-
1.
Development and service of refractories in truck lining designed for firing of building bricks
-
(Refractories for industry)
-
CJSC "Petrokast Silica" has developed effective refractory materials for lining the hearths of trolleys in tunnel kilns. The trolleys lined with such refractories have been successfully operating ...
-
2.
PROSPECTS OF USING CLAYEY RAW MATERIALS OF THE STOLINSKIE KHUTORA DEPOSIT FOR PRODUCING BUILDING CERAMICS
-
(Not-set)
-
... clinker material, as well as ceramic floor tiles. Samles of building ceramics synthesized in the laboratory using clay from the Stolinskie Khutora deposit had the necessary set of physicochemical and performance ...
-
3.
IMPROVEMENT OF THE PHYSICO-MECHANICAL PROPERTIES OF FACING BRICKS THROUGH HYPERPRESSING BASED ON LOCAL RAW MATERIALS
-
(Not-set)
-
This work examines the main regularities in the formation of cement stone structure and the relationship between the properties of concrete mixes with various fillers and highly compressed materials obtained ...
-
4.
INFLUENCE OF NICKEL SLAGS ON STRUCTURAL CHANGES IN CERAMIC BRICKS
-
(Not-set)
-
During the study using electron microscopy, the structural features of ceramic brick samples with minimum and maximum slag content at the micro-, macro- and meso-level were determined. The method of mercury ...
-
5.
INFLUENCE OF THE MINERALOGICAL COMPOSITION OF CLAYS ON THE CAPILLARY-POROUS STRUCTURE AND FROST RESISTANCE OF CERAMIC BRICKS
-
(Not-set)
-
The influence of the mineralogical composition of clays on the microstructure and frost resistance of ceramic bricks has been studied. The pore radii were calculated by the method of capillary water saturation ...
-
6.
CHARACTERISTICS OF FIRED CLAY BRICKS WITH DOLOMITE POWDER ADDITION
-
(Not-set)
-
The paper analyses the effect of dolomite powder on properties and durability of clay brick. Clay bricks were made from the mix containing from 10 to 30 % of waste dolomite powder and fired at 1000 ?C ...
-
7.
The Phase Composition and Physico-Mechanical Properties at Different Temperatures of Ceramic Firing Earthquake-Resistant Bricks Using Ferroli
-
(Not-set)
-
Ceramic bricks based on low-melting clay and ferro-dust were obtained from self-decaying slags of low-carbon ferrochrome in the temperature range 950 - 1100 ° C, which have grades from M100 to M175, respectively. ...
-
8.
M?ssbauer spectroscopic studies of ferrous oxides, phase com-position and porous structure in ceramic bricks made of coal slate clay and pitch coal slag
-
(Science for ceramic production)
-
A ceramic brick was obtained on the basis of intershale clay and slag from burning brown coal without using traditional natural raw materials. Studies have shown that the ferrous compounds on the surface ...
-
9.
Ultrasonic draw die prototyping for ceramic bricks extrusion
-
(Science for ceramic production)
-
A reduced prototype of a die for extrusion of ceramic bricks with the application of ultrasonic vibrations from a magnetostrictive transducer to the walls of the die was tested. Improved extruder performance. ...
-
10.
Phase composition and porous structure of centenarian ceramic bricks found in a catholic church, in Iviron convent and Rozhdestvenskaya church in Samara
region
-
(At the enterprises and institutes)
-
It was determined by X-ray phase and IR spectroscopic methods of analysis that the strength properties of ceramics, which served for more than 100 years in the buildings of the Catholic Church, the Iversky ...
-
11.
The use of sludge from electroplating industries in ceramic bricks production
-
(Science for ceramic production)
-
The migration of ions of heavy metals (Zn 2+ , Cu 2+ , Cr 3+ , Cr 6+ , Ni 2+ , Fe 2+ and Fe 3+ ) from ceramic bricks containing wastewater sludge from electroplating industries. The regularities ...
-
12.
Thermodynamic Substantiation of the Mechanism of Solid-Phase Transformations in Roasting of Light-Color Ceramic Bricks
-
(Science for ceramic production)
-
The results of thermodynamic modeling of solid-phase processes occurring during the firing of volumetric light-colored ceramic bricks obtained on the basis of refractory clay and artificial flux are presented. ...
-
13.
Production of building materials using technogenic waste
-
(Utilization of waste)
-
The use of man-made waste, primarily from the mining and processing industry, and sludge from biological wastewater treatment of aeration plants of cities and enterprises in the production of large-tonnage ...
-
14.
DEVELOPMENT OF A LOW-TEMPERATURE DECORATIVE GLAZED COATING FOR SOFT-FORMED BRICK
-
(Not-set)
-
The results of research work conducted in collaboration with the “Elite Building Ceramics” brick factory on the development of low-temperature glazed compositions and their application technology to soft-molded ...
-
15.
INVESTIGATION OF PROPERTIES OF CLINKER CERAMICS USING ALBITOPHIR ADDITIVE OF VARIOUS FRACTIONS
-
(Not-set)
-
Abstract. In recent years, the issues of obtaining clinker ceramics have become as relevant as possible, including – this is due to the tasks of import substitution. Clinker ceramics is a product that ...
-
16.
DEVELOPMENT OF CERAMIC BRICK COMPOSITIONS FOR RESTORATION OF HISTORICAL HERITAGES BASED ON LOESS–DEFECATE COMPOSITION
-
(Not-set)
-
They are devoted to the study of the development of composite materials for the production of ceramic bricks based on loess-like rocks from the Suzanly deposit and waste produced by Khorazm Shakar LLC, ...
-
17.
ROAD-PURPOSE CERAMIC BRICK FOR PAVING PAVEMENTS IN THE ARAL REGIONS
-
(Not-set)
-
... surfaces of modern buildings and structures. Along with this, it is important to obtain ceramic pavers based on compositions consisting of mineral and technogenic raw materials that prevent premature wear ...
-
18.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
The effect of the concentration (from 18 to 6 %) of an alkaline activator (AA) solution on the viscosity and basic properties of geopolymer composites based on chamotte with additives of foam glass production ...
-
19.
Lightweight Ceramics with Addition of Waste Production of Mineral Wool and Aluminosilicate Cenospheres of Various Fractions
-
(Not-set)
-
A study of the influence of the addition of aluminosilicate cenospheres (ASC) of 2 fractions on the structure and properties of ceramics with waste from the production of mineral wool (MW) was carried ...
-
20.
Anortite-Containing Construction Ceramics Using Sludge Waste of Metallurgical Production
-
(Not-set)
-
Comprehensive studies of anorthite-containing building ceramics, obtained on the basis of clay and sludge waste from metallurgical production, have been carried out. Component compositions were selected ...
