonding has been found to be shorter than ...
-
20.
An efficient float process control of making flat glass
-
(Efficiency and quality)
-
The results of simulation modeling of the technological process control for the production of sheet glass by the float method are presented. the effectiveness of a systematic approach to management is ...