-
1.
CERAMIC COMPOSITE MATERIALS IN THE Ca2P2O7–Ca3(PO4)2 SYSTEM BASED ON POWDER MIXTURES INCLUDING CALCIUM PHOSPHATE OF NATURAL ORIGIN AND MONOCALCIUM PHOSPHATE MONOHYDRATE
-
(Not-set)
-
Ceramics in the Ca2P2O7–Ca3(PO4)2 system were obtained from powder mixtures containing calcium hydroxyapatite Са10(РО4)6(ОН)2 of natural origin and monocalcium phosphate monohydrate Ca(H2PO4)2·H2O. Fish ...
-
2.
PROPERTIES OF POWDERS SYNTHESIZED FROM AQUEOUS SOLUTIONS OF SODIUM SILICATE AND IRON SULFATE
-
(Not-set)
-
The phase composition of the powder synthesized from aqueous solutions of sodium silicate Na2SiO3 and iron sulfate FeSO4 at the molar ratio Fe/Si = 2 according to X-ray diffraction (XRD) data included ...
-
3.
CERAMIC MATERIALS OF A GIVEN PHASE COMPOSITION BASED ON HYDROXYAPATITE POWDER TREATED IN SOLUTIONS OF AMMONIUM, SODIUM AND POTASSIUM DIHYDROPHOSPHATES
-
(Not-set)
-
Powders of hydroxyapatite (HA) Ca10(PO4)6(OH)2 treated in 0.25M aqueous solutions of ammonium NH4H2PO4, sodium NaH2PO4 and potassium KH2PO4 dihydrophosphates for 1 hour under stirring were used for ceramics ...
-
4.
CERAMICS IN THE Na2O–CaO–SO3 SYSTEM AS A PROMISING INORGANIC POROGEN
-
(Not-set)
-
Ceramics with phase composition after firing in the range of 600 – 900 °C represented by anhydrous calcium sulfate CaSO4, and calcium sodium sulfates (Na0,8Ca0,1)2SO4 and Na6Ca(SO4)4 were obtained from ...
-
5.
Obtaining of High-Porous Ceramic Materials on the Basis of Alumina-Magnesia Spinel
-
(Not-set)
-
The object of research is ceramic foam materials based on aluminum oxide, magnesium oxide and aluminum-magnesia spinel. The results of research on sintering spinel ceramics using aluminum and magnesium ...
-
6.
Thermal Transformations in Hardening Compositions Based on Hydroxyapatite, Monocalcium Phosphate Monohydrate and Polymeric Binders
-
(Not-set)
-
Hardening composite materials based on calcium phosphates (hydroxyapatite, monocalcium phosphate monohydrate) and polymer binders (polyvinyl alcohol, polyvinyl pyrrolidone) have been obtained. It was found ...
-
7.
Ceramics in the Са2Р2О7-Са(РО3)2 System Obtained by Firing of Cement Stone Based on β-tricalcium Phosphate and Monocalcium Phosphate Monohydrate
-
(Not-set)
-
Ceramics in the Ca 2 P 2 O 7 -Ca (PO 3 ) 2 was obtained by firing a cement stone made from a powder mixture containing ?-tricalcium phosphate ?-Ca 3 (PO 4 ) 2 and monocalcium phosphate monohydrate ...
-
8.
Calciumposphate Penokeramics on the Basis of Powder Mixture Hydroxyapatite?Brochites
-
(Biomaterials)
-
Introduction to the impregnating suspension based on hydroxyapatite powder, heat-treated at 800 ° C, 10 - 50 ° C; (by weight) of brushite powder heated at 50 ° C, after firing at 1200 ° C leads to partial ...
-
9.
Development of 3D ceramic structures with assigned architecture in Ca2P2O7-CaNa2P2O7 system
-
(Science for ceramic production)
-
The issues of creating three-dimensional structures of a given architecture based on pyrophosphate ceramics by the method of a removable additive are considered. The problems of filling a polymer negative, ...
-
10.
Powders synthesized from calcium acetate and mixed-anion solution of phosphate- and carbonate-ions for bioceramics production
-
(Biomaterials)
-
From an aqueous solution of calcium acetate and a mixed-anionic (HPO 4 2- / CO 3 2- ) aqueous solution containing ammonium hydrogen phosphate and ammonium carbonate, an X-ray amorphous powder was ...
-
11.
Rheological behaviour of zirconia in acrylate monomers dispersions for 3D-printing applications
-
(Science for ceramic production)
-
The rheological properties of highly concentrated suspensions consisting of nanocrystalline zirconium oxide powders of monoclinic, tetragonal and cubic modification (stabilized at a molar content of yttrium ...
-
12.
Research in highly loaded calcium phosphate slurries for producing shaped bioceramic bodies
-
(Biomaterials)
-
The study of the rheological properties of highly concentrated calcium phosphate suspensions for the creation of bioceramics of complex shape by slip casting and 3D printing has been carried out. Macroporous ...
-
13.
Calcium phosphate powder synthesis from calcium formiate and ammonium hydro-phosphate for bio-compatible resorbable bi-phase ceramics production
-
(Biomaterials)
-
Calcium phosphate powder was synthesized from calcium formate Ca (CHO 2 ) 2 and ammonium hydrogen phosphate (NH 4 ) 2 HPO 4 at the Ca / P ratio in the initial aqueous solutions equal to 1. The ...
-
14.
Reaction bonded resorbable phosphate biomaterials: production and in vitro tests
-
(Biomaterials)
-
The paper presents the properties of reaction-bound calcium phosphate materials obtained by pressing a paste based on ?-tricalcium phosphate followed by holding in various solutions. The phase composition, ...
-
15.
Physico-chemical and processing conditions of glass melt tinting
-
(Science for glass production)
-
The main conditions for the dissolution of dyes in glass melts are considered: chemical interaction, diffusion, distribution in the volume or in a certain layer. The features of continuous volumetric and ...
-
16.
Porosity and solubility of bioactive calcium-phosphate glassceramics for bone endoprosthesis
-
(Biomaterials)
-
The issues related to the solubility of glass-crystalline materials based on calcium phosphate glasses in water and solutions imitating the physiological environment of a living organism are considered. ...
