-
1.
Rheology of slurries based of Mstera clays
-
(Science for ceramic production)
-
The results of experimental studies of the rheological properties of slips based on clay from the Msterskoye deposit of the Vladimir region, modified by breaking sheet glass and soda, are presented. Experimental ...
-
2.
Structure and rheology of semi-finished porcelain upon firing
-
(Science for ceramic production)
-
Data on the rheological behavior of samples of materials of the porcelain group at pure shear were obtained, complementing the results of dilatometric studies of shrinkage. The concept of the macromechanism ...
-
3.
Mineralogy and special features of kaolinite-illite clay rheology
-
(Raw materials)
-
The mineralogical composition, plastic and rheological properties of clays of the Troitskoye and Malo-Arkhangelskoye deposits have been studied. It was found that the clays of these deposits belong to ...
-
4.
Rheology of electroalumina molding compounds
-
(Science for ceramic production)
-
The rheological and structural-mechanical properties of dispersions based on coarse-grained corundum with additives that ensure the production of porous permeable ceramics have been studied. It has been ...
-
5.
ZINC OXIDE POWDERS OBTAINED USING DEEP EUTECTIC SOLVENTS
-
(Not-set)
-
A study was conducted on obtaining powders for microwave dielectrics from zinc oxide using deep eutectic solvents. As a result of using various solvents, a monophase ZnO powder is formed, the particle ...
-
6.
INFLUENCE OF REFRACTORY FILLERS ON THE PROPERTIES OF CERAMICS BASED ON HIGH CONCENTRATED SILICA GLASS SUSPENSIONS
-
(Not-set)
-
Refractory and heat-resistant materials with a coarse-grained and large-porous structure were obtained using silica glass suspensions with mullite, spinel, corundum and quartz fillers. The influence of ...
-
7.
PROPERTIES OF HOLLOW GLASS MICROSPHERES PRODUCED IN A PROPANE-AIR FLARE
-
(Not-set)
-
Hollow glass microspheres from sodium borosilicate glass were obtained by high-temperature method, the composition of mass%: 10 Na2O; 8 CaO; 0,3 MgO; 0,2 Al2O3; 9 B2O3; 0,5 SO3; 72 SiO2. It is established ...
-
8.
COLLOID-CHEMICAL PROPERTIES OF KAOLIN ZHURAVLINY LOG SUSPENSIONS
-
(Not-set)
-
Dispersion characteristics of the Zhuravliny Log kaolin, zeta potential, and apparent viscosity of its suspensions were studied. Kaolin suspensions had rather high stability due to the negative charge ...
-
9.
GEL CASTING METHOD FOR THE PRODUCTION OF CERAMIC MATERIALS
-
(Not-set)
-
Gel casting is one of the new and promising methods for producing ceramics. Modern research on the production of ceramic materials by gel casting covers a wide range of materials, including both dense ...
-
10.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
The effect of the concentration (from 18 to 6 %) of an alkaline activator (AA) solution on the viscosity and basic properties of geopolymer composites based on chamotte with additives of foam glass production ...
-
11.
THE EFFECT OF THE ACRYLATE MONOMER ON THE CHARACTERISTICS OF PHOTOPOLYMERIZABLE SUSPENSIONS FOR THE PRODUCTION OF CERAMICS FROM STABILIZED ZrO2
-
(Not-set)
-
The influence of the structure and properties of acrylate monomers on the rheology and polymerization of suspensions containing partially stabilized zirconium dioxide, a dispersant and a photoinitiator ...
-
12.
Drilling of Porous Aluminosilicate Ceramics
-
(Not-set)
-
The features of laser drilling of composite highly porous ceramics consisting of aluminosilicates, glass and a small addition of polystyrene (EPS) are studied experimentally. It was found that the formation ...
-
13.
The Influence of Molarity and Temperature of the Alkaline Activator Solution on the Rheological Properties and Structure Formation of Alkaline Activated Refractory
Materials
-
(Not-set)
-
The effect of molarity (from 3.64 to 1.74 M) of a solution of an alkaline activator (ALA) and temperature (from 10 to 20 ° C) of a mixture of alkali-activated materials (ALA) based on chamotte and metakaolin ...
-
14.
Microstructural and Rheological Characteristics of the Water and Clay Suspension Containing Particles of Montmorillonitovy Clay
-
(Raw materials)
-
Rheological and microstructural characteristics of aqueous suspensions of montmorillonite clays containing solid phase particles with dimensions d & # 8804; 160 microns. The dependences of the conditional ...
-
15.
Interrelation of Structure with Whiteness and Transparency in Soft Porcelain
-
(Science for ceramic production)
-
The structures of two types of soft porcelain (bone china and parian) have been investigated. The features of the structure of these materials are revealed, which determine the combination of pronounced ...
-
16.
Improving Technology of Ceramic High-Porous Permeable Cellular Materials
-
(Science for ceramic production)
-
The rheological properties of corundum suspensions have been investigated. It is shown that for the preparation of corundum slip in the preparation of ceramic highly porous permeable cellular materials ...
-
17.
Additive techniques for ceramics manufacturing
-
(Science for ceramic production)
-
A review of publications devoted to additive technologies used in the production of ceramic products is presented. Methods for molding articles from sedimentation-resistant systems are described in most ...
-
18.
Glassware forming (a review)
-
(Science for glass production)
-
Various methods of forming glassware, their physicochemical and technological features are considered. At the same time, the structural and deformation characteristics of glass-forming melts, the performance ...
-
19.
Influence of pigments on the properties of the colored slips for porcelain production
-
(Science for ceramic production)
-
The effect of the introduction of different types of ceramic pigments into the slip on the change in its properties has been studied. Pigments have an emaciating effect on the slip and increase the rate ...
-
20.
Rheological characteristics of the slips in the production of heat-resistant lithium aluminum silicate ceramics
-
(Raw materials)
-
The effect of various electrolytes (soda ash, water glass, sodium tripolyphosphate) and their combinations, as well as thinning additives (Terrablend, Complex M, Fluimis FL70, Fluicer PD96 / F, Hydrocer ...
